| [ Total Views: 1920 | Total Replies: 6 | Thread Id: 88175 ] |
|
|
 ptoome
Casual Dubber
Posts: 22
Threads: 5
Registered: March 30th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on January 16th, 2011 at 06:08 PM |
|
|
KO587 - progress
Thought it was time for an update on progress with KO587.
Although my original timetable was to have this car ready for the VolkEnthusiasts Club of SA's RATEX run through the Flinders Ranges in August 2010,
this proved to be too ambitious a target. It has taken much longer than anticipated to sort the rear end (IRS had been fitted but was 100mm too wide
each side to suit balloon style off road wheels -had to rework spring plates, switch to T1 drive shafts, remount shockers etc). Then once rear was at
correct ride height had to fit adjusters to front end to bring that bag to nominal height (beam had been set even higher to match rear end). Metal
work is complete and now trying to get panels flat enough for paint - oh for the metal finishing skills of an old fashioned panel beater!. Hope to
have it all ready for primer soon. I have been speaking to Bill M & Tony B about front end repairs and will pull my front end down again and send
to Tony to have King pins redone. After seeing how well Guy S' CB performed through the Flinders in the mud, I will swap the road tyres for some nice
chunky off-road rubber
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
11CAB
Compulsive Aussie Vee Dubber
If ya got it....Baja it
Posts: 4674
Threads: 321
Registered: August 30th, 2002
Member Is Offline
Location: Brisbane Northside
Theme: UltimaBB Pro Blue
Mood: Beach'n
|
| posted on January 16th, 2011 at 08:09 PM |
|
|
Looks much better without the flares.... 
65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab
|
|
|
ptoome
Casual Dubber
Posts: 22
Threads: 5
Registered: March 30th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on February 18th, 2011 at 07:22 PM |
|
|
Yeah, looks even better with a bit of primer over the bodywork. Still finding it hard to get much time on the car. Have bought a copy of the Owner
manual and spar parts manual from CB Bill. Wow, brilliant - why didn't I know about them before I started. Will try to this weekend take front end
off again and send spindles off to have the overhauled
|
|
|
ptoome
Casual Dubber
Posts: 22
Threads: 5
Registered: March 30th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 1st, 2011 at 04:35 PM |
|
|
Hi all. I have managed a bit more time on KO587 in the last few weeks. I sent my front spindles up to Tony Bevan for overhaul and they came back
absolutely marvelous. I wold recommend that anyone tackling a CB, first check the play in the king pins and link pins and, if there is any sign of
wear, pull them off and send them to Tony so he can work his magic on them. You can find more about what Tony does with the spindles in his own post
(bevoracing). When you consider the difficulty in getting the king pin bushes for these front ends and the amount of time needed to fabricate and fit
new ones, it represents amazing value. I just left the car on jack stands for a few weeks while I removed everything, sent them to Tony & then
found a chance to refit them. The old girl is now back on her wheels again, making it easier to work on. The last couple of weekends have been spent
stripping paint form the bonnet, engine lid, cargo tray and interior. A bit more effort with the paint stripper & wire wheel and I will be ready
to prime all the body work. Then its on to spray putty & finishing bog and more sanding... Hopefully be able to get some colour on it before the
weather gets too cold again. After spending some time thinking about how and where to mount a car radio and CB, I have decided to use the "glove
box" section on the passenger side. I have made up a bracket which will hold the radios which can be mounted with a few screws inside the glove box.
I am now fabricating a new "lid" out of a spare CB instrument panel. Will have to rat some hinges from a beetle glove box and adapt them to fit. I
also dragged out the vinyl roof and curtains and set them up with the roof hoops to see what it all looks like. As I did not have the brackets for the
hoops, I fashioned some up out of some scrap steel. It looks like the side curtains I have are from a different car to the roof: the doors have a
zipper on the trailing edge, but the side curtains don't have a matching zip. Still, looks pretty cool with everything on.
|
|
|
ptoome
Casual Dubber
Posts: 22
Threads: 5
Registered: March 30th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 1st, 2011 at 04:47 PM |
|
|
KO587 - more pics
Here is KO587 from last weekend back on her wheels
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
ptoome
Casual Dubber
Posts: 22
Threads: 5
Registered: March 30th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 1st, 2011 at 04:49 PM |
|
|
KO587 - more pics 2
Here is a pic with the roof on. I will have to chase Guy (with the CB retrieved from kangaroo island) and find out where he had his new top made up so
I can take mine down and have the same done. Although this one looks OK on the surface it has a couple of big holes and all the clips are kaput
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
bevoracing
A.k.a.: Tony Beven
Officially Full-On Dubber
Posts: 326
Threads: 36
Registered: January 18th, 2009
Member Is Offline
Location: Mount Pleasant SA
Theme: UltimaBB Vintage
Mood: Leaning against the shed wall !.
|
| posted on May 1st, 2011 at 08:52 PM |
|
|
Hi Peter
Thanks for the kind words. Your machine is looking great. Good to see it coming along so nicely. Body work is tough and time consuming. Keep up
the good work.
Cheers
Tony
|
|
|
