| [ Total Views: 1193 | Total Replies: 5 | Thread Id: 105442 ] |
|
|
 clyve
Officially Full-On Dubber
Posts: 310
Threads: 93
Registered: February 19th, 2011
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Blue ( Default )
Mood: painfully happy
|
| posted on March 16th, 2014 at 04:58 PM |
|
|
type 3; squareback
Best way to drop the front end of my 73 squareback is it splines (from where) or weld in adjuster only want to drop a bit but nothing to time
consuming
Cheers
|
|
|
BRUTUS
A.k.a.: et tu, Brute
Officially Full-On Dubber
Posts: 255
Threads: 17
Registered: February 8th, 2006
Member Is Offline
Location: Brutus has retyred
Theme: UltimaBB Pro Grey
Mood: ACE 30 FOR SALE!
|
| posted on March 17th, 2014 at 07:40 PM |
|
|
Do you have to? Raising the rear slightly can lower the front. It is common for the rear to sag with time... Can be good to get the rear at the
"right" height before touching the front.
You don't weld adjuster in for type 3, that is for beetles which cannot be lowered other ways.
Drop by one spline (bottom bar), rather than 2 or 3 if you must... ie. beware of it being so low that the upper arms rest on the rubber bump stops.
ACE 30 & 40 oils: specifically engineered for your Air Cooled VW
delivered (free del.) throughout Yarra Valley / Ranges, & Gippsland areas. Also ACE 20, 50 & 90.
FOR SALE: ACE 30, 40 etc. Oil formulations & Trade-names.
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on March 17th, 2014 at 08:43 PM |
|
|
Remember they are like the rear of any ac vw, the inner and outer splines are different so you can set the suspension height exactly anywhere you
want, 5mm higher, 22mm lower, whatever you need. But Brutus is onto it with the sagging rear too.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on March 18th, 2014 at 08:37 AM |
|
|
yeah the rear always sag on type 3, eventually anyway.
I would run is close to stock height, slightly lower maybe 15mm at the most before you loose caster at the front and degrade the handling.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
clyve
Officially Full-On Dubber
Posts: 310
Threads: 93
Registered: February 19th, 2011
Member Is Offline
Location: sunshine coast
Theme: UltimaBB Pro Blue ( Default )
Mood: painfully happy
|
| posted on March 18th, 2014 at 06:33 PM |
|
|
thanks
As usual I bow to the knowledge. Will do the ass first cheers
|
|
|
empi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous
|
| posted on March 19th, 2014 at 08:49 AM |
|
|
Outer splines on the front
"If at first you don't succeed, skydiving is not for you." - Anonymous  |
|
|
