Posts: 82
Threads: 15
Registered: March 8th, 2005
Member Is Offline
Location: Sydney,Australia
Theme: UltimaBB Pro Blue ( Default )
posted on May 28th, 2005 at 01:29 PM
Another door question
Hey,
I have another stupid door question.
How do i remove the front Qaurter window on the door?
It has like little stud rivett type things holding the swingy thing on but theres no screws or anything?
Also there is a metal bar type thing on the inside of the door around the qaurter window anyone know how to get this out as i have the chrome trim
stuck in it that i can get out. And it looks like a pain in the butt when it comes time to put the seals and trim back on?
Cheers,
Scott
toplessbug
Fahrvergnugen
Posts: 879
Threads: 128
Registered: August 27th, 2002
Member Is Offline
Location: Brisvegas QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: waiting for my lotto win
posted on May 29th, 2005 at 09:06 AM
welcome to the wonderful world of t1 doors they are the biggest pain in the arse you will ever find .. to get the 1/4 vent out
pull back the upper glass run channel near the 1/4 vent and there is a screw remove it then inside the door there is a bolt that goes into the
vertical bar for the 1/4 vent remove it then remove the window buy first removing the lower rear glass channel, 1 bolt at the bottom, then pull down,
then grab the top of the vent window and pull to the rear at the top only as it comes back slide the rest of it up and out it comes from there
reassembly is retracing your steps but to replace the scrapers is really difficult as the ones you buy now have shit clips that break as soon as you
touch them so you have to take out you original ones and use them
