[ Total Views: 2652 | Total Replies: 31 | Thread Id: 91119 ] |
Pages: 1 2 |
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 02:50 PM |
|
|
Blue plate troubles !
Hi All,
I have a couple of questions for you regarding my highly modified, How do you get it blue plated ?? I have just imported my 1968 bettle which has been
modifed a lot and I am being told that there are some things on it that will not be able to blue plated, I have listed most of the mods below and
marked the ones that are suspect
1. 2110cc engine with twin webers, Modified exhaust
2. Front disc brakes
3. Goodridge brake hoses
4. Coil over suspension front and rear (suspect)
5. Rear camber compensator
6. 2” narrowed front beam to compensate for track after fitting front discs ( suspect)
7. Dropped front spindles ( not possible)
8. Uprated front sway bar
9. Grant steering wheel
10. Empi “8” alloy wheels
11. External oil cooler
12. Remote oil filter
13. Electric fuel pump
14. Rear frame brace ( suspect)
15. Uprated gearbox mountings
16. Shaved door handles (illegal and I have new door skins and handles)
17. Different front seats.
I was also told that it may well be better to go for LH10 street rod plate ??? have to say its causing a bit of a nightmare, when I see some of the
beat up wrecks that drive on the road on the gold coast :o), I only drove the car for a max of 800 miles in the UK after totally restoritng and it is
built with safety in mind as my job is a Race engineer :o)
If you have any pointers for my prodicament I would appreciate it if you could let me know
Thanks
Daz
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
posted on June 19th, 2011 at 08:18 PM |
|
|
YIKES....
there are many VWs on the road in Australia with lots of mods..
but from what I can see... QLD seems to be the worst state to have modifications passed by an engineer...??
Hopefully, someone on here can point You to a VW friendly engineer up Your way....
and VW owners with hotrods usually have a friendly engineer..
best of luck....
LEE
[68 Beetles in Australia all had front disc brakes]
many beetles have dropped spindles too...
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
posted on June 19th, 2011 at 08:29 PM |
|
|
You will need to get an engineers report
I would start with a phone call to these guys
http://www.customveedub.com.au/store/index.php
As far as I know, you will have trouble with the dropped spindles and coil overs
No idea on the shaved door handles
Most of the other things I cant see why you wouldnt be able to get them engineered
Futue te ipsum!!!
|
|
bugzla
Custom Title Time!
Posts: 1164
Threads: 240
Registered: June 9th, 2007
Member Is Offline
Location: townsville
Theme: UltimaBB Pro Blue ( Default )
Mood: always happy
|
posted on June 19th, 2011 at 08:32 PM |
|
|
shaved door handles are only a problem if the out side popper or switch is not marked clearly for saftey reasons only
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 08:36 PM |
|
|
Quote: | Originally
posted by bugzla
shaved door handles are only a problem if the out side popper or switch is not marked clearly for saftey reasons only
|
If thats the case I have no problem putting a big red arrow pointing to it to get it through the blue plate
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 08:37 PM |
|
|
Quote: | Originally
posted by Bizarre
You will need to get an engineers report
I would start with a phone call to these guys
http://www.customveedub.com.au/store/index.php
As far as I know, you will have trouble with the dropped spindles and coil overs
No idea on the shaved door handles
Most of the other things I cant see why you wouldnt be able to get them engineered
|
Ok will give them a call, had a look at there web site and they seel dropped spindles and coil overs so they may know a way of getting it passed ?????
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
posted on June 19th, 2011 at 08:40 PM |
|
|
Worst state???
Qld would be one of the easiest, we had our subi conversion, steering rack, brakes etc blue plated on our split for $80. try doing that in VIC.
Quote: | Originally
posted by 68AutoBug
YIKES....
there are many VWs on the road in Australia with lots of mods..
but from what I can see... QLD seems to be the worst state to have modifications passed by an engineer...??
Hopefully, someone on here can point You to a VW friendly engineer up Your way....
and VW owners with hotrods usually have a friendly engineer..
best of luck....
LEE
[68 Beetles in Australia all had front disc brakes]
many beetles have dropped spindles too...
Lee
|
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 08:46 PM |
|
|
Quote: | Originally
posted by kombibob
Worts state???
Qld would be one of the easiest, we had our subi conversion, steering rack, brakes etc blue plated on our split for $80. try doing that in VIC.
Quote: | Originally
posted by 68AutoBug
YIKES....
there are many VWs on the road in Australia with lots of mods..
but from what I can see... QLD seems to be the worst state to have modifications passed by an engineer...??
Hopefully, someone on here can point You to a VW friendly engineer up Your way....
and VW owners with hotrods usually have a friendly engineer..
best of luck....
LEE
[68 Beetles in Australia all had front disc brakes]
many beetles have dropped spindles too...
Lee
|
|
Who did it for ya mate ????
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
posted on June 19th, 2011 at 08:49 PM |
|
|
His name is barry ryan, i will get his number for you tomorrow at work.
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
posted on June 19th, 2011 at 08:52 PM |
|
|
just found it
0417634016
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 08:53 PM |
|
|
Quote: | Originally
posted by kombibob
His name is barry ryan, i will get his number for you tomorrow at work.
|
That would be great mate, I am guessing he is VeeDub friendly
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
posted on June 19th, 2011 at 08:58 PM |
|
|
Yep you will be fine, just tell him rob from patrick autocare put you on to him
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 09:05 PM |
|
|
sounds really good mate, is up around Brissy ??? as the car is sat on the docks there at the moment ?
|
|
kombibob
Custom Title Time!
