| [ Total Views: 780 | Total Replies: 19 | Thread Id: 3711 ] |
|
|
 70giorgias
Casual Dubber
Posts: 45
Threads: 5
Registered: February 6th, 2003
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: stirred, never
|
| posted on February 12th, 2003 at 06:04 PM |
|
|
i tried to do it as well. i have small hands and i can't reach 1 and 3 either - they are behing the vents. i was told you have to drop the
engine. i left 1 and 3 to the mechanic, giving up after 2 hours plus it was raining...:jesus DON'T CUT THE HOLES!! the last thing a beetle needs
is more holes!!!:cry
[Edited on 12-2-2003 by 70giorgias]
|
|
|
Woozy
Seriously Crusin Dubber
Posts: 118
Threads: 13
Registered: December 4th, 2002
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: Wahoooooooo!!!!
|
| posted on February 12th, 2003 at 06:07 PM |
|
|
My borthers car was going to have that problem with his 40mm webbers. we cut holes aprox 50mm diameter in the sides at the right spot's then made
up plates from some scrap to cover the holes.(we did this before we put the engine in)
If you are carefull with a good holesaw i dont think there is anything in the way to stop you from doing this with the engine in (just make sure you
clean around the plug's well before you pull them)
Other than that you could always pull the engine and fix up some holes then put it back. but you need a bit more gear to do that.
:vader
Everyone needs something to belive in !
I belive i shall have a beer !
|
|
|
Baja Wes
Bishop of Volkswagenism
V6 Baja Pioneer
Posts: 3119
Threads: 94
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: Content
|
| posted on February 12th, 2003 at 07:49 PM |
|
|
I had holes cut in my L bug. I cut them with the engine out with a jig saw. Cut them a generous size. The I covered the edges with C section rubber so
I didn't cut my hands. I never bothered covering the holes and didn't notice any negative effects.
|
|
|
Woozy
Seriously Crusin Dubber
Posts: 118
Threads: 13
Registered: December 4th, 2002
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: Wahoooooooo!!!!
|
| posted on February 12th, 2003 at 08:30 PM |
|
|
Another thought .........
I have seen a tool which is a socket ratchet but you can also twist the handle to turn the end.
I think its called a virgin wrench (god knows why ?) you might be able to get on of those on with a universal joint in there somewhere
:bounce:bounce:bounce:bounce:bounce:bounce:bounce:bounce:bounce
Everyone needs something to belive in !
I belive i shall have a beer !
|
|
|
Menangler
A.k.a.: Dave Becker
Custom Title Time!
Posts: 1991
Threads: 309
Registered: August 26th, 2002
Member Is Offline
Location: South Coast NSW
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 12th, 2003 at 08:53 PM |
|
|
If you don't want to cut holes,Why not just remove the carbs?, you don't need to remove the engine to get plugs out, how do you think you
get plugs out on a stocker? It isn't that hard.
FAHRVERGNUGEN;
Description of a pleasurable sensation,
Experienced when a car and it's driver are in mutual harmony, A unique driving experience, Pleasure, Satisfaction,
A feeling experienced by Volkswagen Drivers.
 |
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on February 12th, 2003 at 09:08 PM |
|
|
Yeah, if you don't want to cut the holes, just remove the carbies, you'd have to take them off to remove the engine anyway.
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 13th, 2003 at 05:00 PM |
|
|
Banana you should be used to getting into tight places you do work on Aircraft dont you ???
TIP of the WEEK get a piece of vaccuum or fuel hose about 1/2 inch stuff about 4 or 5 inches long.
Once you crack the plug push the tube over the ceramic and unscrew it which will save you dropping in down the hole or loosing it some place else.
when installing new plugs do the same you should be able to screw it in all the way and only tighten it a small amount with your plug socket.
but if al else fails holes are good... make it big enough to do both plugs at the same time probally about 6 by 8 inches or so
then make a new cover plate that over laps by say 1/2 inch all around and screw it on to cover the hole when not in use...
:beer:beer:beer:beer:beer:beer:beer
|
|
|
vwrallycar
A.k.a.: Andrew Rankin
Insano Dub Head
Posts: 721
Threads: 83
Registered: September 2nd, 2002
Member Is Offline
Location: Rockhampton, Queensland
Theme: UltimaBB Pro Black
|
| posted on February 13th, 2003 at 07:55 PM |
|
|
i have twin kadrons on my motor and dont have any trouble changing plugs.
all u need is a 1/2" drive rachet, plug socket and maybe a short extension.
can be a little tight but easily done
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 14th, 2003 at 07:01 AM |
|
|
Banana what year did you do your apprenticeship.
Did you start at QF in Sydney ???
I started QF in 1971 class 26D
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 14th, 2003 at 09:21 AM |
|
|
yeah i think ive done about 9 or 10 " D " checks on VWs over the past 35 years.
done many a A, B, n some Cs as well.
I seem to get a new one every few years n want to pull it apart.
|
|
|
555bug
Custom Title Time!
WRX Bug Boy
Posts: 1123
Threads: 79
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Vintage
Mood: turbo charged
|
| posted on February 14th, 2003 at 10:39 AM |
|
|
sorry I'm a little late to this thread but you should get yourself a wobbler extension and a 3/4 mini rachet. You will then ne able to get them
out no sweat. |
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on February 17th, 2003 at 05:17 AM |
|
|
There are many beetles out there with large holes cut in the sides to get at the spark plug and Carbies....
When You do replace the Spark Plugs, I would be using those expensive long lasting ones....
I also read in one of My Many VW owners & workshop manuals that Antiseize is recommended to be put on the thread of spark plugs because of the
difference in Metals.
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
amazer
Bishop of Volkswagenism
kombi pilot
Posts: 3187
Threads: 308
Registered: August 26th, 2002
Member Is Offline
Location: Wollongong
Theme: UltimaBB Pro Blue ( Default )
Mood: Peachy!
|
| posted on February 17th, 2003 at 09:15 AM |
|
|
OK OK I have to ask. what are a, b, c and d checks?
Chris.... kombi pilot, oval dreamer... finisher #26971 2005 city to surf
|
|
|
vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on February 17th, 2003 at 09:24 AM |
|
|
AIRCRAFT TALK Fraz
they refer to the hours between servicing intervals,
From Memory A is 100 hours
D check is like major surgery the entire A/C is gutted... and looks like a tube when empty.
Banana man may be able to advise the other hour intervals.
|
|
|
555bug
Custom Title Time!
WRX Bug Boy
Posts: 1123
Threads: 79
Registered: August 26th, 2002
Member Is Offline
Location: Brisbane
Theme: UltimaBB Vintage
Mood: turbo charged
|
| posted on February 18th, 2003 at 01:43 AM |
|
|
cool bananaman always keen for a bit of bench racing  |
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on February 18th, 2003 at 11:29 PM |
|
|
Hi
I used to tune & service modified VWS for a job, I would have to say that for the end result Kadrons present the most problems. I used a Champion
plug socket, these a have a 21 mm hex head on them, so you fit the socket to the plug and then use a 21 mm open ender cut down to suit to turn the
plug socket, you usually only need to turn it about 1/2 a turn with the spanner then it should be hand tight. I also have a Hazet extenable spark plug
socket that works great. Where I used to work when we fitted IDAs we cut a small hole for 1 & 3 cylinders only. When the motor was being fitted
and before the carbs were fitted we drilled the holes, they were only the size of the plug socket. and could easliy be covered with a grommet.
1302Steve
|
|
|
