| [ Total Views: 10432 | Total Replies: 44 | Thread Id: 86630 ] |
| Pages: 1 2 |
|
|
 smithy68
Wolfsburg Wizard
Posts: 419
Threads: 145
Registered: October 10th, 2010
Member Is Offline
Location: Adelaide S.A
Theme: UltimaBB Pro Blue
|
| posted on October 18th, 2010 at 02:59 PM |
|
|
Best Engine oil and Gearbox oil to use?
Hi wondering what the best engine and gearbox oil was to use in a standard 67 beetle.
Castrol GTX 2 for the engine?
and 80w 90 hypoid gearbox oil castrol too?
Thanks.
Also would you recommend a bosh plug or are the denso/ngk plugs better?
|
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2010 at 05:39 PM |
|
|
The best engine oil to use is clean oil, as frequently as possible. Due to the lack of oil filter, the 3000 mile (5000km) oil change interval is very
important. I've previously used Penrite, Castrol GTX2 and various other stuff and haven't noticed any problems. Short of doing a scientific study
over a couple of hundred thousand km it's pretty difficult to tell the difference. Some people recommend straight 30 weight oil rather than
multigrades, a lot of people are full of praise for the special ACE oils but I don't think it's likely that special expensive oil will be worth the
money. The oil is changed so frequently in VW engines that it doesn't really need to be anything super-special in my opinion, it's not like you're
doing 20,000km oil changes or anythiing like that.
Gearbox oil is a question which I'm contemplating myself at the moment as I'm going to be doing a gearbox oil change soon. The manuals specify
Castrol Hypoy LS I believe, which is still available and described thus:
Castrol Hypoy LS
Mineral based, SAE 90 extreme pressure gear oil designed to cope with the special friction characteristics of limited slip differentials fitted to
road going cars
I've also heard of a specific transaxle oil which some recommend, but can't remember the name of it at the moment.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on October 18th, 2010 at 05:47 PM |
|
|
only ACE oil for dubs. 
all other oils broke down on me just after a few 100ks Especially castrol 
They are obviously designed for liquid cooled engines.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
 helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on October 18th, 2010 at 05:57 PM |
|
|
I use Penrite HPR30. I buy it in 20 litre drum, and it suits two of my vehicles. I change at 3000miles for the Beetle. 2.5 litres
The recommended trans oil is Penrite Gear oil 80
|
|
|
smithy68
Wolfsburg Wizard
Posts: 419
Threads: 145
Registered: October 10th, 2010
Member Is Offline
Location: Adelaide S.A
Theme: UltimaBB Pro Blue
|
| posted on October 18th, 2010 at 06:25 PM |
|
|
Where do you by ACE oil I have never heard of it?
|
|
|
h
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
Posts: 7671
Threads: 375
Registered: February 3rd, 2005
Member Is Offline
Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me
|
| posted on October 18th, 2010 at 06:28 PM |
|
|
matt berry supplies ace
he's on here so drop him a line he'll help ya out
cheers h
|
|
|
helbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline
Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair
|
| posted on October 18th, 2010 at 06:32 PM |
|
|
Google search
ACE oil au
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on October 18th, 2010 at 09:43 PM |
|
|
made by QPL in Backus mash.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on October 18th, 2010 at 10:09 PM |
|
|
Air Cooled Engine Oil, designed specifically for our air cooled engines.
For the trans, any Hypoid 80W-90 will do the trick, although there is one made by ACE too.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 18th, 2010 at 10:20 PM |
|
|
| Quote: | Originally
posted by matberry
Air Cooled Engine Oil, designed specifically for our air cooled engines.
|
This kind of reminds me of how HKS made special engine oils for individual engines and cars, such as Nissan RB-series oil, Toyota 1JZ/2JZ oil,
Mitsubishi 4G63 oil and so forth.
Mitsubishi Evo X oil
4G63 oil, which is presumably the same as Evo X oil? This oil goes for roughly $160 per 4 litre tin.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on October 19th, 2010 at 01:26 AM |
|
|
| Quote: | Originally
posted by smithy68
Hi wondering what the best engine and gearbox oil was to use in a standard 67 beetle.
Castrol GTX 2 for the engine?
and 80w 90 hypoid gearbox oil castrol too?
Thanks.
Also would you recommend a bosch plug or are the denso/ngk plugs better?
|
[B]
Hi
I've always used Castrol GTX2 in My beetle engine...
and 80w90 hypoid oil in My transaxle
with a MOLY additive . MOLYBOND - PROMAR etc..
but with this gearbox I filled with EXPENSIVE Castrol Syntax synthetic oil... I don't recommend it as it leaks thru the stud threads etc... not bad
leaks , no drips, but always wet with oil... where I never had any problems with normal Hypoid oil.
I use German made BOSCH spark plugs or BERU..
Nippon denso or NGK plugs should be OK too..
I also recommend replacing the points with Pertronix ignition kit...
cheers
Lee
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on October 19th, 2010 at 08:53 AM |
|
|
A little common sense is all takes when picking oil ie. don't feed it that homebrand woolies crap but you have to go OTT buying exotic whale oil
extracted from albino gorrilla urine either.
