| [ Total Views: 1393 | Total Replies: 3 | Thread Id: 112064 ] |
|
|
 njg02
Seriously Crusin Dubber
Posts: 145
Threads: 37
Registered: May 12th, 2005
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Grateful.
|
| posted on January 24th, 2017 at 11:25 AM |
|
|
What size spot weld drill?
I'm removing the firewall and replacing same. Any ideas as to what size spot weld drill I should use?
Thanks.
71 super in progress.
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on January 24th, 2017 at 11:48 AM |
|
|
http://www.suttontools.com/products/spot-weld-drills-pd142/
6.5 mm should do most spots. Cut through one metal thickness, leaving the 'good' panel virtually undamaged.
You can sharpen a normal drill to do the job, as per the bought one. Keep the RPM down.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
njg02
Seriously Crusin Dubber
Posts: 145
Threads: 37
Registered: May 12th, 2005
Member Is Offline
Location: Central Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: Grateful.
|
| posted on January 24th, 2017 at 12:41 PM |
|
|
Thanks Greg. Local shop looks like they stock those.
The 'good' panel will be reused into my bug. Mine is rusted on both upper corners and so far the good one looks ok.
71 super in progress.
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on January 24th, 2017 at 05:23 PM |
|
|
I've used them and find the 8mm is better at fully releasing the spot weld. With the 6mm it doesn't always get the entire weld especially as VW
seemed to use an oval or oblong spot weld head on some joins. Rear apron was round spots but heater channel was oblong. Hence the 8mm was enough to
cover all the oblong weld 
I also bought 5 cobalt off of Ebay. 6 years later and still work fine. Think I've sharpened 2 of the 8mm so far in that time.
madness is in the eye of the beholder  |
|
|
