| [ Total Views: 1447 | Total Replies: 5 | Thread Id: 105608 ] |
|
|
 john_p23
Learner Dubber
Posts: 15
Threads: 6
Registered: May 27th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 30th, 2014 at 06:27 AM |
|
|
1303 front hub and brake modify
Hi' all
'm after someone that can modify 944 front hub to fit 1303 spindle and make the caliper bracket to fit porsche brake.
My plan is to fit porsche brake and hub on to stock 1303 spindle. And run 5x130 porsche wheels.
Either modify 944 hub or customize new hub. I" ll supply hub and caliper.
If you can help me out. I'm in Sydney
Thank you very much
John
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on March 30th, 2014 at 08:50 AM |
|
|
Have a look at VeeDubEngineering (Canada I believe). As there are variations with which 944 parts you have, they do many different versions of what
you require. Not cheap, but hey, you get what you pay for.
For the record, you need to make spacer rings to adapt the vw bearings into the 944 hubs and make the mount for the caliper. There are a few versions
of caliper too....
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
karmann141
Wolfsburg Wizard
Posts: 485
Threads: 48
Registered: August 27th, 2009
Member Is Offline
Location: Carindale - Brisbane
Theme: UltimaBB Pro Blue
|
| posted on March 30th, 2014 at 09:42 PM |
|
|
If you have the complete early NA 944 hub, it will simply bolt straight onto the 1303 two bolt strut - it is exactly the same tang size and bolt
spacing. Then there's no mucking around with bearing sizes, spacers and caliper brackets. It's all factory Porsche and no problems with having it
engineered.
You will however need the 17mm lower ball joint from Kerscher in Germany who make it specifcally for this application.
http://www.kerscher-tuning.de/kaefer/index.php?gruppe1=Bremsanlagen&grupp... Umrüstung Porsche-Bremse
Sorry website would not copy correctly - just reclick vw special then brakes
You will also need slightly longer tie rods from Veedub Engineering in Canada (he knows the length you need). He was actually much cheaper than trying
to get custom tie rods made locally in Brisbane from a VW specialist.
http://vdubengineering.com/brake-parts-kits/
1961 K Ghia - Porsche 5 sp, EJ20T, Brembo's, Dble A arm susp
1974 L Bug - Porsche 944 brakes, Boxster 16's
1974 Bay Camper - EJ20, twin radiators, Boxster 16x7's
Half Beetle trailer with Boxster 16x7's
2011 Tiguan TDI 4Motion
2010 LR Discovery 4 TDV
|
|
|
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on March 30th, 2014 at 10:16 PM |
|
|
Thanks for the correct advice, I didn't notice the 1303 bit.....
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
|
|
|
john_p23
Learner Dubber
Posts: 15
Threads: 6
Registered: May 27th, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on March 31st, 2014 at 07:00 PM |
|
|
Hi' all
The reason I'm trying to use stock spindle coz don't wanna upset the camber and also the hub and brake are off 86 model 944 n/a. Sending
the parts to Canada and back may cost me neary the same as do it here according to vdubengineering website they charge about $340 US. To make the hub
fit type1 bearing and spindle. Then plus shiping cost. That's why i'm happy to pay someone local for same amout of money.
|
|
|
vwo60
Veteran Volks Folk
Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline
Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good
|
| posted on April 1st, 2014 at 07:29 AM |
|
|
AS karmann141 said, the cheapest option is to change the spindles, ball joints and tie rods, then you have a complete bolt on set up without the need
for adaptors and mods to the hub, you need to talk to a engineer about the changes you want to make.
|
|
|
