| [ Total Views: 589 | Total Replies: 7 | Thread Id: 106098 ] |
|
|
 Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 18th, 2014 at 09:16 PM |
|
|
Electric shock from dizzy. Constant when running
Any ideas? My HT lead from coil to middle of dizzy is giving me a hell of a shock and I can't work out why? Could it be a bad lead or bad lead
connection. It's not the leads that go to cylinders just the one.
It's not fun testing it each time too.
Thought maybe a bad earth? Earth for alternator goes back to battery and I piggy backed this to the fuel pump mount?
Cheers
|
|
|
 barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on May 18th, 2014 at 09:50 PM |
|
|
possibly old leads.
its not a good idea to touch them while its running as you have just found out.
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on May 18th, 2014 at 09:53 PM |
|
|
Isn't that normal for a dizzy with kind of leads VW tend to have on them?
I got shocked every time just about with any car that has a dizzy and therefore I do not touch them when they run, not even if the engine not running
and ignition on. ouch!
the reason you get shocked is, you are being a shorter path to ground for the high voltage. Because the high voltage has to jump the rotor button gap
plus the plug gap, resistance in the ignition leads, crappy boot on the center lead wont give enough resistance from it to your hand, so it is taking
that path.
If you use copper core leads from dizzy to plugs, that should reduce the incidence of shocks, I would check the resistance of your leads, they might
be stuffed and getting shocked easier as a result.
I remembered I was fixing a car for my uncles neighbour long time ago, its leads were stuffed and the sparks were jumping from the coil to the block
which were about 60mm sparks !! leads read like 15K resistance, new ones were 1.5-3k it was safe to touch after that.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
Aussie Dubbin
Fahrvergnugen
Posts: 895
Threads: 90
Registered: July 21st, 2008
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 18th, 2014 at 10:18 PM |
|
|
Cheers the leads aren't that old I will check brand tomorrow but in pretty good nick I thought. And I'll measure resistance too. Thanks fellas
|
|
|
ACE76
Seriously Crusin Dubber
Posts: 105
Threads: 19
Registered: August 4th, 2005
Member Is Offline
Location: Victoria
Theme: UltimaBB Pro Purple
Mood: ACE 30 FOR SALE!
|
| posted on May 18th, 2014 at 10:23 PM |
|
|
You can get a shock from the outside of the lead, from induced voltage: no direct contact needed -- anything above 2 or 3000V could do this, depending
on distance etc. If you are holding the centre lead to check for spark strength, hold it in the middle with insulated pliers.
ACE 30 & ACE 40 oil: specially formulated for your Air Cooled Engine...
Delivery free Outer Eastern Melb. & Dandenong Ranges.
from$19 for 2.5L (spot-on for 1 fill, re-use bottle to measure), or $29 for 5L (2 fills)
|
|
|
vlad01
Compulsive Aussie Vee Dubber
Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline
Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways
|
| posted on May 18th, 2014 at 10:29 PM |
|
|
2-3000v?
add another 0 there for conventional coil, double that again for DIS type coil packs.
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE |
|
|
mgiles
A.k.a.: Mark
Casual Dubber
Posts: 34
Threads: 6
Registered: January 6th, 2014
Member Is Offline
Location: Adelaide, SA
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 19th, 2014 at 10:26 AM |
|
|
| Quote: | Originally
posted by ACE76
If you are holding the centre lead to check for spark strength, hold it in the middle with insulated pliers.
|
x2 - if checking for spark I use a pair of insultated needle nose vise grips lightly gripping the wire so it wont get damaged.
Cant say I have ever been zapped being in the vicinity of wires though.
|
|
|
AA003
A.k.a.: Phill
Custom Title Time!
Posts: 1189
Threads: 39
Registered: October 27th, 2011
Member Is Offline
Location: Southern Highlands
Theme: UltimaBB Streamlined2
|
| posted on May 19th, 2014 at 07:39 PM |
|
|
I always put my tongue on it to check for voltage.
I read it on samba, so it must be correct.
Sometimes Volkswagen dealers sell spare parts. Amazing isn't it!
|
|
|
