Subject: trouble fitting alternator a 1600 motor carby will not fit
ron53
Learner Dubber
Posts: 1
Threads: 1
Registered: September 12th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on May 28th, 2011 at 10:38 AM
trouble fitting alternator a 1600 motor carby will not fit
Hi Has anyone had trouble fitting a alternotor to a 1600 motor. I cannot fit the carby. The linkages for the accellator pump hit the alternator.
Can any one help
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12755
Threads: 731
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
posted on May 28th, 2011 at 10:47 AM
Thats correct
There are 2 different set ups
I have seen people grind away sections of the alternator
Pretty sure you can flip the linkage around???
Otherwise you need a different carb
Futue te ipsum!!!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on May 28th, 2011 at 10:54 AM
I just took a grinder too it. few minutes and problem solved. The side of the alternator has some pretty thick flesh, its hard to go all the way
through it.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