ACE is the ducksnuts in oil for vw engines, and if you had a nice built up vw engine I'd use it too, but for a stocko with XXXX miles under its belt
may be a bit over kill
My old 1600 from my first bug hasnt been split since I built it over 12 years ago, Ive fed 10psi boost into it and flogged the crap outta that thing
all the time only running Castrol GTX in it changed every 3000 miles and it still has perfect oil pressure after 60k
Conversely, a friend ran shell helix in a rebuilt engine and after only 40k the oil light used to flicker at idle
I'm interested in thoughts on tranny oil though, after 9 years I think i need to change mine
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on October 19th, 2010 at 10:19 AM |
|
|
We live in the present not the past, a mono grade oil might be alright in 1960's but as the demands are made for the engine's to perform better use
a better oil, i have used a good quality multi grade of oil for year's and have had no issues, as for the gearbox i run a redline pure synthetic that
is not hydroscopic and has a much greater ability to resist gear tooth contact pressure, all this adds up to a more reliablity on the mechanical side.
Oil's have delevoped incredibly over the year's and are suitable to use in our cars, you can phone any of the oil companies and speak to any of
there engineer's to find out what is suitable for your aplication.
|
|
|
fish26
A.k.a.: benito
Fahrvergnugen
Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome
|
| posted on October 20th, 2010 at 10:09 PM |
|
|
Brad Penn 20w50 racing
Royal Purple 20w50 racing
Both excellent oils and long time proven
Our air cooled engines need anti wear additives and high concentrations of Zinc and Phosphorus combined to form ZDDP, not additives that prolong oil
change intervals.
These two oils use roughly 0.12% - 0.15% Zn & P, it would be interesting to find out about the make up of ACE motor oils as it is a local product.
bitten by the bug..........several times
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on October 21st, 2010 at 08:54 AM |
|
|
iI don't even use a mono grade in my brig's and stratton mower.
|
|
|
BRUTUS
A.k.a.: et tu, Brute
Officially Full-On Dubber
Posts: 255
Threads: 17
Registered: February 8th, 2006
Member Is Offline
Location: Brutus has retyred
Theme: UltimaBB Pro Grey
Mood: ACE 30 FOR SALE!
|
| posted on October 21st, 2010 at 09:45 AM |
|
|
QPL's website may be hard to find. (I think there's a new one?) Yes they are in Bacchus Marsh.
Anyway their old one is:
http://www.qplubes.com/index.html
The Volks Enthusiasts Club may be the only current distributor of ACE oil for Adelaide (contact: Barry L or Jon K).
The level of Zn in ACE 30 & 40 (& 20) is 0.11%. (There is an "optimum" level for Zn & P, ie. too much of anything can degrade other
properties.)
ACE 30 & 40 oils: specifically engineered for your Air Cooled VW
delivered (free del.) throughout Yarra Valley / Ranges, & Gippsland areas. Also ACE 20, 50 & 90.
FOR SALE: ACE 30, 40 etc. Oil formulations & Trade-names.
|
|
|
fish26
A.k.a.: benito
Fahrvergnugen
Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome
|
| posted on October 21st, 2010 at 05:00 PM |
|
|
seems they have done their research on what's required to run in aircooled engines, min 0.11% Zn content.
bitten by the bug..........several times
|
|
|
kaiisons
Seriously Crusin Dubber
Posts: 119
Threads: 11
Registered: March 1st, 2009
Member Is Offline
Location: St Clair, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Dubbin
|
| posted on December 28th, 2013 at 04:07 PM |
|
|
Anyone have any updates on where I can purchase this oil in NSW or Sydney or do I have to get it freighted? Also whats are the rough costs, may be
better to order a few bottles as save on multiple freights
|
|
|
kaiisons
Seriously Crusin Dubber
Posts: 119
Threads: 11
Registered: March 1st, 2009
Member Is Offline
Location: St Clair, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Dubbin
|
| posted on December 29th, 2013 at 04:18 PM |
|
|
I have been using HPR15 too thin?
|
|
|
DakDak67
Officially Full-On Dubber
Posts: 208
Threads: 15
Registered: September 12th, 2011
Member Is Offline
Theme: XMBX Pro Green
|
| posted on December 29th, 2013 at 04:54 PM |
|
|
| Quote: | Originally
posted by kaiisons
I have been using HPR15 too thin?
|
no problem at all , personally i use HPR 15 in winter and HPR30 in the hotter months. I did the same when i was using ACE , 30 in
Winter and 40 in summer. Keeps my 2276 happy.
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on December 29th, 2013 at 07:16 PM |
|
|
Hi
I only use Nulon and whatever they recommend for the cars in my family
03 STI bug
1904 cc bug
02 Prado 3.4litre
RB30+T Skyline
LS400 Lexus
Never had an issue.
Actually a true story, we bought low k R31 Nissan Pinatra a few years ago, changed the filters and all fluids with Nulon when we got it, after a few
months the oil light was coming on (son told me checked the oil level) so I decided to change the oil and filter again thinking a bit of crud might be
in the engine as it hadn't been driven very much by the po.
