Board Logo
Home Home  Frequently Asked Questions FAQ  View Topic Activity Topic Activity  Forum Stats Stats  Contact Us Contact Us  Banners Banners
Last active: Never Not logged in [ Log In - Register ]
Aussieveedubbers Go To Bottom

Printable Version  
[ Total Views: 1257 | Total Replies: -3 | Thread Id: 594 ]
« View Previous Thread View Next Thread »
Author: Subject: 
Member70AutoStik
Insano Dub Head
****

Avatar


Posts: 730
Threads: 18
Registered: August 30th, 2002
Member Is Offline

Location: Dandenong. Victoria
Theme: UltimaBB Pro Blue ( Default )

posted on September 15th, 2002 at 02:44 AM


Yes, it's possible to bore them out. But, it would only useful on an engine designed for racing, in which case it would be wiser to get a larger carb anyway. The venturi accelerates the air at it's narrowest point, when it widens again this creates the vacuum which sucks the fuel out of the nozzle. So, boring out the venturi will stop the carb working at lower revs; not much use for the applications type 3 carbs would be used for (i.e. street,) is it? :)


 Aussieveedubbers   Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group


[ Queries: 40 ] [ PHP: 2.4% - SQL: 97.6% ]