| [ Total Views: 601 | Total Replies: 10 | Thread Id: 19108 ] |
|
|
 blutopless2
Veteran Volks Folk
DAMSLO
Posts: 2457
Threads: 187
Registered: January 8th, 2004
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue
|
| posted on February 17th, 2004 at 07:18 AM |
|
|
electronic ignition
does anyone have any info on whether electronic ignition is available for early beetles??? and installation details etc??
see.... air and water do mix 
1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro |
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12780
Threads: 734
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 17th, 2004 at 07:27 AM |
|
|
What distributor are you running????
Basically the answer is yes
Cheapest is a Magfire - a bit over $100, maybe $120
You take out you points and coil screw in a device where the points go and slip a disc with magnets over the shaft.
Time it the same way.
Other brands include Petronics and Compufire.
Then you can go the whole hog with a Malory (sp?)
Brad did a deal on some Compufire before Christmas.
Do a search - i think there were some links to describe them
Also go to http://www.aircooled.net and look for them there
TTFN
Futue te ipsum!!!
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 17th, 2004 at 08:28 AM |
|
|
| Quote: | Originally
posted by blutopless2
does anyone have any info on whether electronic ignition is available for early beetles??? and installation details etc??
|
Electronic ignition can describe something that just replaces your points (the Compufire, Pertronix and Magfire units). The major advantage of these
is you don't have to adjust your points!
It can also describe something that enhances the spark, including transistor assisted and capacitor discharge ignitions (CDI). (Most aftermarket
systems are CDI).
To say the least, there have been major heated discussions about the merit or otherwise of these two options. Personally, I would make sure that your
existing ignition system is up to scratch before installing either electronic ignition. Both the mechanical and vacuum advance mechanisms were
sticking in my distributor. It's amazing what a difference cleaning and lubricating made! Also I got new leads, distributor cap, rotor and plugs
soon after getting my kombi because the ones on the engine were an unknown quantity.
|
|
|
blutopless2
Veteran Volks Folk
DAMSLO
Posts: 2457
Threads: 187
Registered: January 8th, 2004
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue
|
| posted on February 17th, 2004 at 08:53 AM |
|
|
i am thinking of starting off by replacing all the spark plugs, the leads, rotor, points, distributor cap and coil as a start to ensure i have
everything new for the first start up of my beetle. was thinking of going electronic at a later date as i was lead to believe that electronic was
much better as the voltage discharged to the spark plug is much higher than the points ignition, but am not really up to scratch with ignition etc. i
have a 6v bug so would i have to go 12v to use electronic???
see.... air and water do mix
1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on February 17th, 2004 at 09:49 AM |
|
|
a 12 VOLT High Ignition System...
Thats what I was waiting for .... I know of NO electronic ignitions for 6 VOLT Cars... ALL 12 Volts as they were NOT in use back in the early
50s... when 6v was common.... I am going to use a High Energy ignition system [ a dick smiths kit] which has been upgraded over the years,the last
upgrade in 1998. NOT CDI..
All You disconnect is the condenser, so if You do have a problem, just reconnect the condenser and away You go.. This system puts a VERY Small amount
of current thru the points so only the rubbing block will wear... and then puts out a VERY high Voltage to the coil, which increases the High Voltage
going to the spark plugs.
I had to buy a standard ignition coil, as the GT40 coil puts out too much high voltage. Not having to change the points all the time will be great..
So, I fully recommend any electronic ignition system.
It has to be better than checking & changing points all the time... You may even get a small increase in power, and better fuel economy...
Lee
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
blutopless2
Veteran Volks Folk
DAMSLO
Posts: 2457
Threads: 187
Registered: January 8th, 2004
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue
|
| posted on February 17th, 2004 at 10:35 AM |
|
|
thanks for the advice.... 
see.... air and water do mix
1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro |
|
|
modulus
A.k.a.: Peter Hill
Veteran Volks Folk
Posts: 2009
Threads: 76
Registered: July 1st, 2003
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro White
Mood: modular
|
| posted on February 17th, 2004 at 11:15 AM |
|
|
| Quote: | Originally
posted by blutopless2
i am thinking of starting off by replacing all the spark plugs, the leads, rotor, points, distributor cap and coil ...
|
A very good idea, before going further.
Volkspower had a forum discount going which offered plugs, leads, points, cap, condenser, oil, filters etc. for ~$100; worth giving them a call...
|
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 17th, 2004 at 02:21 PM |
|
|
There IS a 6 volt electronic ignition. See here for details.
|
|
|
blutopless2
Veteran Volks Folk
DAMSLO
Posts: 2457
Threads: 187
Registered: January 8th, 2004
Member Is Offline
Location: melbourne
Theme: UltimaBB Pro Blue
|
| posted on February 17th, 2004 at 03:02 PM |
|
|
thanks... will have a squiz :thumb
see.... air and water do mix
1974 1300
1997 MK3 Golf GL
2003 NB Cabrio
2012 Golf VI GTI
2014 Audi A4 Quattro |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on February 17th, 2004 at 09:22 PM |
|
|
Have a squiz at what....
I didn't see anything....
Has it been deleted????
You could use a 6v to 12 volt inverter for a 12v electronic ignition...
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
lugnuts
A.k.a.: Mike
Custom Title Time!
Posts: 1070
Threads: 88
Registered: August 28th, 2002
Member Is Offline
Location: Sydney,Castle Hill
Theme: UltimaBB Pro Blue ( Default )
Mood: semi-retiring
|
| posted on February 18th, 2004 at 01:35 AM |
|
|
here :P |
|
|
mnsKmobi
Wolfsburg Wizard
Posts: 589
Threads: 27
Registered: August 27th, 2002
Member Is Offline
Location: Melbourne
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 18th, 2004 at 08:04 AM |
|
|
Try this...
http://www.aircooled.net/new-bin/viewproductdetail.php?keyword2=IGN0002&cartid=0211200442664448
|
|
|
Peter Leonard
Super Moderator
Volatile
Posts: 1456
Threads: 52
Registered: April 18th, 2003
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: shiny
|
| posted on February 18th, 2004 at 11:26 PM |
|
|
gyahhh
lol lugnuts
mebbe a bit tricky For Some, mns kombi.
downside of the lower current passing thru the points, is they cease to 'self-clean' ie little hazy oily deposits can stop you dead, or make
you think something is horribly wrong. easily fixed tho, wipe between the points with something non- greasy and very slightly abrasive, like plain
paper. so all you have to do as maintenance is that, and adjust the gap every few thousand miles as the rubbing block wears
:thumb
let sleeping dubs lie
|
|
|
