Board Logo
Go To Bottom

Printable Version  
[ Total Views: 2802 | Total Replies: 44 | Thread Id: 22309 ]
 Pages:  1  2
Author: Subject: Air locker for Vw
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on April 30th, 2004 at 12:08 AM
Air locker for Vw


I am working on a air locker for the vw kombi diff but before I go any further ,I would be interested to know if any one knows of a diff lock that is off the shelf already ?? so far I can not find one any were ?

I am not sure on the ( if there is a strong market for these ) but will build mine any way .




Looking for that special lady : PM me for coffee & cake
Membermodulus
A.k.a.: Peter Hill
Veteran Volks Folk
*****


Avatar


Posts: 2009
Threads: 76
Registered: July 1st, 2003
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro White
Mood: modular

posted on April 30th, 2004 at 12:29 AM


Have a look at this thread....

http://www.aussieveedubbers.com/forum/viewthread.php?tid=1714#pid127911 

hth




Peter Hill
1975 Type 2 Double Cab
modulus.com.au
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on April 30th, 2004 at 12:50 AM


mmm thanks modulus , I knew I seen this some were ?

I have just stripped my mates holden HSV diff down HYDRATRAK thing , mmm what a heap of SHIT this car is thye rear end has fallen out 4 times any way ,the hyra thing a like a detrot locker no more , after I got it out ,and he left to get lunch .I decided to cut it open in the lathe , got a cuter $70.00 ground it to a V turned all the power off in the house ,max amps ,and started to cut it open ,I found that when they wear there is no were for the filings to go bearing bronze ( sealed from diff oil ) it has a hi temp grease that is packed in and sealed off .
I then looked at the kombi diff .I think I can fit this to the center a bit of machining a adapter ( spline ) a few mods and it will fit .

But there about $1300.00 so thats out .
The option your ref to is better .
look for the HSv with out a hydratrak at the car yard ! holden drive on !




Looking for that special lady : PM me for coffee & cake
Memberdaz67
A.k.a.: Darryl Hall
Wolfsburg Wizard
Qld Manx
***


Avatar


Posts: 627
Threads: 25
Registered: August 25th, 2002
Member Is Offline

Location: Springwood--Brisbane--Qld
Theme: UltimaBB Pro Blue ( Default )

posted on May 1st, 2004 at 09:51 AM


This has possibly been thought of or even talked about before, but how close is a Subaru diff to a VW???

Is there a Air Locker for Subaru available(That could be modified)?




MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on May 1st, 2004 at 10:30 AM


seagull, you make..........me buy !



Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 1st, 2004 at 09:48 PM


I started it to day patent pending ! graig , O did you get the photos I sent you ?? seagull



Looking for that special lady : PM me for coffee & cake
MemberAndy42
Insano Dub Head
****


No Avatar


Posts: 709
Threads: 47
Registered: March 13th, 2003
Member Is Offline

Location: Airlie Beach
Theme: UltimaBB Pro Blue ( Default )
Mood: 2.5t Subi Powered

posted on May 2nd, 2004 at 07:51 AM


I am with craig you make I BUY:thumb:thumb



.
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on May 2nd, 2004 at 08:07 PM


got the photos,thanks...........................now start working on the diff !!!!!!!:thumb

P.S. I'm using a 1800 Kombi box. :kiss




Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 2nd, 2004 at 09:38 PM


man the pressure to get these is on ,now to find some HSV up side down in the bush !



Looking for that special lady : PM me for coffee & cake
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on May 3rd, 2004 at 09:48 AM


that can be arranged!:P.................................tell me what you need.



Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 3rd, 2004 at 12:10 PM


There easy to um borrow just ask the kids at the loly shop !



Looking for that special lady : PM me for coffee & cake
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on May 3rd, 2004 at 01:27 PM


what about a normal Holden LSD???



MemberBrad
Wolfsburg Elder
*******


No Avatar


Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline

Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building

posted on May 3rd, 2004 at 04:43 PM


I'm with these guys, I am using a 091 box though and would like to use the 4 spider diff from the later transporter.

