| [ Total Views: 1170 | Total Replies: 6 | Thread Id: 106504 ] |
|
|
 landfall
Officially Full-On Dubber
Posts: 290
Threads: 36
Registered: June 4th, 2014
Member Is Offline
Location: Hobart Tassie
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 1st, 2014 at 04:36 PM |
|
|
RH Bends = Bad vibration
At 80kph on RH bends the front gets up the shakes that nearly tears the steering wheel out of my hands.
Have fitted new shockers (Gas) new 3/4" sway bar, serviced the wheel bearings and checked for excessive play in the ball joints.
All to no avail.
Have not checked wheel alignment.
Any suggestions gratefully received.
Ken
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 1st, 2014 at 05:18 PM |
|
|
what sort of car?
Strut front or beam?
Futue te ipsum!!!
|
|
|
landfall
Officially Full-On Dubber
Posts: 290
Threads: 36
Registered: June 4th, 2014
Member Is Offline
Location: Hobart Tassie
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 1st, 2014 at 05:48 PM |
|
|
Beam, 1976 ball joint.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on July 4th, 2014 at 09:33 AM |
|
|
what are the tyres like? kinda sounds like there might me a bulge/bubble in one of the tyres.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on July 4th, 2014 at 12:05 PM |
|
|
Any play in the torsion arms into the tubes that house the needle bearings? Mind you these usually cause a 70 kph shimmy on straight operation.
Didn't use an aftermarket pitman arm? I got stung by using a yank one (LHD) and they aren't interchangeable. Just thinking with the phenomenon
during right turn operation, whether the individual wheels are turning at appropriate rates.
Front end doesn't feel loose / wonder in any other senarios?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
landfall
Officially Full-On Dubber
Posts: 290
Threads: 36
Registered: June 4th, 2014
Member Is Offline
Location: Hobart Tassie
Theme: UltimaBB Pro Blue ( Default )
|
| posted on July 5th, 2014 at 07:23 AM |
|
|
Found the problem.
Shockers were bottomed out, needs lowered shocks.
Car has been lowered using the cut or remove some torsion leaves method we think.
Put a pair of old shocks on the front which have 25mm of downward movement left operational, took it for a drive, vibration gone.
Now looking for suitable shocks.
Any suggestions?
Ken
|
|
|
hellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
Posts: 5080
Threads: 116
Registered: April 17th, 2003
Member Is Offline
Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less
|
| posted on July 9th, 2014 at 04:29 PM |
|
|
I have a set of 2 inch shorter kyb shocks if you need them.
Brand new, send me a PM if you interested
|
|
|
