| [ Total Views: 2971 | Total Replies: 8 | Thread Id: 112926 ] |
|
|
 yasdnil01
Seriously Crusin Dubber
Posts: 135
Threads: 33
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Orange
|
| posted on November 13th, 2017 at 06:35 AM |
|
|
Looking for an old FAG.....002 main shaft bearing
Howdy
I'm chasing after a 002 trans main shaft bearing
it's the bearing thats under the gear shift housing held in place by a c clip
The one i have is all rusted up solid
Just wanted to know if anyone had and old used one that still spins ok, it's only for a off road engine test trans so wont need to be all that good
of condition
OD is 66mm.
ID is 28mm
Width of the outer race is 14.5mm
Width of the inner race is 18mm.
The inner race is equally centred on the outer race.
The FAG bearing number is 524737D
The VW part number was 002-311-123A
The SKF bearing is 306189
It was used from 73 to 76 in the 002 bus trans
Cheers
|
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on November 13th, 2017 at 07:40 AM |
|
|
OLD FAG!!!!
Elderly Gay Gentleman would be more 'PC', surely. 
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
yasdnil01
Seriously Crusin Dubber
Posts: 135
Threads: 33
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Orange
|
| posted on November 13th, 2017 at 05:42 PM |
|
|
Yep....... thought i'd get a bite with that topic heading
|
|
|
yasdnil01
Seriously Crusin Dubber
Posts: 135
Threads: 33
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Orange
|
| posted on November 16th, 2017 at 06:50 PM |
|
|
Yep....just as i suspected those old FAG bearings are made from unobtainium
Can get a cheap bearing from the US but it's made from chinesium
Have had experiences with chinesium before ......Once my new chinesium wrench broke in three places....... and i was not even using it at the time
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on November 17th, 2017 at 04:42 PM |
|
|
Have you tried Tooley Imports or Mick's Motors, it is not that long ago that I purchased a couple and Tooleys got a shipment of parts recently.
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on November 18th, 2017 at 10:44 AM |
|
|
I am sure that I am able to help (but it will be a new bearing), I will check my stock and get back to you on Monday.
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12780
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on November 18th, 2017 at 10:53 AM |
|
|
| Quote: | Originally
posted by grumble
but it will be a new bearing.
|
So that must be a new FAG 
Well.............someone had to say it
Futue te ipsum!!!
|
|
|
grumble
Son of Jim - Creator of Good
Posts: 2671
Threads: 53
Registered: June 10th, 2008
Member Is Offline
Location: Taree
Theme: UltimaBB Pro Blue ( Default )
Mood: happy all the time
|
| posted on November 18th, 2017 at 10:55 AM |
|
|
| Quote: | Originally
posted by Bizarre
| Quote: | Originally
posted by grumble
but it will be a new bearing.
|
So that must be a new FAG
Well.............someone had to say it
|
Barry I am leaving that alone, i can get into trouble without help.
|
|
|
yasdnil01
Seriously Crusin Dubber
Posts: 135
Threads: 33
Registered: November 16th, 2008
Member Is Offline
Theme: UltimaBB Pro Orange
|
| posted on November 24th, 2017 at 11:45 AM |
|
|
Was able to purchase a 002 main bearing from Rob Penrose
So many thanks to Rob and the gang
|
|
|
