Board Logo
Go To Bottom

Printable Version  
[ Total Views: 8483 | Total Replies: 62 | Thread Id: 102028 ]
 Pages:  1  2  3
Author: Subject:  New motor
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 02:03 PM
New motor


My new motor for my street buggy is almost there, so far.
Beautifully put together by Anthony Lees AREOPLATE Perth
2084cc
Bubble top case with oil squirter to underside of piston
78.4 Okrasa crank, dowels drilled deeper
Scat super race 5.5 rods
ARP 2000 bolts
Mahle 92mm pistons, thick wall bores , coated skirts and crown
w120 cam
1.25 Berg rockers
28mm ultra light lifters
Scat moly file down push rods
CB 044 Ultra mag plus heads 42x37.5
Berg 26mm oil pump , plugged for full flow
sand seal pulley
Compression 7.9 to 1
Balanced by HARRIS ENGINES Perth
Yet to come
Distributor maybe CB Magnaspark or Mallory with 6al
t3/4
600 Holley vac
Pipe work From Ron Lumus
Slowly getting there, only taken 2 years so far
:)

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.
Membergrogy
Custom Title Time!
*****


Avatar


Posts: 1000
Threads: 344
Registered: August 16th, 2007
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 03:36 PM



hi , i had that crank in a similar motor, a bit more hypo tho. the dowels in the crank are smaller than most similar cranks and mine twisted out in a short time. i had it drilled for wider deeper dowells and it was fine from then on. were u recommended to drill the dowels before u started
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 03:43 PM



Howdy
Yes Berg recomended it , they are only deeper ( longer) not wider
It all so has Raceware studs and Berg straight cut gears
Membergrogy
Custom Title Time!
*****


Avatar


Posts: 1000
Threads: 344
Registered: August 16th, 2007
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 04:14 PM



very nice, is it goin in a fiberglass buggy
Memberian.mezz
Wolfsburg Elder
I never said, I could write or spell
*******


Avatar


Posts: 3913
Threads: 280
Registered: September 11th, 2004
Member Is Offline

Location: Newcastle
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy

posted on May 15th, 2013 at 06:36 PM



we have a similar motor in our car.
there is going to be a lot of Holley Turbo bugs on the track soon.
Here is ours

Error
Sorry, you must be a registered user in order to download attachments.




:lol::crazy::lol::crazy::lol:
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. :fakesniff:
Member1916baja
Custom Title Time!
*****


Avatar


Posts: 1990
Threads: 176
Registered: September 20th, 2007
Member Is Offline

Location: Brisbane - Mt Gravatt
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 07:03 PM



I hope so! My new combo is pretty similar but with a turbo grind 120, scat flanged crank, 94mm bore,same heads bigger valves, bigger turbo, bigger holley and more comp! Although it is strictly a race motor! Should be a ripper motor for a buggy! Talk about loose!



http://i432.photobucket.com/albums/qq43/1916baja/BigAssWing22.jpg
Memberhellbugged
A.k.a.: Daimo Pell
23 Windows of Awesome
48's and straight cuts
********


Avatar


Posts: 5060
Threads: 113
Registered: April 17th, 2003
Member Is Offline

Location: Nambucca Valley NSW
Theme: UltimaBB Psyche Blue
Mood: Couldn't care less

posted on May 15th, 2013 at 07:24 PM



Looking good

... Don't look like berg rockers tho
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 08:16 PM



Yep glass body , Taipan
Your right with the rockers, well spotted . Yes they are EMPI's ,my mistake sorry :blush:
Membermeisterberginteriors
Seriously Crusin Dubber
**


No Avatar


Posts: 181
Threads: 7
Registered: November 23rd, 2012
Member Is Offline

Location: Australia
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 10:24 PM



Im not sure Berg liked 1.25 rockers, check it out:
http://www.geneberg.com/cat.php?cPath=6_207&osCsid=730a38618f0228968eea16...
Memberfish26
A.k.a.: benito
Fahrvergnugen
****


