| [ Total Views: 572 | Total Replies: 5 | Thread Id: 104485 ] |
|
|
 giro-pilot
Commited Dubber
Posts: 72
Threads: 55
Registered: June 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 24th, 2013 at 05:32 PM |
|
|
coil troubles
I got a 74 beetle the coil got hot and stop working the coil was in for about 3 weeks
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on December 24th, 2013 at 05:33 PM |
|
|
What coil was it?
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
giro-pilot
Commited Dubber
Posts: 72
Threads: 55
Registered: June 6th, 2011
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on December 24th, 2013 at 05:38 PM |
|
|
no name it black just a date 20 12 03
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on December 25th, 2013 at 01:49 AM |
|
|
It may be the wrong type of coil or it could be wired incorrectly.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
65standard
Officially Full-On Dubber
Posts: 373
Threads: 47
Registered: April 18th, 2009
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue
Mood: Only when I'm in it.
|
| posted on December 25th, 2013 at 08:05 PM |
|
|
Try and get a Bosch coil. Also, check if connector 15 on the coil(should be black wire) is connected to your auto choke/Reverse light switch and that
connector 1 on the coil is connected to the condenser (should be a green wire). Check and make sure all connections are tight and no bare wires. You
may also want to check your condenser and points.
Hot coil can cause you grief.
Hope this helps.
[size=4]If it ain't broke, fix it till it is![/size]
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on December 30th, 2013 at 04:19 PM |
|
|
VW's use a non resistor coil.
Resistor coils usually have 'use with resistor' on them somewhere.
I have one here which has it on a paper label which is falling off.
It has 12R stamped on the bottom.
The coil on the bench from my beetle has 12V stamped on it
Otherwise they look the same.
The only way to know for sure is to measure the resistance.
Measure between terminals 1 & 15 (the two little bolts where the wires bolt on) with an ohmmeter.
It should measure 3.1 to 3.3 ohms (or thereabout)
A resistor coil has only 1.6 ohms.
I have removed the wrong coil from several VW's recently.
It's an easy mistake to make if you are not aware of the difference.
|
|
|
