Posts: 381
Threads: 154
Registered: August 19th, 2008
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on January 13th, 2011 at 06:55 PM
Inlet Ports
Hi Guys
You experienced head guys, what do you do with the inlet guide when porting your heads. Normally I would lob it all of level with the casting and
then do my work, But I have no idea if the old Veedub heads can handle such a short guide.
Can anyone point me in the right direction.
Thanks
dangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591
posted on January 14th, 2011 at 07:39 AM
Yeah, dont lob it off.
Work around it, but and you can shorten/taper it a little.
Better still, core it out, remove, and do your work,
then replace it with a nice tapered one
that is about 5mm shorter than the original.
You will want to cut the seats properly once the guides are replaced.
