Board Logo
Go To Bottom

Printable Version  
[ Total Views: 396 | Total Replies: 1 | Thread Id: 77902 ]
Author: Subject:  help needed with subaru adapter
Memberrod baker
Commited Dubber
**


Avatar


Posts: 54
Threads: 20
Registered: May 20th, 2009
Member Is Offline

Location: mallabula
Theme: UltimaBB Pro Blue

posted on July 20th, 2009 at 05:30 AM
help needed with subaru adapter


hi all this the flywheel that came with my adaptor kit as far as i can tell it is a modified 1600 flywheel it has been machined out to take a 228 mm clutch plate.
now if you look you can see the six holes that were for the pressure plate the new holes measure from center to center across the center at 244mm i do not know which pressure plate matches this spacing any ideas would be great the ring gear diameter is the same as a 1600 275 mm and the adapter housing is cast alloy i cant do much till can find out what pressure plate to fit.
thanks rod




1970 BAJA BUG CHEAP N FUN ALMOST NO RUST 1500 AIRCOOLED ALL STOCK AND 1973 CONVERTIBLE BAJA http://www.rodstruckentrailers.co.au 
Member1303Steve
A.k.a.: Steve Carter
Scirocco Rare
*********


Avatar


Posts: 8650
Threads: 564
Registered: August 27th, 2002
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading

posted on July 20th, 2009 at 10:21 AM



Hi

The only 228 VW clutch is from a late bay or Wasserboxer. These are interchangable. I ran a 228 on my old Wasserboxer bug and I needed to clearance the bell-housing on a late bug transmission a fair bit.

Steve


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2025 Aussieveedubbers

[ Queries: 40 ] [ PHP: 0.9% - SQL: 99.1% ]