AKA: Volkswagen Type 2 Transporter Van Robert
Posts: 1698
Threads: 173
Registered: May 15th, 2004
Member Is Offline
Location: noosa hinterland
Theme: UltimaBB Psyche Grey
Mood: at by cows
|
posted on June 19th, 2011 at 09:07 PM |
|
|
i work at the docks and he comes in every couple of weeks to do some work for us, so give him a call it could work in well.
1961 swb buggy
1960 karmann ghia
1963 Single Cab: "El Concreto"
1963 bent 23 window " Frieda Samba "
1963 Eriba Faun camper " Cara Van daCamp"
2012 Skoda Octavia scout
Get down low and go,go,go
|
|
pod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline
Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better
|
posted on June 19th, 2011 at 09:08 PM |
|
|
Quote: | Originally
posted by kombibob
Worst state???
Qld would be one of the easiest, we had our subi conversion, steering rack, brakes etc blue plated on our split for $80. try doing that in VIC.
|
or NSW
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 09:10 PM |
|
|
Quote: | Originally
posted by kombibob
i work at the docks and he comes in every couple of weeks to do some work for us, so give him a call it could work in well.
|
Ok will do, cheers Rob
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
posted on June 19th, 2011 at 09:19 PM |
|
|
Good on ya Bob
I love this site.
As usual it's getting in touch with the right dude that knows the rules !!
Good luck with getting rego mate. Sounds like a cool ride.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 19th, 2011 at 09:24 PM |
|
|
me too my stress level is going down a little now
|
|
MISS VDUB
A.k.a.: Ash
Super Administrator
Mrs KOMBIBOB
Posts: 2565
Threads: 96
Registered: September 20th, 2005
Member Is Offline
Location: Beautiful Sunshine Coast, QLD
Theme: UltimaBB Pro White
Mood: Low down and Dirty
|
posted on June 19th, 2011 at 11:56 PM |
|
|
All about who you know, not what you know. Some people will convince you they know everything
All the best!
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
|
|
Yogie
Super Moderator
Posts: 1603
Threads: 108
Registered: June 7th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue
|
posted on June 20th, 2011 at 02:04 PM |
|
|
Can you let me know how you go with him? I am looking at putting 2" dropped spindles along with a 2" narrowed beam on our ghia so we can fit the
17" x 7" Porsche twists under the guards.
Yogie
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 22nd, 2011 at 08:21 PM |
|
|
UPDATE !!
After numerous phone calls to 4 different engineers qualified to issue Mod plates, due to the mods listed on my beetle I have been told the only way
to get it registered is either remove the beam and drop spindles and coil over suspension and go back to standard, then put it all back on, which
means if there is a accident I will be in the S**t as the vehicle will probably be inspected. The second option would be to try and go down the street
rod route (code LH10), which means joining the Australian Street Rod Federation and using there Technical commission to help with the registration, if
they except the beetle as a street rod ???
Will let you know what happens.
|
|
MISS VDUB
A.k.a.: Ash
Super Administrator
Mrs KOMBIBOB
Posts: 2565
Threads: 96
Registered: September 20th, 2005
Member Is Offline
Location: Beautiful Sunshine Coast, QLD
Theme: UltimaBB Pro White
Mood: Low down and Dirty
|
posted on June 22nd, 2011 at 10:40 PM |
|
|
So you didn't take the advice and call Barry?
1963 Single Cab Ute: "El Concreto"
1962 Baja Beetle: "Peanut"
1968 Porsche 912 SWB: "Pip"
1972 Kombi Snail: "The Snail"
2012 Skoda Octavia Scout: "Scout"
2016 Scirocco R: "Rocco"
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on June 23rd, 2011 at 06:33 AM |
|
|
Quote: | Originally
posted by MISS VDUB
So you didn't take the advice and call Barry?
|
Yep called Barry he was one of the guys I spoke to, he them put me onto someone else and then they put me onto someone else , Barry couldn't help due to the Mods tht had been done
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on August 7th, 2011 at 10:18 AM |
|
|
All done and rego'd and on the road !!!!
|
|
Paulc1964au
Custom Title Time!
Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
|
posted on August 7th, 2011 at 10:23 AM |
|
|
Thats great news what was the resolution?
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on August 7th, 2011 at 12:21 PM |
|
|
Found a guy near me with some common sense !, he checked it out, did a mod plate for me and roadworthy all at the same time
|
|
DylanTheDubber
Custom Title Time!
Posts: 1252
Threads: 173
Registered: June 5th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
posted on August 7th, 2011 at 03:12 PM |
|
|
What cost is it to get a mod plate?
I Live part time in Southport, Gold coast.
From Dylan
|
|
Rossi46
Slammed & Awesome Dubber
Posts: 75
Threads: 14
Registered: October 21st, 2009
Member Is Offline
Location: Labrador, QLD
Theme: UltimaBB Pro Blue
Mood: SAD !!!! :O((((
|
posted on August 7th, 2011 at 04:10 PM |
|
|
$180+
|
|
cam070
Custom Title Time!
Posts: 1332
Threads: 53
Registered: July 25th, 2009
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Getting hands dirty stripping the bug down
|
posted on August 7th, 2011 at 10:03 PM |
|
|
Great to hear there is another nicely modified bug cruising Oz. Welcome aboard!
|
|
waveman1500
Custom Title Time!
Also rides a Honda
Posts: 1346
Threads: 13
Registered: December 17th, 2009
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
posted on August 7th, 2011 at 10:49 PM |
|
|
Congratulations.
I find it highly unacceptable that there is so much difference between what different people tell you! If you have already asked three different
engineers for their interpretations of the laws then you would've thought that you would get the final definition of what is and isn't legal. How is
the average bloke supposed to know what he can do to a car if it is such a grey area of legal argument?!
|
|
Pages: 1 2 |