Board Logo
Go To Bottom

Printable Version  
[ Total Views: 531 | Total Replies: 8 | Thread Id: 47513 ]
Author: Subject:  adding a starter switch to a type3?
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 02:33 PM
adding a starter switch to a type3?


ok, i had this odne to my kombi whilst i was travelling, as the key needed to be turned right to the end and jiggled to engage the starter motor. now i want to do the same thing to my type3 for the same reason. anybody knwo which wire to cut and move to the switch and which to splice back into? i assume it is an earth switch, in which case i would assume it is the black wire that i should be splicing back into, but what colour is the starter wire? i dont think its the red one like the manual says as that seems to provide all the power up front. which one is it?



Reimagined/Recycled/Upcycled Cool
MemberDIY-DUB
Custom Title Time!
*****


No Avatar


Posts: 1591
Threads: 288
Registered: April 4th, 2004
Member Is Offline

Location: Ipswich
Theme: UltimaBB Pro Blue ( Default )

posted on January 3rd, 2006 at 02:40 PM



look at the wires on the starter itself, trace back to where you want the switch, theres a big fat red one, an big fat black one then another, thats the one you want i think...



http://i31.photobucket.com/albums/c384/GT-1302/Fukenbroken.jpg
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 02:48 PM



cool, mine is sheathed at the starter so i cant tell.
so you think other wire to switch then switch to ground?




Reimagined/Recycled/Upcycled Cool
Super Administratorhelbus
A.k.a.: Pete S
Super Administrator
Mad fabricator, paint and body
*********

Rank Avatar

Avatar


Posts: 7386
Threads: 312
Registered: September 1st, 2002
Member Is Offline

Location: In the garage chopping cars into bits
Theme: UltimaBB Pro Blue
Mood: In the thinking chair

posted on January 3rd, 2006 at 02:58 PM



If you have a test light, and the key switch is still just working. poke the test light into wires one at a time until one lights up the test light at the same time the crank starts.

Then run a wire from IGN power on to the button and the button to the wire you located with the test light. That's how the two buses we have owned I did.




MemberDIY-DUB
Custom Title Time!
*****


No Avatar


Posts: 1591
Threads: 288
Registered: April 4th, 2004
Member Is Offline

Location: Ipswich
Theme: UltimaBB Pro Blue ( Default )

posted on January 3rd, 2006 at 03:01 PM



other wire to the switch then big fat red one, leave the ground where it is, doing it that way got mine to turn over, carful of sparks if anything touches it tho, almost started a fire when i first did it:tu:



http://i31.photobucket.com/albums/c384/GT-1302/Fukenbroken.jpg
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 03:05 PM



hehe, no worries about starting fires, i am well practiced at electrocuting myself.



Reimagined/Recycled/Upcycled Cool
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 03:11 PM



definitely not the other thick one (black with yellow stripe) will have to try to find my test light and go over the other wires.



Reimagined/Recycled/Upcycled Cool
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 03:51 PM



ah ha. wire was hidden away from the others. found and fitted, woohoo, one less problem to worry about.



Reimagined/Recycled/Upcycled Cool
Memberbaybuscamperkid
Compulsive Aussie Vee Dubber
prince of insufficient light, ruler of heck
*******


Avatar


Posts: 4316
Threads: 335
Registered: August 25th, 2002
Member Is Offline

Location: Victoria
Theme: UltimaBB Pro Blue ( Default )
Mood: transported

posted on January 3rd, 2006 at 03:51 PM



thanks guys



Reimagined/Recycled/Upcycled Cool


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.5% - SQL: 97.5% ]