Board Logo
Go To Bottom

Printable Version  
[ Total Views: 724 | Total Replies: 6 | Thread Id: 110175 ]
Author: Subject:  Steering column radial play. 59 beetle
Memberoldturtle22
Officially Full-On Dubber
***


Avatar


Posts: 267
Threads: 57
Registered: November 26th, 2011
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )

posted on November 23rd, 2015 at 09:49 AM
Steering column radial play. 59 beetle


My 59 beetle has radial play or up and down movement so I purchased a new column bearing kit and nylon bush.
Not sure about the nylon bush though. Mine is either missing or its the wrong part.
My original bush fitted to the column is much smaller and looks like its been heat shrunk on.
The original bearing doesn't seem like its in bad nick.
Are both bushes meant to be installed?
Has anyone got a pictorial breakdown or come across this before?
Membergrumble
Son of Jim - Creator of Good
******


Avatar


Posts: 2668
Threads: 53
Registered: June 10th, 2008
Member Is Offline

Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time

posted on November 24th, 2015 at 07:05 AM



From memory some of the early columns had a convoluted metal bush between the bearing and the bush to take up the play.
Memberoldturtle22
Officially Full-On Dubber
***


Avatar


Posts: 267
Threads: 57
Registered: November 26th, 2011
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )

posted on November 24th, 2015 at 12:59 PM



Ok. I do recall seeing something like this on one of the parts sites.

Ill check it out again. Thanx
Memberpsimitar
Son of Jim - Creator of Good
******


Avatar


Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline

Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue

posted on November 24th, 2015 at 05:44 PM



Is your column and wheel the early type with the indicator switch held to the column with a metal strap and the wheel is a half batwing type wheel? Or the later cast indicator that sits ontop of the column with a grub screw to hold it in place and then the classic D type horn ring dishes bakerlite wheel?

I've got both a 59-60 and a 56 so can easily tell ya what is what :)




madness is in the eye of the beholder :yes:
Memberoldturtle22
Officially Full-On Dubber
***


Avatar


Posts: 267
Threads: 57
Registered: November 26th, 2011
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )

posted on November 24th, 2015 at 06:28 PM



Hi Mike.

Its the second type. Its got an existing nylon bush but its more like a thick heat shrink.

Amd ive still got ur springplates. Ill try my best to get there before xmas!!!

Cheets bud
Memberdonn
Wolfsburg Elder
*******


Avatar


Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline

Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED

posted on November 24th, 2015 at 08:47 PM



Quote:
Originally posted by grumble
From memory some of the early columns had a convoluted metal bush between the bearing and the bush to take up the play.


I've got this on my 76 so may be an alternative for all models.




I dream of a day when a chicken can cross a road without being asked for it's motive!
Memberpsimitar
Son of Jim - Creator of Good
******


Avatar


Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline

Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue

posted on November 25th, 2015 at 04:50 PM



Quote:
Originally posted by oldturtle22
Hi Mike.

Its the second type. Its got an existing nylon bush but its more like a thick heat shrink.

Amd ive still got ur springplates. Ill try my best to get there before xmas!!!

Cheets bud


Hiya Chris,

So for my one it has a concave ball bearing type bearing housing pressed into the top of the column. Then a curved washer sits against that bearing and then there a spring that rests on that bearing and then the underside of the steering wheel.

The early batwing has the metal boss of the wheel slide into a pressed in solid bush at the top of the column and so only grease stops the wheel and column from binding against each other.

The later ball bearing allows things to roll against each other.

No worries on the spring plates. I sold the pan without them last month as having a bit of a clean out downstairs. Maybe throw me a few bucks and put the plates for sale on here?

Laters,
Mike




madness is in the eye of the beholder :yes:


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.4% - SQL: 97.6% ]