| [ Total Views: 4638 | Total Replies: 128 | Thread Id: 40881 ] |
| Pages: 1 2 3 .. 5 |
|
|
 seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
 posted on June 23rd, 2005 at 01:51 AM |
|
|
ej 20 computer problems Help please * braking news guys *
First problem
No dash light ecu check light . ??
Second problem .
I have power at the fuel relay but the ecu will not start the pump .Have checked the pump it works fine/ changed relay /wires are correct , just
nothing switching it on ??
ideas please , cheers seagullnn[ Edited on 17-7-2005 by seagull ]
Looking for that special lady : PM me for coffee & cake
|
|
|
subaruboxer
Officially Full-On Dubber
Posts: 292
Threads: 20
Registered: January 1st, 2005
Member Is Offline
Location: North Germany
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 05:44 AM |
|
|
Hi seagull,
sounds to me like you have a ground problem. The check engine light is connected to ignition plus and ground from the ecu only. If you got plus from
the ignition, you have no ground. Check your ground to the ecu.
ecu to check engine light is b 19 (that is the ground connection of the light)
The fuel pump relay is connected
ignition plus
d 12 and b 23 to the ecu
and to ground
Maybe I am wrong,
hope you find it. Okay ground is American English for you that is earth!!! Sorry I am more into American English.
[Edited on 23-6-2005 by subaruboxer]
|
|
|
boof2332
Custom Title Time!
Posts: 1210
Threads: 120
Registered: May 10th, 2004
Member Is Offline
Location: Beecroft Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Sympathetic
|
| posted on June 23rd, 2005 at 07:20 AM |
|
|
I concurr.. sounds like a earth....
|
|
|
Brad
Wolfsburg Elder
Posts: 3764
Threads: 332
Registered: August 24th, 2002
Member Is Offline
Location: SE QLD, Mt Nebo
Theme: UltimaBB Pro Blue ( Default )
Mood: Manx Buggy Building
|
| posted on June 23rd, 2005 at 10:04 AM |
|
|
make sure you have earthed your engine block well. I had a few early on who really wanted a good earth not provided by the VW setup. Just ran one from
the inlet manifold to the body.
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 07:52 PM |
|
|
Cheers guys I will check the above
Looking for that special lady : PM me for coffee & cake
|
|
|
boof2332
Custom Title Time!
Posts: 1210
Threads: 120
Registered: May 10th, 2004
Member Is Offline
Location: Beecroft Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Sympathetic
|
| posted on June 23rd, 2005 at 08:04 PM |
|
|
One thing around the wrong way will also feed back into the computer causing problems that dont seem to make sense.
Again that is an earth issue. There are alot of earths for these motors..
Matt
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 10:20 PM |
|
|
Ok ran anther earth from motor to battery
ok eng light still does not work , has power now still no light , globe ok .
is there some thing missing to triger the relay ( shown here )
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Looking for that special lady : PM me for coffee & cake
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on June 23rd, 2005 at 10:21 PM |
|
|
Did u do "Ctrl Alt delete" yet? lol.
Sounds like a terrible problem mate, but im sure u will get through it okay. GOodluck
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 10:22 PM |
|
|
wires are
red ( i have power )
black / red > to fuel pump
purple with silver dot > to ecu
Cheers :beer
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 10:23 PM |
|
|
I need the force :vader
Looking for that special lady : PM me for coffee & cake
|
|
|
boof2332
Custom Title Time!
Posts: 1210
Threads: 120
Registered: May 10th, 2004
Member Is Offline
Location: Beecroft Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Sympathetic
|
| posted on June 23rd, 2005 at 10:42 PM |
|
|
Does there need to be an earth there....arnt the fuel pumps earth triggered ....its not microtech..shame! I am a friggen expert there!
Matt
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 23rd, 2005 at 10:49 PM |
|
|
Its shitting me the same Matt , I tell you I am going to hit it ( !!!!!! )
ARRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
tryed an earth no go , its some thing silly I would say
Looking for that special lady : PM me for coffee & cake
|
|
|
subaruboxer
Officially Full-On Dubber
Posts: 292
Threads: 20
Registered: January 1st, 2005
Member Is Offline
Location: North Germany
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 24th, 2005 at 05:09 AM |
|
|
| Quote: | Originally
posted by seagull
wires are
red ( i have power )
black / red > to fuel pump
purple with silver dot > to ecu
Cheers :beer
|
Your wire colours are different than mine, that might be because the european version is different, but mine has 4 wires. I think you got to check
that. What year is your engine?
[Edited on 23-6-2005 by subaruboxer]
|
|
|
subaruboxer
Officially Full-On Dubber
Posts: 292
Threads: 20
Registered: January 1st, 2005
Member Is Offline
Location: North Germany
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 24th, 2005 at 05:49 AM |
|
|
Seagull,
your fuel pump relay is missing one plus (+) wire, it got to have ignition+ and permanent+ . If that is said wrong again,
it does not matter. I hope you understand what I am talking about. You need a wiring diagram!
