Posts: 215
Threads: 20
Registered: February 24th, 2005
Member Is Offline
Location: canberra
Theme: UltimaBB Pro Blue ( Default )
posted on April 16th, 2008 at 12:03 PM
front and rear sway bars
hi does anyone have any pictures or be able explain how to put a second sway bar on the front of a 71 sbug also after some pics for rear irs sway bar
setups
thanks
1303Steve
A.k.a.: Steve Carter
Scirocco Rare
Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline
Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading
posted on April 16th, 2008 at 02:13 PM
Hi
You can get a clip on bar for the front, it runs parallel to factory bar, not ideal. The best one to buy is a full replacement one from Whiteline,
they also incorporates adjustable caster, useful if you've lowered your car or want to tune your suspension.
Start off with a rear bar 1st, then go front if you need it.
Steve
vwrallycar
A.k.a.: Andrew Rankin
Insano Dub Head
Posts: 721
Threads: 83
Registered: September 2nd, 2002
Member Is Offline
Location: Rockhampton, Queensland
Theme: UltimaBB Pro Black
posted on April 17th, 2008 at 08:21 PM
i used to have 2 setup on the front of my super years ago and im going to go that way again with my current super.
now this is from memory so may not be correct but, we used the ends off of old shock absorbers, welded together and used new bushes from pedders,
these sat on the outer ends to support it. pretty sure we used the original mounts under the mounts which are there now, but spaced with longer
bolts.
works very well in my opinion and i was using this with a rear sway bar too. hope this helps
