| [ Total Views: 4232 | Total Replies: 20 | Thread Id: 56811 ] |
|
|
 mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off 
|
| posted on September 26th, 2006 at 01:58 PM |
|
|
181 Spindles and balljoints
I was wanting to know who can supply 181 balljoints. I have just got myself a set of spindles and trailing arm but I need to replace the balljoints.
Also I have trial fitted a brake disc ('72 SBUG) to one of the spindles and am having a clearance problem with the seal on the back of the hub, The
disc fits fine but when I install the seal it binds up. Do I just need to fit a seal without a shoulder or is it the disc I'm using, I could trim it
back a little on a lathe.
Photo shows one of the reasons I have to replace the balljoints and why you need to line them up properly when you fit them.Don't think it would have
done much for suspension travel.
[ Edited on 26-9-2006 by mackaymanx ]
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
 |
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on September 26th, 2006 at 07:13 PM |
|
|
:bounce anyone, I'm just trying to shorten down the list of people to ring.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on September 26th, 2006 at 07:16 PM |
|
|
I bought mine from ISP WEST VW PARTS & RESTORATIONS INC. in the US. Website is WWW.VWISPWEST.COM
Part No:
Upper= 181405361A, $21.25 US each
Lower= 181405371C, $21.25 US each.
Shipping $44.50 US
Cheers
Craig T
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on September 26th, 2006 at 07:22 PM |
|
|
thanks, did you have any clearance problems with the seal?
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on September 26th, 2006 at 07:27 PM |
|
|
No, it fits fine.
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on September 26th, 2006 at 07:30 PM |
|
|
Ok, I'll have to investigate that further. Prices have gone up, $45 US now
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on September 27th, 2006 at 05:07 PM |
|
|
Got some from from COR for $58 each, here by friday and no hassle and wait with an OS order.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on September 27th, 2006 at 07:52 PM |
|
|
Wow they have them in Stock...............that's good to know.
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 1st, 2006 at 03:54 PM |
|
|
I've put some comparison shots up for those interested, LH BJ and RH 181
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 2nd, 2006 at 11:15 AM |
|
|
Pics of standard ball joints
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 3rd, 2006 at 04:41 PM |
|
|
Had to machine the camber adjusters to accept the larger taper that 181 balljoints have( machined one is on the left). PO was using standard beetle
upper balljoints.These adjusters are a bit ratty(came off a spare beam I had). I will probably replace these later, Just wanted to see how hard they
were to machine.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 5th, 2006 at 06:56 PM |
|
|
Started on some caliper brackets today. Pic show progress so far.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
MickH
A.k.a.: Michael Hutchinson
Bishop of Volkswagenism
Hairy Gutted Sloth
Posts: 3389
Threads: 29
Registered: September 6th, 2003
Member Is Offline
Location: TownsvilleTropical North QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Grow a brain...walls don't hit back...
|
| posted on October 5th, 2006 at 07:59 PM |
|
|
Looking good...:thumb
tssnq.com.au
|
|
|
MikeM
Custom Title Time!
Buggy Head
Posts: 1429
Threads: 71
Registered: August 7th, 2003
Member Is Offline
Location: Brisbane North Side
Theme: UltimaBB Pro Blue ( Default )
Mood: :duh
|
| posted on October 5th, 2006 at 10:22 PM |
|
|
mackaymanx I'm guessing you work for / own a machine shop. Some good work there.
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 5th, 2006 at 10:33 PM |
|
|
I got the blanks cut, all I have is a little lathe. It's slow, I can only take small cuts but it does the job.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
64vwmark
A.k.a.: Mark Shepherd
Fahrvergnugen
Posts: 930
Threads: 82
Registered: December 6th, 2004
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Black
|
| posted on October 6th, 2006 at 12:05 AM |
|
|
Nice work:thumb:thumb:thumb
Beach Buggy
74 L Beetle
Mk4 Golf |
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 7th, 2006 at 04:45 PM |
|
|
Here is one assembled with the dust cover installed. Will use socket head cap screws to bolt the brackets on later.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 10th, 2006 at 02:24 PM |
|
|
I have some comparison shots of the lower trailing arm, I haven't shown the upper trailing arm because I don't believe I have the proper upper
trailing arm and even the thing specialist in the US swap them anyway.
First shot shows RH BJ and LH 181 trailing arms
This shows the difference in tube thickness of the arms, it should be note that the upper BJ arm thickness is the same as the lower 181 arm
Here is the standard BJ arm, modified BJ arm and 181 arm.I found that by removing the excess metal on the BJ arm you can fit the 181 ball joint( the
181 ball joint has a larger diameter mounting flange).
The shock absorber stud is longer, has a larger thread and is machined back closer to the ball joint, but the centreline of the shock absorber remains
the same as the standard BJ arm. Extra lugs around the balljoint would just make removal easier.
I can see no difference in the geometry of the trailing arms to prevent you from using modified standard BJ trailing arms with 181 spindles.
[ Edited on 10-10-2006 by mackaymanx ]
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 16th, 2006 at 09:05 PM |
|
|
.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
MikeM
Custom Title Time!
Buggy Head
Posts: 1429
Threads: 71
Registered: August 7th, 2003
Member Is Offline
Location: Brisbane North Side
Theme: UltimaBB Pro Blue ( Default )
Mood: :duh
|
| posted on October 16th, 2006 at 09:19 PM |
|
|
Custom Offroad have got them on the shelf. 
http://www.customoffroad.com.au/vw/partFull.asp?partid=184
|
|
|
mackaymanx
A.k.a.: Brent
Custom Title Time!
Posts: 1611
Threads: 97
Registered: January 12th, 2006
Member Is Offline
Location: Mackay.QLD
Theme: UltimaBB Pro Blue
Mood: Brad'ed Off
|
| posted on October 16th, 2006 at 09:25 PM |
|
|
True, but mine cost me less than half what they are asking. I posted the drawing for somebody on thesamba because I couldn't post it there.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."
|
|
|
