| [ Total Views: 1226 | Total Replies: 5 | Thread Id: 44071 ] |
|
|
 radioactive_ben
Commited Dubber
Posts: 55
Threads: 28
Registered: July 27th, 2005
Member Is Offline
Location: Brisbane, Queensland
Theme: UltimaBB Pro Blue ( Default )
Mood: So Confused...
|
 posted on September 21st, 2005 at 09:14 PM |
|
|
Modifying my Vw
Gday
I have a 1968 Vw 1300 beetle and i am doing it up and i was just wondering how do you lower these vws is it just a matter of changing shocks or
what??
:bounce
Thanx
|
|
|
 Bizarre
Super Moderator
The artist formerly known as blue74l
Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline
Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 21st, 2005 at 09:21 PM |
|
|
If you have a 68 then it "should" be a beam and ball joint front end (unless it is a Suth Efrican import)
There are 2 ways you can go
I have just been through this with a friend. Do a search with my name and narrowed beam.
Pick what wheels you want first as this will effect the out come.
Dropped spindles will widen the track.
Wide wheels may require a narrowed beam if the wheel offset is wrong.
You can run both adjustable beam and dropped spindles for super low, but handling will suffer.
Another friend has a ball joint beam with 195 x 50 series on 6" V Force Spyders and that sits LOW.
Futue te ipsum!!!
|
|
|
Dasdubber
A.k.a.: Alan Agyik
23 Windows of Awesome
DAS Resto Haus
Posts: 5746
Threads: 289
Registered: August 26th, 2002
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue
Mood: feeling fine...
|
| posted on September 21st, 2005 at 09:30 PM |
|
|
Typically lowering a beam equipped beetle (link pin or ball joint) involves having the centre cut out and adjusters welded in (different types but
sway-a-way are the most common). You can just cut and turn the centre to narrow it, but not worth it as if you get the angle wrong you got to cut it
again. You need to ensure a qualified/experienced welder does the work though.
You can keep your beam stock width if you run the same wheels, or may have to narrow it with wide wheels (eg. I run 17x7.5in and had to narrow it 80mm
which created other issues - none of which can't be solved).
|
|
|
lugnuts
A.k.a.: Mike
Custom Title Time!
Posts: 1070
Threads: 88
Registered: August 28th, 2002
Member Is Offline
Location: Sydney,Castle Hill
Theme: UltimaBB Pro Blue ( Default )
Mood: semi-retiring
|
| posted on September 22nd, 2005 at 03:47 AM |
|
|
http://www.cbperformance.com/catalog.asp?ProductID=478
and or http://www.cbperformance.com/catalog.asp?ProductID=428 :thumbnn[ Edited on 21-9-2005 by lugnuts ] |
|
|
subibaja
Wolfsburg Wizard
Posts: 501
Threads: 45
Registered: September 4th, 2005
Member Is Offline
Location: Brisbane, QLD
Theme: XMBX Pro Green
|
| posted on October 1st, 2005 at 09:40 PM |
|
|
custom off road 33564356
has a lowered beam fo $295 exchange
then when you put that in all you have to do is reset your rear a bit lower then hey its low and go
anyone who says it's bad to put subaru motors in vw's.....
hasnt got a clue about smoooooooooth
terry
brisbane
0403252522
you know who i am
|
|
|
76bug
Officially Full-On Dubber
Posts: 215
Threads: 20
Registered: February 24th, 2005
Member Is Offline
Location: canberra
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 12th, 2005 at 09:57 AM |
|
|
i bought the geneberge avis adjusters, i was told these r a far better wat to go than the ones where u have to cut the beam, they were pretty
expensive wen i bought them a few years ago, but u could probably get them for less than 3 hundred now
|
|
|
