| [ Total Views: 735 | Total Replies: 8 | Thread Id: 37326 ] |
|
|
 frenzix
Son of Jim - Creator of Good
Posts: 2742
Threads: 195
Registered: December 8th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 7th, 2005 at 07:21 PM |
|
|
splitty floor repairs
Hi peoples,
About to cutout the floor of my 65 panel van, never done it before.. what problems did you come across, and any tips?
Cheers, Tim
|
|
|
david
Custom Title Time!
Posts: 1013
Threads: 157
Registered: November 25th, 2002
Member Is Offline
Location: albury-wodonga
Theme: UltimaBB Pro Blue ( Default )
Mood: amicable
|
| posted on April 7th, 2005 at 08:05 PM |
|
|
GET A SPOT WELD REMOVING DRILL BIT
|
|
|
t2
Custom Title Time!
stop taking life so serious
Posts: 1102
Threads: 206
Registered: March 11th, 2004
Member Is Offline
Location: penrith
Theme: UltimaBB Pro Blue ( Default )
Mood: tired
|
| posted on April 7th, 2005 at 08:08 PM |
|
|
i agree , i did mine with a grinder dont recomend doing that a drill designed for drilling out these welds would be ideal
gravity wont get you high
|
|
|
byronbus
Compulsive Aussie Vee Dubber
dsk
Posts: 4204
Threads: 119
Registered: July 16th, 2003
Member Is Offline
Location: Byron Bay
Theme: UltimaBB Pro Blue ( Default )
Mood: dsk founder
|
| posted on April 7th, 2005 at 08:08 PM |
|
|
I got one
|
|
|
byronbus
Compulsive Aussie Vee Dubber
dsk
Posts: 4204
Threads: 119
Registered: July 16th, 2003
Member Is Offline
Location: Byron Bay
Theme: UltimaBB Pro Blue ( Default )
Mood: dsk founder
|
| posted on April 7th, 2005 at 08:09 PM |
|
|
How do you find the spot welds on the actual floor section? Easy on the edge...
|
|
|
nicko
Officially Full-On Dubber
Posts: 389
Threads: 77
Registered: March 18th, 2003
Member Is Offline
Location: Mid North Coast(Blackhead)
Theme: UltimaBB Pro Blue ( Default )
Mood: Tired
|
| posted on April 8th, 2005 at 02:18 PM |
|
|
I have seen pictures on http://www.metwiz.com in the archives and he usually cuts the
floor either side of the I beams or top hats and then air chissels the bits off the I beams or drills the spot welds out. Is your floor really that
bad? If you do cut it out I would be interested in some of the off cuts. Got any photos
Nicko
|
|
|
frenzix
Son of Jim - Creator of Good
Posts: 2742
Threads: 195
Registered: December 8th, 2003
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 8th, 2005 at 05:32 PM |
|
|
the floor is all rat shite, seriously you wont want any!!
|
|
|
byronbus
Compulsive Aussie Vee Dubber
dsk
Posts: 4204
Threads: 119
Registered: July 16th, 2003
Member Is Offline
Location: Byron Bay
Theme: UltimaBB Pro Blue ( Default )
Mood: dsk founder
|
| posted on April 8th, 2005 at 05:51 PM |
|
|
do you need rust filings?
|
|
|
splitbusaustralia
Wolfsburg Wizard
Posts: 487
Threads: 65
Registered: August 27th, 2002
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on April 12th, 2005 at 04:10 PM |
|
|
There's two sorts of sections under a cargo floor
I beam sections and 'top hat' sections - have a look
you can see what I mean... the spot welds are very tough
- not yer pop apart type...
You can air chisel the floor off the I beam sections
OK, but you're better drilling out the spot welds on
the top hat sections - air chiseling just chops em up big time...
I would do another run of cargo floor repair panels if there
was enough interest. Need to do 30 pieces to make a run worthwhile (and I think Roy at ClassicVW (Pacific) is
also importing the LHD brazilian cargo floors....)
regards
RobK
[Edited on 12-4-2005 by splitbusaustralia]
|
|
|
