Subject: Who machines barrels in SE-QLD? (for Deck Height revision)
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on January 6th, 2015 at 07:34 PM
Who machines barrels in SE-QLD? (for Deck Height revision)
Good evening AVD-ers,
I have a deck height of 4mm (0.157 inch), want to shave base of barrels to bring this down to 1.5mm (0.06inch) for squish/quench. Anyone a machinist
here or can refer / recommend a machine shop in SE-QLD?
I don't want to swap rods. already been balanced & assembled. Same goes for pistons, already balanced. (94 x 74, alum case, 5.4 rods). Should'a
got the 5.5 rods, i know i know!
Will then remove cc's from the heads by relieving around the bigger valves to balance comp rat. Currently with 4mm deck its at 7.6:1.
Thanks,
Chris.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Performance Upholstery
Officially Full-On Dubber
Posts: 229
Threads: 10
Registered: November 13th, 2013
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on January 6th, 2015 at 08:26 PM
Dave Butler
Performance Upholstery
Cars, boat seats, furniture and more! 0439002870
performanceupholstery@live.com.au
Mt Gravatt east Qld.
