Board Logo
Go To Bottom

Printable Version  
[ Total Views: 688 | Total Replies: 5 | Thread Id: 61374 ]
Author: Subject:  Running different size rims front/rear!
MemberBaldy
Learner Dubber
*


Avatar


Posts: 13
Threads: 7
Registered: October 19th, 2006
Member Is Offline

Location: Sydney (Eastern Suburbs)
Theme: UltimaBB Pro Blue ( Default )
Mood: Good - most of the time!

posted on March 26th, 2007 at 01:20 PM
Running different size rims front/rear!


Hi,

Question specific to 1971 SuperBug.

Is there any benefit of running different size rims front and back?

I was looking at running 15" x 5" on the front with 185/60s and
15" x 6" on the rear with either 195/60s or 205/60s

Or would I be best just to run 15" x 5" all round?

I would appreciate some feed back/ thoughts on this.

Regards
Baldy.
Membergreedy53
Bishop of Volkswagenism
******


Avatar


Posts: 3062
Threads: 468
Registered: March 4th, 2006
Member Is Offline

Location: camden nsw 2570
Theme: UltimaBB Pro Grey
Mood: strung out

posted on March 26th, 2007 at 03:54 PM



bit bigger on the back with the motor back there is a good idea for grip if you are running a bigger donk there is a lot of extra weidht back there with the motor riding on the back tyers just my opinion



:yes::yes::lol::no::ninja::grind::dork:
MemberVWCOOL
23 Windows of Awesome
********


No Avatar


Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline

Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help

posted on March 26th, 2007 at 04:28 PM



No problem with that in fact I reckon it would be ideal for a road car. Supers aren't real accepting of a 6-inch rim at the front. Make sure you get the offsets right, too

[ Edited on 27-3-2007 by VWCOOL ]




Pay your debts, CxxT
Membermodulus
A.k.a.: Peter Hill
Veteran Volks Folk
*****


Avatar


Posts: 2009
Threads: 76
Registered: July 1st, 2003
Member Is Offline

Location: Melbourne
Theme: UltimaBB Pro White
Mood: modular

posted on March 26th, 2007 at 05:01 PM



It rather depends what you want out of the car. For a road car, even a fast road car, the benefit you get out of larger rear tyres and 1" extra width will likely be negated by the additional unsprung weight. Additional unsprung weight is a really bad deal on a road car that has to deal with variable surfaces, and it works your shocks much harder. You would get better value for your dollar with the 5" and a good, high-performance tyre (think e.g. Falken); the front/rear balance can be tuned with anti-roll bars and fine-tuned with tyre pressures. And you'll have a spare that fits.

Just my 2 cents.

hth

[ Edited on 26-3-07 by modulus ]




Peter Hill
1975 Type 2 Double Cab
modulus.com.au
MemberVWCOOL
23 Windows of Awesome
********


No Avatar


Posts: 5158
Threads: 235
Registered: June 19th, 2003
Member Is Offline

Location: In the shed... Lake Macquarie NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: happy to help

posted on March 27th, 2007 at 03:11 PM



Quote:
Originally posted by modulus
It rather depends what you want out of the car. For a road car, even a fast road car, the benefit you get out of larger rear tyres and 1" extra width will likely be negated by the additional unsprung weight. Additional unsprung weight is a really bad deal on a road car that has to deal with variable surfaces, and it works your shocks much harder. You would get better value for your dollar with the 5" and a good, high-performance tyre (think e.g. Falken); the front/rear balance can be tuned with anti-roll bars and fine-tuned with tyre pressures. And you'll have a spare that fits.

Just my 2 cents.

hth

[ Edited on 26-3-07 by modulus ]


A few extra hundred grams each side won't make much difference to unsprung with an 8kg rim on the street... But two extra inches footprint will.




Pay your debts, CxxT
Membershaihulud
Custom Title Time!
*****


No Avatar


Posts: 1448
Threads: 197
Registered: November 4th, 2005
Member Is Offline

Location: Perth
Theme: UltimaBB Pro Blue ( Default )

posted on March 28th, 2007 at 12:57 PM



Until recently my 1968 Baja had 15 x 4 1/2 running 165 x 80 profiles on the front and 15 x 7 running 9.50 LTs on the rear. It did not run well on the street. The front with stock wheels was OK, but the rear tyres were too hard, even at low pressures. It was set up for off road where that was a good combination.

I now have 15 x 6 all round with the inner rim of the new wheels in the stock position, the outer rim 2" out and the centres 1" out giving a 2" wider track from stock, both front and rear.

The front tyres are 195 x 65 and the rears are 215 x 65, the maximum legal difference.

The car goes well on the road. I have just come back from a trip to the SW of WA and the car ran very nicely with good road holding and castor on the straights. The car also has a very good looking stance. It's a good combination. I like it.

I hope that this is helpful.


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 2.2% - SQL: 97.8% ]