| [ Total Views: 1749 | Total Replies: 5 | Thread Id: 113084 ] |
|
|
 lauzboy
Seriously Crusin Dubber
Posts: 175
Threads: 42
Registered: March 29th, 2005
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 7th, 2018 at 07:38 PM |
|
|
clutch cable replacement help
Im replacing the clutch cable on my 72 Bug. I've fed the cable back down the tube and now trying to hook the cable eye onto the pedal hook.
I've spent about an hour fiddling and swearing, and trying various things but no luck.
What am i doing wrong? I feel like i'm missing something simple
Thanks in advance
Jon
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on February 7th, 2018 at 08:14 PM |
|
|
Have you pulled the pedal cluster out, the cable is fitted to the hook before the cluster is slipped back into place. Obviously this is a bit tricky
and is easier with someone to help by holding a little pressure on the cable as you slide the cluster back in, this stops the cable twisting on the
hook or dropping off. The pedal rake will have to be adjusted afterwards for correct brake master cylinder push rod clearance.
|
|
|
lauzboy
Seriously Crusin Dubber
Posts: 175
Threads: 42
Registered: March 29th, 2005
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 7th, 2018 at 08:17 PM |
|
|
ive tried pulling the pedal cluster out, but cant get it all the way thru the opening. The clutch pedal hook gets caught up on the edge of the hole,
no matter which way i try it.
I'll try again tomorrow
thanks mate
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 8th, 2018 at 06:03 PM |
|
|
did you pull the accelerator shaft out of the way??? not sure if it gets in way on a super
|
|
|
Old Dubber
Wolfsburg Wizard
Posts: 605
Threads: 25
Registered: August 26th, 2002
Member Is Offline
Location: Everton Hills, Brisbane, QLD, Australia 4053
Theme: UltimaBB Pro Blue ( Default )
Mood: great!
|
| posted on February 8th, 2018 at 07:33 PM |
|
|
And another little trick.
when you get the cable yoke over the clutch hook, wrap a fat rubber band over it to hold it together.
|
|
|
lauzboy
Seriously Crusin Dubber
Posts: 175
Threads: 42
Registered: March 29th, 2005
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 9th, 2018 at 07:15 AM |
|
|
thanks guys
i managed to get the pedal assembly out. i didnt realise there was another circlip holding the brake shaft to the clutch shaft.
didnt need the rubber band but good tip for next time
|
|
|