Avatar


Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline

Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome

posted on May 15th, 2013 at 11:05 PM



Nice build should be fun in a light buggy, 1.25:1 with W120 is ok, just run it.



bitten by the bug..........several times
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on May 15th, 2013 at 11:38 PM



Dave Kawell said it's close to a FK 45 which he uses on some motors , that with the 1.25's with the 120.
So that's where I got the combo
So that's cool we'll see how it goes
So many choices, so many combo's
Memberfish26
A.k.a.: benito
Fahrvergnugen
****


Avatar


Posts: 903
Threads: 38
Registered: July 13th, 2007
Member Is Offline

Location: sydney
Theme: UltimaBB Pro Grey
Mood: Ken awesome

posted on May 16th, 2013 at 01:42 PM



Dave Kawell also had input towards us using FK43 with either 1.25 or 1.4 in the turbo motor.



bitten by the bug..........several times
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on May 16th, 2013 at 08:25 PM



I'm looking forward to having a race against you next season Richard.... Given your weight advantage, it might be a fun chase!



FUCH your early!

http://www.noh2o.org/ 
Memberdragvw2180
Officially Full-On Dubber
***


Avatar


Posts: 390
Threads: 33
Registered: May 27th, 2006
Member Is Offline

Location: North Carolina,usa
Theme: UltimaBB Pro Blue

posted on May 17th, 2013 at 01:10 AM



JMHO , If I am going to buy a cam for my engine and a set of rockers I would rather buy one ground for the ratio I am going to run. Will your combination work , absolutely but I worry about excessive strain/ wear on the componants. I have done it in the past when I already had the engine assembled and wanted to try just a little more lift . Dave Kawell is someone I believe in , has given me nothing but excellent advice. Your engine looks great and I bet will be alot of fun, Mike McCarthy
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on September 17th, 2013 at 07:38 PM
More bits


Have had some more bits arrive. Thanks Rod P
See pic.
Talked to Lummus on Thursday, he has started but going slow. Have changed a couple of things.
Intake plenum is now an upside down D shape ( flat on bottom) the reason is to help fuel stay in suspension just like the tee on the in take manifold.
The carbie is now an alloy body Holley Street Avenger 670cfm not the 600 we originally planed to use.
will have to wait until it's all here to work out throtle pedal,cable etc

Error
Sorry, you must be a registered user in order to download attachments.
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on September 19th, 2013 at 11:16 PM



Loving the toys.... That FPR looks very familiar... Looking forward to seeing the plumbing from Ron.



FUCH your early!

http://www.noh2o.org/ 
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 05:52 PM
Turbo system build has started


Received some pic's from Ron Lummas of the turbo system been built.
Will have some more pic's tomorrow hopefully
.
Oh so close

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 05:59 PM
build


new build

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 06:00 PM
new build


new build

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 06:00 PM
new build


new build

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 06:01 PM
new build


new build

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 2nd, 2013 at 06:02 PM
new build


new build

Error
Sorry, you must be a registered user in order to download attachments.
Memberhumpty
Bishop of Volkswagenism
******


Avatar


Posts: 3336
Threads: 139
Registered: September 2nd, 2002
Member Is Offline

Location: Fremantle
Theme: UltimaBB Pro Blue ( Default )
Mood: Totally boosted!

posted on October 3rd, 2013 at 01:04 AM



Nice..... Hows the car coming?



FUCH your early!

http://www.noh2o.org/ 
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 3rd, 2013 at 06:59 PM
car


Car is still rego'd
Have to put new disc's and drums on and pads. 5x130
Shim the front end
Have to work out throtle cable when motor is in.
Oil lines
a bit of wiring
the box will come soon, just want to get it going, so no beating up on it for a little bit.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 11th, 2013 at 10:22 AM
turbo build


Some more pic's,:cool:

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 11th, 2013 at 10:23 AM
more pic's


more pic's

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 11th, 2013 at 10:24 AM
more pic's


some more pic's

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 11th, 2013 at 10:25 AM
more pic's


more pic's

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 12th, 2013 at 12:19 PM
Another pic


