| [ Total Views: 668 | Total Replies: 4 | Thread Id: 108709 ] |
|
|
 donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on April 1st, 2015 at 01:29 PM |
|
|
Alternator bearings
So after a short bit of investigation I have found that the strange whiring noise I can hear only in the cabin is the alternator bearings, can't hear
anything when I lift the deck lid but removed the belt and the noise is gone, so after refering to my three books the closest I found was how to
remove the alternator and then take it to a repairer (HOW TO KEEP YOUR VOLKSWAGEN ALIVE)
so I'm about to remove the alternator, getting through the fuel injection stuff looks like a bit of a mission 
Any hints before I start will be greatfully received.
Thanks
Don
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
 barls
A.k.a.: Mr indestructible
Super Administrator
Causer of Chaos and Mayhem
Posts: 9467
Threads: 295
Registered: June 22nd, 2004
Member Is Offline
Location: cruising in denistone east
Theme: UltimaBB Streamlined2
Mood: indestructible? and listening to the voices
|
| posted on April 1st, 2015 at 02:04 PM |
|
|
mark anything you disconnect.
should only take them an hour to do the bearings.
|
|
|
LUFTMEISTER
Veteran Volks Folk
Posts: 2041
Threads: 119
Registered: July 13th, 2005
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: BRISVEGAS in a state of flux
|
| posted on April 1st, 2015 at 02:31 PM |
|
|
Take photos with your camera/phone before you start anything. You can always refer back to it if required. My2c
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on April 1st, 2015 at 04:01 PM |
|
|
I was planning on replacing the bearings myself, not a good idea?
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on April 1st, 2015 at 05:45 PM |
|
|
| Quote: | Originally
posted by donn
I was planning on replacing the bearings myself, not a good idea?
|
Nah, simple as mate. Bit different to a genny but so long as you're careful it'll come apart pretty easy. Only tricky thing is trying to get
something behind the bearing to be able to pull is off. This is when those 2 piece bearing pullers come in handy but a bit of angle iron modded to fit
onto a hub puller normally does the trick 
madness is in the eye of the beholder  |
|
|
