| [ Total Views: 1154 | Total Replies: 8 | Thread Id: 107465 ] |
|
|
 TrevK
Learner Dubber
Posts: 8
Threads: 2
Registered: October 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 23rd, 2014 at 02:45 PM |
|
|
L bug bonnet hinge springs
Doe's anyone here, know where I can get either replacement hinges or struts to replace the springs on my 1975 L bug.
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12770
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 23rd, 2014 at 05:42 PM |
|
|
pain in the arse job
A "VW fail" that one.
easiest is to disconnect the springs and use a prop stick.
the problem is the spring bends and sends the circlip flying.
That then tries to send the hinge through the top apron bit in front of the windscreen
I have seen struts - but they really need some tabs welded into place
Best answer is to drill the stubs for the circlips out and replace with bolts
BIG job that requires holes to be cut and welded back up
Futue te ipsum!!!
|
|
|
TrevK
Learner Dubber
Posts: 8
Threads: 2
Registered: October 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 23rd, 2014 at 06:32 PM |
|
|
Thanks Bizarre, that is the reason why I need new ones. Have repaired the damage and want to avoid it, might have to build a fancy prop stick.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on October 23rd, 2014 at 08:36 PM |
|
|
I should have a pair of hinges with springs,i will check tomorrow.PM if you need them as i hate finding the parts and someone else makes the sale.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8647
Threads: 562
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on October 23rd, 2014 at 09:59 PM |
|
|
Hi
To overcome this problem I drilled out the original circlip stud and fitted a bolt instead. This is fairly easy on passenger side, but on the drivers
side I needed to cut a larger hole with a hole saw.
Steve
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
TrevK
Learner Dubber
Posts: 8
Threads: 2
Registered: October 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 24th, 2014 at 06:18 AM |
|
|
Thanks for that Steve, if I can get a new set I will do that, have the dash out for rust repairs, so I should be fairly easy.
|
|
|
TrevK
Learner Dubber
Posts: 8
Threads: 2
Registered: October 20th, 2014
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 24th, 2014 at 06:21 AM |
|
|
| Quote: | Originally
posted by grumble
I should have a pair of hinges with springs,i will check tomorrow.PM if you need them as i hate finding the parts and someone else makes the sale.
|
That would be great Grumble.
|
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12770
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 24th, 2014 at 06:49 AM |
|
|
Definitely do the bolt modification. Half the problem is the groove on the post wears and stops allowing the circlip to hold correctly
Futue te ipsum!!!
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8647
Threads: 562
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on October 24th, 2014 at 06:52 AM |
|
|
My bonnet doesn't rock around at all, I tightened the nut & bolt to just allow the hinge to move, I tried doing gas struts but gave up
|
|
|