But you make and I too will buy if teh price is right :>




Brad
Why copy when you can own an original ?
Meyers Manx Australia
Memberdaz67
A.k.a.: Darryl Hall
Wolfsburg Wizard
Qld Manx
***


Avatar


Posts: 627
Threads: 25
Registered: August 25th, 2002
Member Is Offline

Location: Springwood--Brisbane--Qld
Theme: UltimaBB Pro Blue ( Default )

posted on May 3rd, 2004 at 04:59 PM


Me Too.

You make and I too will buy if the price is right :>




MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on May 3rd, 2004 at 09:47 PM


Sounds like a group buy seagull !!!!



MemberVWCOOL
23 Windows of Awesome
********


No Avatar


Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline

Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help

posted on May 3rd, 2004 at 10:41 PM


I'll be in on that, too. BUT take a look at the Lock-Rite (mayby lock-right) diff. They do a centre for the BTR diff (Falcon, Commodore etc). I'm sure they have a diff for the Kombi box. Not sure about Beetle



Pay your debts, CxxT
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 3rd, 2004 at 11:49 PM


craig , I have not seen the holden LSD ,the locker hydratrak is a mini spool small .I need to get hold of the following 2ltr kombi box , 1800 kombi box pdf format of the crown wheel and pion then run the holden pdf over that , with some help mabe here this may pay off .I would say if it works it would be a very good set up ,the hydra can be split opened and the shims replaced ,then rewelded ( dont tell the holden boys ) so need to get them first before they go in the bin .a air locker may be the go as well ,

but re this , my mate has a nissan 720 twin cab 4x4, nissan v6 he has fitted a air locker to the rear he was showing off smoking the rear big bags when he seen only one wheel was smoking he hit the switch ( air pump ) BANG the diff blew up . not smart .the other point when going hard ( oil temp ) is up they leak air pass the o ring seals you see hear the leak from the oil breather tube and when the car is in a standing position the pump runs ( no leaks from air lines )




Looking for that special lady : PM me for coffee & cake
MemberBrad
Wolfsburg Elder
*******


No Avatar


Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline

Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building

posted on May 4th, 2004 at 08:52 AM


if it isn't going to be a command locker of some type there is no point as an auto locker and spool is already on teh market, as is an LSD.



Brad
Why copy when you can own an original ?
Meyers Manx Australia
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 4th, 2004 at 11:34 AM


yep ,but the cost ! is_____



Looking for that special lady : PM me for coffee & cake
MemberBrad
Wolfsburg Elder
*******


No Avatar


Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline

Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building

posted on May 4th, 2004 at 04:13 PM


Ok I will reword for ya .. :)

I am only interested in a Command Locker as I like steering my buggy when I drive it. So if it is going to be a auto locker, spook, LSD etc etc then I am not interested.




Brad
Why copy when you can own an original ?
Meyers Manx Australia
MemberMikeM
Custom Title Time!
Buggy Head
*****


Avatar


Posts: 1429
Threads: 71
Registered: August 7th, 2003
Member Is Offline

Location: Brisbane North Side
Theme: UltimaBB Pro Blue ( Default )
Mood: :duh

posted on May 4th, 2004 at 04:35 PM


Quote:
Originally posted by Buggy Brad
I am only interested in a Command Locker as I like steering my buggy when I drive it. So if it is going to be a auto locker, spook, LSD etc etc then I am not interested.


Yeah I think in a Buggy the diff of choice is a command locker.

I think Vacuum Hypoid style Diff-Lock would be the best style as that way you don't need an air compressor.

http://www.mcnamaradiffs.com.au/hypoid1.html 

[Edited on 4-5-2004 by MikeM]




MemberDesert Moose
A.k.a.: Chris Hill
Veteran Volks Folk
Cut Cut Cut
*****


Avatar


Posts: 2098
Threads: 175
Registered: March 4th, 2004
Member Is Offline

Location: Perth W.A.
Theme: UltimaBB Pro Black
Mood: I don't know if I'm indecisive

posted on May 4th, 2004 at 05:02 PM


Quote:
Originally posted by seagull
I am working on a air locker for the vw kombi diff but before I go any further ,I would be interested to know if any one knows of a diff lock that is off the shelf already ?? so far I can not find one any were ?

I am not sure on the ( if there is a strong market for these ) but will build mine any way .