Another pic came in from Ron Lummus racing Facebook page

Error
Sorry, you must be a registered user in order to download attachments.
Memberturboboy
Seriously Crusin Dubber
**


Avatar


Posts: 117
Threads: 34
Registered: September 2nd, 2008
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on October 30th, 2013 at 09:48 AM
turbo build


getting closer

Error
Sorry, you must be a registered user in order to download attachments.
 Pages:  1  2  3


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 20.6% - SQL: 79.4% ]
#Duration:Query:
1.0.00044703SELECT * FROM ubb_settings
2.0.00033808SELECT moderator FROM ubb_forums WHERE moderator != ''
3.0.00036001SELECT DISTINCT uid FROM ubb_members WHERE username = 'BUGBOY'
4.0.00027704SELECT DISTINCT uid FROM ubb_members WHERE username = 'MickH'
5.0.00029206SELECT DISTINCT uid FROM ubb_members WHERE username = 'barls'
6.0.00029111SELECT DISTINCT uid FROM ubb_members WHERE username = 'vanderaj'
7.0.00019598SELECT DISTINCT uid FROM ubb_members WHERE username = 'Cam'
8.0.00024414SELECT DISTINCT uid FROM ubb_members WHERE username = 'vw54'
9.0.00017810SELECT DISTINCT uid FROM ubb_members WHERE username = 'SuperOwen'
10.0.00020599SELECT DISTINCT uid FROM ubb_members WHERE username = 'helbus'
11.0.00018287SELECT DISTINCT uid FROM ubb_members WHERE username = '65busser'
12.0.00016999SELECT DISTINCT uid FROM ubb_members WHERE username = 'Baja Wes'
13.0.00015998SELECT DISTINCT uid FROM ubb_members WHERE username = 'Dasdubber'
14.0.00016189SELECT DISTINCT uid FROM ubb_members WHERE username = 'MISS VDUB'
15.0.00072408SELECT LENGTH(robot_string) AS strlen, robot_string, robot_fullname FROM ubb_robots ORDER BY strlen DESC
16.0.00025606SELECT f.fid, f.theme FROM ubb_forums f, ubb_threads t WHERE f.fid = t.fid AND t.tid = '102028'
17.0.00037003DELETE FROM ubb_whosonline WHERE ip = '3.235.179.79' && (username = 'xguest123' OR username = 'xrobot123' OR username = 'Anonymous') OR time < '1624272587'
18.0.00017905INSERT INTO ubb_whosonline (username, ip, time, location, invisible, robotname) VALUES ('xguest123', '3.235.179.79', LPAD('1624273187', '15', '0'), '/viewtopic.php?tid=102028', '0', '')
19.0.00018191DELETE FROM ubb_guestcount WHERE ((ipaddress = '3.235.179.79') OR (onlinetime < '1624186787'))
20.0.00011778DELETE FROM ubb_robotcount WHERE ((ipaddress = '3.235.179.79') OR (onlinetime < '1624186787'))
21.0.00008798INSERT INTO ubb_guestcount (ipaddress, onlinetime) VALUES ('3.235.179.79', '1624273187')
22.0.00017214SELECT * FROM ubb_themes WHERE themeid = '1'
23.0.00014305SELECT * FROM ubb_pluglinks ORDER BY displayorder ASC
24.0.00015116SELECT id FROM ubb_banned WHERE ((ip1 = '3' OR ip1 = '-1') AND (ip2 = '235' OR ip2 = '-1') AND (ip3 = '179' OR ip3 = '-1') AND (ip4 = '79' OR ip4 = '-1')) AND NOT (ip1 = '-1' AND ip2 = '-1' AND ip3 = '-1' AND ip4 = '-1')
25.0.00054502SELECT fid, type, name, fup, status, private, userlist, password FROM ubb_forums WHERE private != '5' AND private != '3' AND private != '2' AND userlist = '' AND password = '' AND status = 'on' ORDER BY displayorder
26.0.00019813SELECT themeid, name FROM ubb_themes