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 24th, 2005 at 09:33 AM |
|
|
cheers Mate , I had the wiring done in the over east as I could not find a diagram for a 96 ej20 N/A motor , the ecu has three plugs .
thanks again for the above I give that a go tonight .
Looking for that special lady : PM me for coffee & cake
|
|
|
jvl054
Wolfsburg Wizard
Posts: 403
Threads: 11
Registered: May 28th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: pure tubular adrenalin subiepower
|
| posted on June 24th, 2005 at 01:53 PM |
|
|
Hey seagull,Check relays.Deffently does not sound like a earth problem.IF you have power check pumps are working. Also check ignition switch.After all
this checking,if you have more than one relay swap them around and see what happens.JVLRacing
|
|
|
ratbug
A.k.a.: Andrew Todd
Wolfsburg Wizard
aka toddy101
Posts: 439
Threads: 30
Registered: January 14th, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2005 at 09:14 PM |
|
|
Hmm looks like all my posts have been lost..
Ohh well, my last post was that I found a scan i did a little while back of the EJ20 ECU connections from the liberty book. its located at http://users.hunterlink.net.au/~ddat/conversion/Ej20.gif
Andrew.
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2005 at 09:17 PM |
|
|
Yes Andrew I had a reply to the post you made .
I found if I ran power to the green wire on the brown relay the motor started and then stoped , just a fire
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2005 at 09:24 PM |
|
|
I did a check on the earths they are working , just no latching of the relays .
Col if your can I would gladly buy you a beer to have a look at this please .
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2005 at 10:22 PM |
|
|
I had the motor light up 3 flashes then 9 fast flashes , I need to find out what these are telling me
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 12:10 AM |
|
|
this is the side that the lid comes off the ecu
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 12:11 AM |
|
|
shot of the other plugs at rear
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 12:22 AM |
|
|
top of ecu
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Looking for that special lady : PM me for coffee & cake
|
|
|
Kombicol
Officially Full-On Dubber
Posts: 211
Threads: 18
Registered: September 14th, 2003
Member Is Offline
Location: Perth WA - sand it's everywhere!!
Theme: UltimaBB Pro Blue ( Default )
Mood: subariffic
|
| posted on June 29th, 2005 at 05:56 PM |
|
|
I also made a post on this yesterday, aw well, here i go again.
The fact you got a fire by putting a hot wire on the relay suggests the ignition wiring is not hooked up correctly.
go to the relay pack, and follow the light green wire back to the diode, it will be a small black plastic thing taped up in the loom, kinda like a
connector. it will have a yellow wire in and a green wire out.
hook your hot wire up the the yellow wire, and tell us the results.
Col
btw
There is no code 31 in the manuals I have, so this could be a JDM or later model specific code.
|
|
|
ratbug
A.k.a.: Andrew Todd
Wolfsburg Wizard
aka toddy101
Posts: 439
Threads: 30
Registered: January 14th, 2003
Member Is Offline
Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 06:49 PM |
|
|
Code 31 is the throttle position sensor (open or short circuited)
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 07:48 PM |
|
|
ok , I am back to the shed to find the above
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 08:41 PM |
|
|
Col , I have followed the green wire from the brown relay >there is no plug or diode on the green wire is goes straight to the ecu ( shown as number 9
) on the fist photo of the ecu .I can not see a cut in the wire .
I must say I am lost :beer
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 29th, 2005 at 08:51 PM |
|
|
hey guys , what if the ecu had a remote type key start from factory ? would this stoping it or would the removal of the starter and mods to the wires
get around this .
Looking for that special lady : PM me for coffee & cake
|
|
|
seagull
Compulsive Aussie Vee Dubber
Posts: 4979
Threads: 752
Registered: December 25th, 2003
Member Is Offline
Location: PerthWA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 30th, 2005 at 02:00 AM |
|
|
is there any way of finding out what the ecu is by the numbers marked on top as per my photo ? ( import front cut )
if the auto ecu is removed can the motor ecu still be started ? ie may be the motor ecu thinks it in drive and will not start
I must be fighting the VW god in my shed some how telling me not to go to the dark side :vader
Looking for that special lady : PM me for coffee & cake
|
|
|
Kombicol
Officially Full-On Dubber
Posts: 211
Threads: 18
Registered: September 14th, 2003
Member Is Offline
Location: Perth WA - sand it's everywhere!!
Theme: UltimaBB Pro Blue ( Default )
Mood: subariffic
|
| posted on June 30th, 2005 at 02:30 PM |
|
|
Hmm guess the late model import jobs are done differently
This doesn't help you any, but this one of the main reasons I pulled out my EJ20 and replaced it with and EJ22. They are far easier to get parts and
bits and pieces, knowledge and acurate diagrams are easily available.
you know there was an EJ22 with loom and ecu in the quokka couple of weeks back for 1200..., could still be available.
and all your adaptor exhaust etc will fit + more torque..
Col
|
|
|
| Pages: 1 2 3 .. 5 |
