| [ Total Views: 1323 | Total Replies: 8 | Thread Id: 98696 ] |
|
|
 Nickster
Officially Full-On Dubber
Posts: 302
Threads: 34
Registered: July 28th, 2008
Member Is Offline
Location: Narangbaaaaaaaa, QLD
Theme: XMBX Pro Green
Mood: Rolling with 'The Dub Collective'
|
 posted on September 5th, 2012 at 05:27 PM |
|
|
Rattle can respray of seat frames
I want to sand back the seat frames from my '62 bug and respray them but have limited funds so am looking to use rattle cans.
I've read some differing opinions about brands etc. but I'm keen to know if anyone else has done this and if so whether they have found a colour
that comes close to the standard cream/almond colour of the original frames?
1962 Deluxe Beetle
1970 Low Light Microbus
|
|
|
tar76
Custom Title Time!
Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline
Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective
|
| posted on September 5th, 2012 at 06:00 PM |
|
|
Don't use off the shelf stuff from autobahn i tried some of that stuff and it just keep dimpling even with primer on first. they can actually mix
you paint up and put in a rattle can which is way better quaility paint.
"Obey your Dreams"!
62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
|
|
|
Nickster
Officially Full-On Dubber
Posts: 302
Threads: 34
Registered: July 28th, 2008
Member Is Offline
Location: Narangbaaaaaaaa, QLD
Theme: XMBX Pro Green
Mood: Rolling with 'The Dub Collective'
|
| posted on September 5th, 2012 at 06:04 PM |
|
|
Thanks Tarin, where do I go to get the paint mixed and put in the can?
1962 Deluxe Beetle
1970 Low Light Microbus
|
|
|
tar76
Custom Title Time!
Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline
Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective
|
| posted on September 5th, 2012 at 06:09 PM |
|
|
Autobahn Morayfield can do it.
"Obey your Dreams"!
62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
|
|
|
hus22l
Officially Full-On Dubber
Posts: 229
Threads: 36
Registered: April 24th, 2012
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 5th, 2012 at 06:41 PM |
|
|
I have used the rust guard enamel paint in a cream/ivory colour, about $12 a can? Bunnings. Couple of coats and looks sweet though I will go over
it with a clear coat (same stuff). Will put up photos when I am done... Seat install is about 500 items down on the to do list. I am learning about
patience with this restoration!!!
|
|
|
snitz
Wolfsburg Wizard
Posts: 605
Threads: 37
Registered: September 28th, 2008
Member Is Offline
Location: Adelaide.. the defect and taser state..
Theme: UltimaBB Psyche Red
Mood: "Bug"gered
|
| posted on September 5th, 2012 at 07:55 PM |
|
|
I know Im in Adelaide but my local Paint Supplies Shop that sells to the auto refinishing industry sell 2pak in a can.It contains hardener and reducer
all in the can and "goes off" when it hits the air. I have used this in both primer and colour matched topcoat with great success..Maybe ask aroung
for it?..
|
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 6th, 2012 at 08:04 PM |
|
|
Fella,
Focus on your prep, a good fine sand, working down in grades, 120 grit, then 180 then 240 maybe 400 if oyur really keen. Then wash them throughly and
blow them completely dry. Warm temps are best to paint in. Then buy some grease and wax remover as a prepsol (using a lint free cloth).
They need to be so clean you could rub them on a white tissue and leave no traces.
If you get to this stage then you are ready for a primer and then some paint.
Remember the 6P's : Propper Preperation prevents Piss Poor Performance.
You will find the paint wanting to look good after this preperation, even a rattle can, remember light coats building up over time, not full cover
first time.
Good Luck
|
|
|
tar76
Custom Title Time!
Posts: 1622
Threads: 95
Registered: December 18th, 2009
Member Is Offline
Location: Ningi Qld
Theme: UltimaBB Pro Blue
Mood: Rollin with The Dub Collective
|
| posted on September 7th, 2012 at 05:26 AM |
|
|
| Quote: | Originally
posted by Aussie Dubbin
Fella,
Focus on your prep, a good fine sand, working down in grades, 120 grit, then 180 then 240 maybe 400 if oyur really keen. Then wash them throughly and
blow them completely dry. Warm temps are best to paint in. Then buy some grease and wax remover as a prepsol (using a lint free cloth).
They need to be so clean you could rub them on a white tissue and leave no traces.
If you get to this stage then you are ready for a primer and then some paint.
Remember the 6P's : Propper Preperation prevents Piss Poor Performance.
You will find the paint wanting to look good after this preperation, even a rattle can, remember light coats building up over time, not full cover
first time.
Good Luck
|
Awesome info mate, i'll remember this when i do my next small rattle can jobs 
"Obey your Dreams"!
62 Std beetle.
65 11 wnd Split "The Cross".
6? coming very soon!!!!
|
|
|
Nickster
Officially Full-On Dubber
Posts: 302
Threads: 34
Registered: July 28th, 2008
Member Is Offline
Location: Narangbaaaaaaaa, QLD
Theme: XMBX Pro Green
Mood: Rolling with 'The Dub Collective'
|
| posted on September 10th, 2012 at 07:45 AM |
|
|
Thanks guys! You have reinforced why I love this forum, great advice from friendly folk 
I spent some time yesterday following your tips Aussie Dubbin and am loving the results. Pics to follow once I've given it a couple of coats of
clear.
PS I ended up using Evening Haze, a shade from Dulux in a rattle can that I found in Bunnings. It's pretty close to what I wanted.
1962 Deluxe Beetle
1970 Low Light Microbus
|
|
|