27.0.00105786SELECT name, template FROM ubb_templates WHERE name IN ('functions_bbcode', 'functions_bbcodeinsert', 'functions_smilieinsert_smilie', 'functions_smilieinsert', 'viewtopic_reply', 'viewtopic_quickreply', 'viewtopic', 'viewtopic_invalid', 'viewtopic_modoptions', 'viewtopic_newpoll', 'viewtopic_newtopic', 'viewtopic_poll_options_view', 'viewtopic_poll_options', 'viewtopic_poll_submitbutton', 'viewtopic_poll', 'viewtopic_post', 'viewtopic_post_email', 'viewtopic_post_site', 'viewtopic_post_icq', 'viewtopic_post_aim', 'viewtopic_post_msn', 'viewtopic_post_yahoo', 'viewtopic_post_search', 'viewtopic_post_profile', 'viewtopic_post_pm', 'viewtopic_post_ip', 'viewtopic_post_repquote', 'viewtopic_post_report', 'viewtopic_post_edit', 'viewtopic_post_delete', 'viewtopic_post_attachmentimage', 'viewtopic_post_attachment', 'viewtopic_post_attach_noborder', 'viewtopic_post_attimg_noborder', 'viewtopic_post_sig', 'viewtopic_post_nosig', 'viewtopic_printable', 'viewtopic_printable_row', 'viewtopic_multipage', 'viewtopic_post_attachment_none', 'viewforum_rules', 'viewtopic_post_blog', 'viewtopic_post_rpg', 'viewforum_mpn_info', 'viewtopic_next_prev_links', 'viewtopic_captcha', 'css', 'error', 'footer', 'footer_querynum', 'footer_load', 'footer_phpsql', 'footer_totaltime', 'header', 'message', 'meta_tags', 'shadow', 'shadow2')
28.0.00080180SELECT t.tid, t.fid, t.subject, t.views, t.replies, t.closed, t.topped, l.uid as lp_uid, l.username as lp_user, l.dateline as lp_dateline, l.pid as lp_pid FROM ubb_threads t LEFT JOIN ubb_lastposts l ON l.tid = t.tid WHERE t.tid = '102028'
29.0.00021505SELECT * FROM ubb_forums WHERE fid='74' AND status='on'
30.0.00017309SELECT code, url FROM ubb_smilies WHERE type = 'smiley'
31.0.00008988SELECT find, replace1 FROM ubb_words
32.0.00018883SELECT id, title, posts, stars, allowavatars, avatarrank FROM ubb_ranks
33.0.00024414UPDATE ubb_threads SET views = views+1 WHERE tid = '102028' LIMIT 1
34.0.00047779SELECT COUNT(pid) FROM ubb_posts WHERE tid = '102028'
35.0.01211786SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 102028 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline < x.dateline AND t.fid = '74' ORDER BY l.dateline DESC LIMIT 1
36.0.01185513SELECT t.tid as t_tid FROM ubb_threads t LEFT JOIN ubb_threads o ON o.tid = 102028 LEFT JOIN ubb_lastposts l ON l.tid = t.tid LEFT JOIN ubb_lastposts x ON x.tid = o.tid WHERE l.dateline > x.dateline AND t.fid = '74' ORDER BY l.dateline ASC LIMIT 1
37.0.00144887SELECT vote_id FROM ubb_vote_desc WHERE topic_id = '102028'
38.0.00061989SELECT pid FROM ubb_posts WHERE tid = '102028' ORDER BY pid LIMIT 0, 30
39.0.01361418SELECT * FROM ubb_attachments WHERE pid IN('955754', '955759', '955761', '955764', '955780', '955788', '955794', '955800', '955824', '955832', '955833', '955864', '955920', '955948', '970174', '970393', '971539', '971540', '971541', '971542', '971543', '971544', '971592', '971669', '972403', '972404', '972405', '972406', '972489', '974010')
40.0.00219917SELECT p.*, m.*,w.time FROM ubb_posts p LEFT JOIN ubb_members m ON m.username = p.author LEFT JOIN ubb_whosonline w ON p.author = w.username WHERE p.fid = '74' AND p.tid = '102028' ORDER BY p.pid ASC LIMIT 0, 30