| [ Total Views: 1051 | Total Replies: 4 | Thread Id: 63466 ] |
|
|
 jonnyb
Seriously Crusin Dubber
Posts: 138
Threads: 28
Registered: October 6th, 2003
Member Is Offline
Location: Colebrook TAS
Theme: UltimaBB Pro Blue ( Default )
Mood: level: Still Handsome
|
| posted on June 30th, 2007 at 04:52 PM |
|
|
clutch fitting problem
the throwout bearing tube in a kombi gear box-can it be not used as it is hitting the pressure plate on fitting the motor.
pressure plate is a kennedy stage 4 thing which worked well in
the wagon.-motor is rotary if that helps.appreciate any help.
john
|
|
|
The Bigfella
Officially Full-On Dubber
Posts: 284
Threads: 16
Registered: September 9th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Lotsa German cars, 1 Brit, 1 Rice
|
| posted on October 1st, 2007 at 03:41 PM |
|
|
Bump ...
I've got the same problem. I'm finishing off an old project I got diverted from 10 years back.
SSP Box with Quaife diff. KEP 2300lb pressure plate. Pressure plate hits the tube. I started cutting the tube back (I've got a spare) - but gave up
and just have the standard pressure plate and clutch in while I get it running and painted, etc. The inner dimension of the KEP pressure plate seems
to be the problem - its smaller than standard.
What's the go?
|
|
|
gazman
Seriously Crusin Dubber
Posts: 101
Threads: 7
Registered: June 19th, 2007
Member Is Offline
Location: Perth
Theme: UltimaBB Pro Blue ( Default )
Mood: hypo
|
| posted on October 1st, 2007 at 04:03 PM |
|
|
I think you may have the wrong pressure plate, ive had this problem when I changed motors once. I think earlier models had a different thrust bearing
setup.
Any vw clutch experts wanna weigh-in here?
|
|
|
jonnyb
Seriously Crusin Dubber
Posts: 138
Threads: 28
Registered: October 6th, 2003
Member Is Offline
Location: Colebrook TAS
Theme: UltimaBB Pro Blue ( Default )
Mood: level: Still Handsome
|
| posted on October 1st, 2007 at 08:56 PM |
|
|
dave butler helped me out with photos and advice in his reply on the 30/6/07 check it and see if it helps you
|
|
|
The Bigfella
Officially Full-On Dubber
Posts: 284
Threads: 16
Registered: September 9th, 2007
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
Mood: Lotsa German cars, 1 Brit, 1 Rice
|
| posted on October 2nd, 2007 at 08:44 AM |
|
|
Thanks Jonnyb - I found Dave's post. Mine looks a bit different, but I'll give it a go. I'll start a separate thread with pics if I strike
trouble.
|
|
|