When I dropped the oil what came out hardly covered the oil drain container, so about 500ml, so I checked the dipstick, it still read 1/2 full, then I
had a better look, the rubber stop on the dipstick had slipped up giving a false reading
So this motor was run without hardly any oil and survived.
Steve
|
|
|
fish26
A.k.a.: benito
Fahrvergnugen
Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline
Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome
|
| posted on December 29th, 2013 at 07:58 PM |
|
|
I like Nulon oils............interesting story BTW
bitten by the bug..........several times
|
|
|
modnrod
Fahrvergnugen
Posts: 978
Threads: 50
Registered: March 17th, 2011
Member Is Offline
Location: Midwest, Westoz.
Theme: UltimaBB Pro Blue
Mood: Old School Volksies!
|
| posted on December 30th, 2013 at 11:04 AM |
|
|
I always used to use Pennzoil SAE30 and SAE50. They always worked brilliantly, the SAE50 sounds like thick goop, but when you're running a tweaked
ACVW in mid-40s all day on the highway I found the film thickness ended up doing the job well, the SAE30 didn't give the oil pressure I needed.
I also went to Redline 20W40, that stuff is just amazing, really really trick, but hideously expensive and difficult to find, so back to Pennzoil dino
I went. I don't even know if Pennzoil is available any more though, so was interested in what worked and was readily available now.
Oh yeah, and although new modern oils are just the ducks guts for protection of components, running slippery stuff 0W20 in an older single-relief case
that has stock OEM clearances in it is just asking to have to paint over the oil warning light just to get down to the shops. In a single-relief case
the oil cooling and oil pressure is reliant on a SAE oil getting thinner as it gets hotter, so new wonderful thin synthetics will normally cause
issues..........but since it falls out of every damn weeping porous VW casting it can find, it might not be in there long enough to matter much! 
Save that stuff to use in the just-rebuilt engine using components and clearances that are put together to use it effectively.
Can anyone recommend an off the shelf oil for a new motor with good clearances that dissipates an air-cooled engines heat better or as well as Motul
300V 15W40? I can get that stuff easily, 20L drum in the shed for my bikes, but it's still $18/L, a cheaper alternative would be nice.
|
|
|
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
|
| posted on December 30th, 2013 at 11:52 AM |
|
|
Is there any oils that supercede the requirement for zinc content?
Is the required presence for zinc content just 'old form' and no longer required?
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta! |
|
|
Craig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.
|
| posted on December 30th, 2013 at 11:52 AM |
|
|
| Quote: | Originally
posted by 1303Steve
Actually a true story, we bought low k R31 Nissan Pinatra a few years ago, changed the filters and all fluids with Nulon when we got it, after a few
months the oil light was coming on (son told me checked the oil level) so I decided to change the oil and filter again thinking a bit of crud might be
in the engine as it hadn't been driven very much by the po.
|
So after a few months it burned 4lt of oil ?
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on December 30th, 2013 at 12:07 PM |
|
|
It probably wasn't at the right level to start off with
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on December 30th, 2013 at 12:29 PM |
|
|
always look for the zinc content in all the oils you use if the engine runs a flat tappet cam, that is whats important.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on December 30th, 2013 at 06:05 PM |
|
|
| Quote: | Originally
posted by bajachris88
Is there any oils that supercede the requirement for zinc content?
Is the required presence for zinc content just 'old form' and no longer required?
|
From what I've read Chris..
normal mineral oils still need the zinc and phosphorus in them..
to lubricate the camshaft mainly.. in a VW..
Now the Zinc and Phosphorus is being reduced so it won't damage catalytic converters..
Oils are changing as Castrol who had GTX and GTX2 and maybe a GTX3 ? now have just GTX in different colored containers..
the dates of the cars to be used on has changed...
the new 20w/50 GTX exceeds API SL
and its had that on it for a few years.. so, Maybe You are correct...
as We don't know what is different from say an SH or SJ oil to an SL...
they are still saying it exceeds the SL Rating even with lowered Zinc and Phosphorus levels..
Maybe the SL rating is OK for camshaft wear ???
maybe different additives are used???
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
Lucky Phil
Wolfsburg Wizard
Posts: 480
Threads: 16
Registered: August 1st, 2010
Member Is Offline
Location: Adelaide SA
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm a legend in my own lunchtime!
|
| posted on December 30th, 2013 at 07:42 PM |
|
|
Penrite HPR30 for me.
Won't touch Castrol for any reason.
I have seen it fail to perform too often over the years to bother with it.
Oh, and Fusch was cr@p, too. (but that was a while ago)
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on December 30th, 2013 at 09:41 PM |
|
|
yeah the HPR30 does have good zinc for what it is.
here is mine UOA of HPR10 ?
http://www.roktex.com.au/sharedReport?published=528804
and also to interestingly mobile1 at least in Australia have good formulation.
UOA of someone I know. mobile 1 5w30
http://pcmhacking.net/forums/download/file.php?id=5496
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
| Pages: 1 2 |
