| [ Total Views: 1220 | Total Replies: 23 | Thread Id: 104417 ] |
|
|
 splat
Learner Dubber
Posts: 7
Threads: 3
Registered: October 30th, 2013
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 17th, 2013 at 08:11 PM |
|
|
Building a 2276. need help on supliers of parts.
Gday. Newbie here.
Im looking at building a 2276 and was wondering on who could help me with parts in Australia. Ive got some parts from Vollks.com but was wandering if
Cip1 was any good? Who in Australia is a good supplier?
Any info would be great or even a link to an old post.
Cheers
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on December 17th, 2013 at 09:00 PM |
|
|
http://forums.aussieveedubbers.com/viewtopic.php?tid=104286
you could do a Subaru motor even 
http://www.youtube.com/watch?v=PnEJiY3yEWk
|
|
|
cnfabo
Custom Title Time!
Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 17th, 2013 at 09:00 PM |
|
|
Try rod penrose
|
|
|
ian.mezz
Wolfsburg Elder
I never said, I could write or spell
Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy
|
| posted on December 17th, 2013 at 09:03 PM |
|
|
and here
.
http://www.thesamba.com/vw/classifieds/cat.php?id=69
|
|
|
Lateral
A.k.a.: Greg Hanley
Wolfsburg Wizard
Posts: 480
Threads: 76
Registered: September 30th, 2011
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 18th, 2013 at 04:48 PM |
|
|
I suggest Rod.
|
|
|
gordysbeetle
Seriously Crusin Dubber
Posts: 125
Threads: 19
Registered: June 20th, 2011
Member Is Offline
Location: Bathurst
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 18th, 2013 at 06:28 PM |
|
|
I got a 2276 from Rod. very happy
|
|
|
Performance Upholstery
Officially Full-On Dubber
Posts: 229
Threads: 10
Registered: November 13th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 18th, 2013 at 11:48 PM |
|
|
Seriously, rod is the only guy to talk to.
Performance Upholstery
Cars, boat seats, furniture and more!
0439002870
performanceupholstery@live.com.au
Mt Gravatt east Qld.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 19th, 2013 at 07:17 AM |
|
|
If you are building the engine yourself you will save a reasonable amount importing the parts yourself, as long as you know what you are buying, I
have just bought enough parts to build a 2054 from DRD racing heads in the states, he sends them using USPS and the freight cost is reasonable, just
factor the freight into the overall cost of the item weather it is from the US or Australia, I have found some of the freight costs quoted here quite
expensive, my aluminium case was $1300 AUS delivered, this also include main and big end bearings.
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on December 20th, 2013 at 03:36 PM |
|
|
Bear in mind that buying from overseas will make it difficult (usually impossible ) for refunds on warranty issues or incorrect parts.
What if, for example, you discover an air bubble in the combustion chamber in one of your new heads. It has happened.
Buying locally (Australia ) may be dearer, but it gives you a better chance if something goes wrong.
Can be a bit of a gamble.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 20th, 2013 at 05:35 PM |
|
|
In fifteen years of importing parts I have never had a issue, pick up the phone and talk to the shop overseas and establish a repour, plenty of issues
have happened here with parts purchased from Australian resellers without a good outcome..
|
|
|
Stanley
Compulsive Aussie Vee Dubber
I guess the reward is in the doing of it
Posts: 4523
Threads: 270
Registered: March 13th, 2003
Member Is Offline
Location: Karalee...near Ipswich Qld
Theme: UltimaBB Psyche Grey
Mood: caught a bolt of lightning cursed the day I let it go
|
| posted on December 20th, 2013 at 08:26 PM |
|
|
If you must buy OS try Pierside Parts...I've never had an issue with them.
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on December 20th, 2013 at 08:49 PM |
|
|
I bought a part from a leading QLD supplier for $275............I have ordered the same part today from a OS supplier and its costing me $85. And they
wonder why we don't buy local.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 20th, 2013 at 08:53 PM |
|
|
exactly
|
|
|
Performance Upholstery
Officially Full-On Dubber
Posts: 229
Threads: 10
Registered: November 13th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 21st, 2013 at 12:03 AM |
|
|
I have done the sums on the comparison of buying the same parts from rod and pierside, costwise it showed up the same....
Performance Upholstery
Cars, boat seats, furniture and more!
0439002870
performanceupholstery@live.com.au
Mt Gravatt east Qld.
|
|
|
petemart
Seriously Crusin Dubber
Posts: 105
Threads: 18
Registered: October 5th, 2010
Member Is Offline
Theme: UltimaBB Pro Charcoal
|
| posted on December 23rd, 2013 at 10:06 AM |
|
|
| Quote: | Originally
posted by vwo60
If you are building the engine yourself you will save a reasonable amount importing the parts yourself, as long as you know what you are buying, I
have just bought enough parts to build a 2054 from DRD racing heads in the states, he sends them using USPS and the freight cost is reasonable, just
factor the freight into the overall cost of the item weather it is from the US or Australia, I have found some of the freight costs quoted here quite
expensive, my aluminium case was $1300 AUS delivered, this also include main and big end bearings.
|
Interesting you talk about DRD as an example as I tossed up between buying a pair of CB oval port heads off Rod and a set of DRD L6's for a few weeks
and eventually went with the DRD CNC L6's as I thought they would be amazing.
They look good, but their not mind blowing.
