Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol 8:1 Engine ratio, what is your compression Go To Bottom

Printable Version  
[ Total Views: 551 | Total Replies: 2 | Thread Id: 101249 ]
« View Previous Thread View Next Thread »
Author: Subject:  8:1 Engine ratio, what is your compression
MemberCamo
A.k.a.: Kev
Custom Title Time!
*****

Avatar


Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline

Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue

posted on March 16th, 2013 at 10:54 AM
8:1 Engine ratio, what is your compression

Hi all,

I know there will always be variation in relation to this question pending on cam etc, but just after a ball park figure to compare my compression.

No, I don't want to pull my motor out, strip it down and measure everything at this stage. If the motor comes out, then that is different.

So if anyone can tell me their compression ratio and what their current compression is, that would be great.

Thanks, Kev
(My brain is always thinking ;))



I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!

Click here for my (slowy) modded 1961 Beetle build.
MemberSuperOwen
Fahrvergnugen
****

No Avatar


Posts: 868
Threads: 67
Registered: January 18th, 2009
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on March 16th, 2013 at 11:06 AM



It really does vary heaps, leak down test would be a better check. Otherwise your mainly looking for even readings between the cylinders.
Membervwo60
Veteran Volks Folk
*****

Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on March 16th, 2013 at 11:20 AM



My 2275 runs a 10.8 to 1, fk87 cam and pauter 1.4 rockers, 48DRLA's, has the heads, exhaust to make it work, idles at 900rpm, drives normaly from about 1500rpm and has good usable torque, but steps it up at about 4000rpm and pulls hard from then on to the rev limiter at 7000rpm. did a compression test the other day, hot at 165 to 170 per cylinder.


 Aussieveedubbers Navigation Symbol Tech Talk Navigation Symbol 8:1 Engine ratio, what is your compression   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.7% - SQL: 98.3% ]