| [ Total Views: 1608 | Total Replies: 5 | Thread Id: 88044 ] |
|
|
 Gangel
Commited Dubber
Posts: 64
Threads: 15
Registered: October 21st, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on January 8th, 2011 at 09:22 PM |
|
|
Plz help me... designing Bonnet Interior.. need ideas!!
Hey pplz!
Im just going to carpet my whole vehicle.
My car (as seen in pic0 is convertible herbie and colour theme inside is red and royal blue!
The carpet is going to be navy blue and deep red marine carpet.
I saw some pplz post pics of how they created their interior, being a plywood slab over the fuel tank, hinged to a smaller wooden ocver that hinges as
a firewall.
All this was then covered with carpet and an amp put on top
Im trying to re-find the pics so i can copy it but im interesting in the inside of the bonnet of pplz cars (generally ones that are carpetted, not
just sprayed nicely)
Any help really appreciated!!!
Glenn
|
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 8th, 2011 at 09:43 PM |
|
|
From the factory they were lined with a sort of stiff cardboard. If I was going to line mine then my preference would just be to cut out a piece of
carpet the right shape and just place it in there, possibly with some kind of underlay. No need for paneling underneath, and I wouldn't glue it
either so that you have ready access to everything. You could possibly attach it using Velcro strips if you wanted to be fancy.
|
|
|
Gangel
Commited Dubber
Posts: 64
Threads: 15
Registered: October 21st, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on January 9th, 2011 at 03:09 AM |
|
|
cheer wave, i appreciate the opinion and response but im aiming towards putting in panelling.. just something ive wanted to do to it that i like.
I have anoyher 1960's that i plan to just carpet the front just as u have specified 
|
|
|
Gangel
Commited Dubber
Posts: 64
Threads: 15
Registered: October 21st, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on January 11th, 2011 at 12:39 AM |
|
|
anyone?? 
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 11th, 2011 at 09:18 AM |
|
|
if you run a piece of straight tver on front of the fuel box and mount to the fenders either side it will give you something to mount your plywood to.
Grab a large piece of cardboard like a fridge box... The make a template out of that try and go as wide as you can into the wheel arches but rember
wood doesn't bend like cardboard. I did one piece for the big flat ocross the fuel tank and up to the wiring box. Carpet this individually then its
easier to remove later. Then make a neat piece to go in front of the wiring and gauges I didn't have an air box so I wedged it inter the bonnet lip.
Then you can also mount a price to go down the front of the wheel well be careful here as you may lose space for the wheel
|
|
|
Gangel
Commited Dubber
Posts: 64
Threads: 15
Registered: October 21st, 2010
Member Is Offline
Theme: UltimaBB Psyche Blue
|
| posted on January 13th, 2011 at 09:49 PM |
|
|
ok great, thanks.
Have you got pics up of what you did?
|
|
|