I have an fairly fundamental issue with the fact that the CNC match ported manifolds are not aligned with the inlets on the heads so there is a 1-2mm
step at the bottom when looking down the manifold which tells me there is no checking of his own product when things are packaged.
I'm not confident I won't find more problems with the heads when I start building the motor.
Darren was responsive to the issue at first but he has done nothing about it after over 2 months and now he wont answer emails so I guess it's an
additional cost for me to factor into the total cost to get them sorted over here.
I wouldn't use him again or tell anyone else to use him if he can't get his own product perfect before it's sent out.
It's a gamble and I feel the smaller guys think they can just blow us off.
Everything else DRD sells is Scat and 'his' cams are actually Steve Long Racing cams.
Rod Penrose has all the Scat and AA products here for the same price once you factor in postage.
Talk to Rod Penrose as he knows what parts/engine combo's work and what don't.
|
|
|
Governor
Wolfsburg Wizard
Posts: 414
Threads: 23
Registered: November 22nd, 2008
Member Is Offline
Location: in your mind
Theme: UltimaBB Pro Blue ( Default )
Mood: yes please
|
| posted on December 23rd, 2013 at 11:43 AM |
|
|
I have used DRD and never has a problem.
A mate has just had a 2276 built with one of Darrens kits and again not a problem.
|
|
|
gordysbeetle
Seriously Crusin Dubber
Posts: 125
Threads: 19
Registered: June 20th, 2011
Member Is Offline
Location: Bathurst
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 23rd, 2013 at 05:03 PM |
|
|
| Quote: | Originally
posted by vwo60
If you are building the engine yourself you will save a reasonable amount importing the parts yourself, as long as you know what you are buying, I
have just bought enough parts to build a 2054 from DRD racing heads in the states, he sends them using USPS and the freight cost is reasonable, just
factor the freight into the overall cost of the item weather it is from the US or Australia, I have found some of the freight costs quoted here quite
expensive, my aluminium case was $1300 AUS delivered, this also include main and big end bearings.
|
I was just on Rods website and he sells those cases for $80.00 less than you paid. I will spend my money in Australia and with our
forum sponsors
|
|
|
petemart
Seriously Crusin Dubber
Posts: 105
Threads: 18
Registered: October 5th, 2010
Member Is Offline
Theme: UltimaBB Pro Charcoal
|
| posted on December 23rd, 2013 at 05:57 PM |
|
|
| Quote: | Originally
posted by Governor
I have used DRD and never has a problem.
A mate has just had a 2276 built with one of Darrens kits and again not a problem.
|
I guess I'm one of guys who didn't get the product they paid for and is now being ignored. It's such a basic mistake on his behalf I though he
would have just shipped another pair and be done with it.
There seem to be a few on the Samba he hasn't dealt with very well as well.
No one gives a warranty, but for a guy new to the scene someone like Rod could put together a complete 2276 with a set of 42x37.5 cnc heads, a K8 or
Web 86b cam and all the AA (or scat) parts drd resells and at least have a supplier who would run it in and dyno it before it gets shipped.
Can you tell I've got the shits with DRD? 
|
|
|
fish26
A.k.a.: benito
Fahrvergnugen
Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome
|
| posted on December 23rd, 2013 at 07:09 PM |
|
|
I didn't get that impression at all Pete, we just had a set of CB Los Panchitos with most of the same issues we discussed but for the landed price
they are good value considering a bit of massaging will go into them to get right, seems cnc ported heads are initially cheaper to buy because of the
large quick production run and machine limitations.
Having paid for match ported manifolds being 2mm out is a total no no and Darren should sort that shit out quick smart.
Otherwise never had any issues with US stuff especially CB Performance except the Panchitos, but I half expected that.
bitten by the bug..........several times
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 23rd, 2013 at 07:36 PM |
|
|
Never had a issue with any parts from overseas, when the dollar was higher it was a lot cheaper, will not take to long for parts bought in Australia
to go up proportional to the drop in the dollar then the case will not be cheaper, if you read my post the case came with steel backed main bearing,
big end bearings and was machined for a sand seal and supplied with the seal, you did not mention Rods cost of shipping, please add this to the cost
as well. over most Australian resellers years ago,
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on December 24th, 2013 at 12:11 AM |
|
|
I have never had a match port manifold that I'm happy with 'out-of-the-box' using CB 044's, Los-Panchitos and Scat heads. It's due to the large
mounting holes in the manifolds allowing movement in the connection. A sleeving job is required to remidy the problem.
It comes down to what your prepared to assemble.
Good luck with your build.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on December 24th, 2013 at 08:11 AM |
|
|
Sleeving is a great and easy mod to do, but Pete's DRD "match ported" manifolds have a different port shape to the DRD head's inlet
port........sleeving the manifold stud holes won't fix that !!!!
|
|
|
Super1302
Officially Full-On Dubber
Posts: 361
Threads: 76
Registered: July 31st, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 26th, 2013 at 07:55 PM |
|
|
i have never seen matched port manifolds offered with los panchitos (looking at the CB site) unless you order to suit them. i did my own matching
porting for these heads. you ask, you get i believe, i asked for 650 springs and they had to machine extra on my Los Panchitos to fit them.... Rod is
good
|
|
|
splat
Learner Dubber
Posts: 7
Threads: 3
Registered: October 30th, 2013
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 7th, 2014 at 06:43 PM |
|
|
Thaks guys.
To build or buy hmmm
|
|
|