Seagull
Talk to "Country" Rod Hatters old navigater they put a ford 9" into a 2lt kombi box ( it could take 300hp).




http://img.photobucket.com/albums/v252/Moose906/Sign.jpg
MemberBaja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
******


Avatar


Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content

posted on May 4th, 2004 at 05:13 PM


Quote:
Originally posted by MikeM
I think Vacuum Hypoid style Diff-Lock would be the best style as that way you don't need an air compressor.

http://www.mcnamaradiffs.com.au/hypoid1.html 


Interesting. I notice on their site it says (about the vacuum locking carrier)

"The Vacuum Operated 4 Pinion Gear Locking Differential Carrier (pictured), can be manufactured to fit most conventional automotive Differentials"

and

"If you are interested in this Differential Lock Design for your vehicle - please contact us. "

I think someone should contact these people. They obviously have the CAD drawings of the carrier, if we could get the drawings, then draw a 6-rib diff, then we'd be able to figure out if it could work. They might even already know.




Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... :)
www.taylorcycles.com.au - My DH MTB racing brothers shop.
MemberBrad
Wolfsburg Elder
*******


No Avatar


Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline

Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building

posted on May 4th, 2004 at 05:33 PM


email sent :)



Brad
Why copy when you can own an original ?
Meyers Manx Australia
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 4th, 2004 at 06:42 PM


my relation ! runs these in his sand dune hill climer SWB jeep runing a super charged 351 v8 . I think this is what they call quadratrak ? not 100% sure .I do know it is vacuum operated

Chris the diff is totaly stuft after a race ! it wares the diff out I know a lot about this box and it good and bad points .the man is a legend amasing its made from a scrap plate and some old steel bar a old renault some old holden bits
.I had a look at the clutch after max raced it last .man it was just holding on ,fast car and big $ .
I worked it out a few weeks back for every 3 kmters you need to throw $100.00 out the window ,thats what max does .




Looking for that special lady : PM me for coffee & cake
Memberpete wood
A.k.a.: figure itout
23 Windows of Awesome
********


Avatar


Posts: 6828
Threads: 389
Registered: January 15th, 2004
Member Is Offline

Location: Nth Nth StMarys, Sydney
Theme: UltimaBB Pro White
Mood: upgrades = jackstands

smile.gif posted on May 6th, 2004 at 11:22 PM
Vacuum lock diffs


The idea looks great. I'd be interested in knowing if he can do one and what it would cost.
What do you reckon it would be like for the odd night at the drags?




"stoopid is stronger than axles"
http://drivingnotpolishing.blogspot.com.au/ 
MemberBaja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
******


Avatar


Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content

posted on May 7th, 2004 at 08:36 AM


I reckon you don't need a locker for the drags in an offroad vw. I really really doubt you'll get any real wheelspin anyway.



Wes - www.offroadvw.net - 200HP Quad Cam V6 in a VW Baja - with climate control... :)
www.taylorcycles.com.au - My DH MTB racing brothers shop.
Member11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
*******


Avatar


Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline

Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n

posted on May 7th, 2004 at 10:31 PM


Has anyone looked into the syncro vaccuum operated diff locks?



65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
Memberseagull
Compulsive Aussie Vee Dubber
*******


No Avatar


Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline

Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )

posted on May 8th, 2004 at 12:52 AM


I looked a vacuum locker to day and its in my shed ! there is spool with a fork that pulls the dog gears in .It has never been used as the guy did not know what it was for ? now to get it in the diff center



Looking for that special lady : PM me for coffee & cake
Memberdubcab
Seriously Crusin Dubber
**


Avatar


Posts: 175
Threads: 25
Registered: September 4th, 2002
Member Is Offline

Location: 30kms east Toowoomba
Theme: UltimaBB Pro Blue ( Default )
Mood: T2 tdi...100mph&40mpg?

posted on May 12th, 2004 at 08:39 PM
lock and load


If any one can make a switchable diff-lock I'd certainly be interested. I was talking to a guy a year ago in toowoomba at the klub vw show,I think his name was rudy, he was driving a syncro with twin diff locks. He told me you can fit a l.s.d. or switchable lock to earlier kombi's but.....the cost $2500 and $4000 respectively. For something your going to use about 5% of the time its a bit exy. $1200 buys a bloody good electric winch. So without sounding like a tightarse an affordable diff lock option is what I'm after.
 Pages:  1  2


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 16.8% - SQL: 83.2% ]