| [ Total Views: 1638 | Total Replies: 4 | Thread Id: 113838 ] |
|
|
 hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on August 14th, 2020 at 10:43 PM |
|
|
Slowing Down Rust Inside Beetle Sills
Is it worthwhile spraying any liquid inside the sills to slow down rust that can be seen on the heater channels and if so, what do I use? Cavity wax?
Deoderised fishoil? Lanolin? Anything else? Or am I wasting my time.
Cheers
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on August 15th, 2020 at 07:13 AM |
|
|
its worth doing
I would wait for a hot day then drill a hole in the back of the sill so you can flush out all the dirt n dust from the inside with water
allow to dry then spray in Cavity Wax
you have to remove all the loose stuff first other wise its just going to continue to rust
Also remove the running boards and back seat interior panels using a hacksaw black and water again flush out the rear quarter panel using the blade
up the drain holes to make sure there unblocked
The front quarter panels also hold dirt and rust make the small hole bigger in the bottom of panel n flush out with water
also using rust converter is a good idea as no paint in any of the areas
I think Wurth has good product it will smell for while but use the heaters for few days
|
|
|
bushed
Wolfsburg Elder
Posts: 3539
Threads: 66
Registered: December 18th, 2006
Member Is Offline
Location: Lowood Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on August 15th, 2020 at 09:52 AM |
|
|
early bugs were dipped in a gal type primer ? meaning inside of channels etc and not sure if aussie ones were from ( ca 1960!) So yes, drilling holes
also the size of a good rubber drain plug will be good. then fit it -
the ones where water gets out but not easily in..(funnel shape...)
want any vw bits old but like me, Made in Germany!!!
|
|
|
MR930
Wolfsburg Wizard
Posts: 665
Threads: 73
Registered: August 27th, 2002
Member Is Offline
Location: Nabiac. NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: VW crazy.
|
| posted on August 19th, 2020 at 05:53 PM |
|
|
We sell a lot of techtyl to car resto customers. Some mix it with fish oil too.
|
|
|
hulbyw
Insano Dub Head
Posts: 804
Threads: 131
Registered: September 28th, 2009
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: I'm OK, RU?
|
| posted on August 22nd, 2020 at 02:11 PM |
|
|
Thanks folks. Once the weather warms up (10 degrees in Melbourne atm) I will get some wax and give it a go.
Cheers
|
|
|
