| [ Total Views: 1596 | Total Replies: 17 | Thread Id: 20613 ] |
|
|
 speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on March 24th, 2004 at 07:36 PM |
|
|
Custom exhaust 4 Subaru EJ20T?
I have a clearance problem with the WRX install in the Spyder. The right side merged part of the exhaust just touches the chassis and I need to change
by only about 25mm. The merg is cast so I can't just cut and shut. What do people suggest for the new header. If I'm going to make a new one I might
as well get the best design I can.
4 into1?, 1.5" at each head x 2" collector and a 2.5" up pipe?
Lets hear it!
[Edited on 21-4-2004 by speedster356]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on March 24th, 2004 at 08:50 PM |
|
|
Hi Peter
I was talking to my exhaust guy the other day about making headers for rexys, he said most people that fit larger headers complain of lack of low end
torque.
1302Steve
|
|
|
ricola
Wolfsburg Wizard
Posts: 437
Threads: 9
Registered: February 5th, 2003
Member Is Offline
Location: UK
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 25th, 2004 at 09:32 PM |
|
|
I have seen quite a few non turbo exhaust manifolds cut and welded so I'm sur eyou could modify your existing one.
Just to add to what Steve was saying. People have also reported good gains from match porting the standard manifold ports to the heads. Not actually
too much work and as you have the headers off it would be rude not to 
Rich
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on March 25th, 2004 at 10:21 PM |
|
|
This has cast merged sections so I would rather not have to cut and weld cast steel?. I could see what an NA EJ20 manifold is like as I think they are
all carbon steel or S/S.
Hows the projects going Richard?
Rigoli Motorsport mentioned the 4:1 but not tube sizes.
[Edited on 25-3-2004 by speedster356]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
555bug
Custom Title Time!
WRX Bug Boy
Posts: 1123
Threads: 79
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Vintage
Mood: turbo charged
|
| posted on March 26th, 2004 at 11:38 AM |
|
|
I'm no expert but I would suggest that the headed be reasonable small, say 1.5inch to help keep the exhaust gas velosity up. I would not bother
making equal length primaries as ther eis little in the way of gains. From the turbo I would recomend 3'' tubing as it really does make a
differance from my experiance, I'd also make up a wastgate dump pipe from some 1'' that enters tha exhaust just before the cat. This really helps
things out and as an added benifit you can flange it and put on a screamer pipe when you are racing (we all love flames  ) The only downside to a system like this is that the car will sound like a
council bus at idle but who cares at 8k |
|
|
Jenny
Officially Full-On Dubber
Posts: 352
Threads: 20
Registered: June 26th, 2003
Member Is Offline
Location: Brisbane south
Theme: UltimaBB Pro Blue ( Default )
Mood: Is it Friday yet?
|
| posted on March 29th, 2004 at 07:26 AM |
|
|
This site has good info on WRX tuning, including exhaust size
http://www.mrtrally.com.au/performance/
|
|
|
hotdog008
Commited Dubber
Posts: 61
Threads: 8
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 29th, 2004 at 09:09 PM |
|
|
use steel pipe 40mm id (the same size as the ports)
use cast steel pipe bends (that match the pipe)
10 or 12mm plate cut out the shape of gaskets
for the flanges
this is just my opinion after talking to 3000 people
when i made my own
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
hotdog008
Commited Dubber
Posts: 61
Threads: 8
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 29th, 2004 at 09:13 PM |
|
|
Another Picture!!
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on March 29th, 2004 at 09:56 PM |
|
|
Hadn't thought about running it behind the engine (In my case, mid mounted) but that might be a goer. So you used sch10 pipe for the manifold?
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on March 29th, 2004 at 10:08 PM |
|
|
Hi
Hotdog your system looks much nicer than the factory one, I guess it would also have better clearance as well.
1302Steve
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on March 30th, 2004 at 09:19 AM |
|
|
I like the look of these, but you don't get that boxer note.
[Edited on 21-4-2004 by speedster356]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
Doug Sweetman
Veteran Volks Folk
Nil Bastardo Carborundum
Posts: 2128
Threads: 58
Registered: September 23rd, 2002
Member Is Offline
Location: Perth, W.A
Theme: UltimaBB Pro Blue ( Default )
Mood: sweeeeet
|
| posted on March 30th, 2004 at 10:28 AM |
|
|
Hey hotdog - looks like we have another EJ20T powered beetle in the world. What year and how far through the conversion are you ?
|
|
|
hotdog008
Commited Dubber
Posts: 61
Threads: 8
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 30th, 2004 at 05:12 PM |
|
|
not a beetle a buggy
give me 2 months to have it on the road
by the way i also said this 2 months ago
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
hotdog008
Commited Dubber
Posts: 61
Threads: 8
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 30th, 2004 at 05:14 PM |
|
|
more pic
|
|
|
hotdog008
Commited Dubber
Posts: 61
Threads: 8
Registered: September 2nd, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 30th, 2004 at 05:21 PM |
|
|
any questions
i think i could answer most subi problems
and know i even know how to post pics
which i have of most bits and piceis
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on April 6th, 2004 at 07:18 PM |
|
|
Decided to build just the two merged sections under each head and pull the right one in about 40mm to clear the frame. The head porting is favouring
the forward merg so this seems to be the best solution.
Now were are those 1.5" bends?
:beer
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on April 8th, 2004 at 08:02 PM |
|
|
mmm
we wanna see more buggy PICS :>
|
|
|
MikeM
Custom Title Time!
Buggy Head
Posts: 1429
Threads: 71
Registered: August 7th, 2003
Member Is Offline
Location: Brisbane North Side
Theme: UltimaBB Pro Blue ( Default )
Mood: :duh
|
| posted on April 13th, 2004 at 01:55 PM |
|
|
| Quote: | Originally
posted by Buggy Brad
we wanna see more buggy PICS :>
|
Yeah, cool buggy, got any more pics?
Those seats look great too? Are they beard? Where did you get them from?
Mike
|
|
|
MikeM
Custom Title Time!
Buggy Head
Posts: 1429
Threads: 71
Registered: August 7th, 2003
Member Is Offline
Location: Brisbane North Side
Theme: UltimaBB Pro Blue ( Default )
Mood: :duh
|
| posted on April 13th, 2004 at 02:12 PM |
|
|
| Quote: | Originally
posted by MikeM
| Quote: | Originally
posted by Buggy Brad
we wanna see more buggy PICS :>
|
Yeah, cool buggy, got any more pics?
Those seats look great too? Are they beard? Where did you get them from?
Mike
|
Ok, I've now found the other post with the photos....
|
|
|
speedster356
A.k.a.: Peter Mcleod
Custom Title Time!
Plastic not Classic Racing
Posts: 1624
Threads: 256
Registered: August 25th, 2002
Member Is Offline
Location: CHRIST church NZ
Theme: UltimaBB Pro Blue ( Default )
Mood: Producing boost again in NZ
|
| posted on April 14th, 2004 at 08:59 PM |
|
|
Exhaust just about finished.
[Edited on 21-4-2004 by speedster356]
Spyder-WISD 07-09-05 11.6s @ 125 MPH
Speedster-WISD Nats 05 14.4s @ 89 MPH
Jet cruiser-Coogee 22-09-05 900 deg C @ 110,000 rpm
Weaseling out of things is what separates us from the animals....................Except the Weasel.
|
|
|
