| [ Total Views: 576 | Total Replies: 4 | Thread Id: 62345 ] |
|
|
 REDKG
Officially Full-On Dubber
Posts: 327
Threads: 76
Registered: August 29th, 2002
Member Is Offline
Location: sutherland-sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 7th, 2007 at 02:19 PM |
|
|
oil press relief valve removal
on my T1 engine both the oil pressure relief and control valve pistons are jammed. any suggestions on how to remove them?(explains why the oil cooler
is now leaking).
|
|
|
MickH
A.k.a.: Michael Hutchinson
Bishop of Volkswagenism
Hairy Gutted Sloth
Posts: 3389
Threads: 29
Registered: September 6th, 2003
Member Is Offline
Location: TownsvilleTropical North QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: Grow a brain...walls don't hit back...
|
| posted on May 7th, 2007 at 02:55 PM |
|
|
10 mm tap screwed into it and pull valve out...
tssnq.com.au
|
|
|
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
|
| posted on May 7th, 2007 at 11:11 PM |
|
|
Hi
I did see a special tool to do this once, it fitted into the underside of the valve, then you expanded it. The tap will work, but it can be a pain
getting the tap to grip as the valve will spin in the case.
Steve
|
|
|
REDKG
Officially Full-On Dubber
Posts: 327
Threads: 76
Registered: August 29th, 2002
Member Is Offline
Location: sutherland-sydney
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 8th, 2007 at 06:55 PM |
|
|
used a 12mm tap on one valve , finally came out, the other is still tight and slightly larger than 12mm. even ran the engine with the springs removed
and they didnt bugde.enough oil pressure to burst a new oli cooler but not to move the valve.
|
|
|
 vw54
Super Administrator
Always Waiting 4 Friday
Posts: 16723
Threads: 378
Registered: August 26th, 2002
Member Is Offline
Location: Sunny Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Oval resto ongoing
|
| posted on May 9th, 2007 at 07:28 AM |
|
|
you can usea flat blade screw driver as well
jam it in n turn to break the piston loose
|
|
|
