Posts: 37
Threads: 10
Registered: March 18th, 2011
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
posted on June 3rd, 2011 at 10:28 PM
German Bug, Aussie Bug
Is there a difference between a bug that has a made in germamy plate behind the spare wheel and an Australian made one.
I've been looking at a couple of 68's and wondering if there is a difference.
Is one better quality than the other.
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
posted on June 4th, 2011 at 12:48 AM
Quote:
Originally
posted by SA Fastback
Is there a difference between a bug that has a made in germamy plate behind the spare wheel and an Australian made one.
I've been looking at a couple of 68's and wondering if there is a difference.
Is one better quality than the other.
Hi
well, most people would go for a German made car but it can be hard to tell if they were assembled in Australia using some Australian made parts like
the glass... headlamps tail lamps etc
but looking at the cars , You can't actually tell , apart from the signs on the glass... VW with a kangaroo either side..
Sekurit was the West German glass maker..
some distributors etc were Australian made too...
so, check out the 1/4 window glass and rear and side glass...
windscreens and door glass could have been changed...
:LEE Mine is a semi auto 68 Beetle fully imported..
the 1967 German beetle for North America had many one year only parts.. rear bumpers - outer door handles - 1/4 windows - Lee
68 type headlamps-
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
posted on June 6th, 2011 at 07:45 AM
Lee the 1967 German Beetle was not sold in this country so I'm not sure why you mentioned it. Aussie '67s look just like '65-'66 models.
The '68 Beetle wasn't sold in Australia until March 1968, when it replaced the old 6-volt 1300 Aussie '67 Deluxe. Initially both the manual and
semi-auto '68s were fully imported, as it took a few months to prepare the Melbourne factory for its production. All the big presses and foundry
equipment had to be removed, and the factory turned from a full-manufacture facility to an 'assembly' line. As well, the ownership changed.
Volkswagen Australasia Ltd was wound up, and replaced by a company called 'Motor Producers Ltd.' This was still owned by VW Germany, but they only
controlled the Clayton factory. National sales/distribution rights, and spare parts support, was awarded to Sydney's LNC Industries. Motor producers
could also subcontract assembly work, so Nissan signed up for its 1600 sedan to be made in the Clayton plant. Volvo sedans and Mercedes trucks were
also made in Clayton.
So while this was going on, the Aussie Deluxe '67 was wound up in March, although the Custom (standard) and County Buggy continued on until September
'68. Likewise the T1 Kombi was discontinued, and so too the Type 3. they were all replaced with fully imported German models for a few months until
CKD assembly could start. Assembly of manual '68 Beetles began at Clayton in June '68, but the semi-auto remained fully imported. Once local
assembly of '68 manual Beetles, T2 Kombis and Type 3s started, the factory began sourcing local parts like paint, tyres, batteries, upholstry and
glass. Pilkington was the local glass supplier.
Aussie '68s could still have German glass, but it's a good place to start. Also check the manufacturers plate behind the spare wheel. Chassis
numbers are no guide, as the '19y' prefix was discontinued when local manufacture ended. Aussie CKD '68s used the normal German '11y' prefix.
Otherwise, being German kits, they are pretty much identical with the German models except for the local choices of paint colours and trim.
matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
posted on June 6th, 2011 at 08:43 AM
^^^ Gold
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
posted on June 6th, 2011 at 09:13 AM
Phil, Thanks for that concise, factual, to-the-point information....without any 'waffle'! It's nice to see things like that, written by someone who
knows what he's talking about.
I'd rather wear a Beetle out by racing it than by polishing it!
Phil74Camper
Son of Jim - Creator of Good
Head in the Clouds
Posts: 2703
Threads: 193
Registered: August 28th, 2002
Member Is Offline
Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
posted on June 7th, 2011 at 08:55 AM
Thanks guys, I'm not on the forum much any more, too busy with the club magazine (lots of Aussie VW history articles). Download all the back issues
for free (select the year on the left) at
Of course if you want the latest issues - join the club!
Sunset Garage
Officially Full-On Dubber
Posts: 213
Threads: 18
Registered: February 3rd, 2010
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
posted on June 7th, 2011 at 11:11 AM
It helps to know the colours; German Beetles for the 68 year are Royal Red, Lotus White, VW Blue, Chinchilla, Black, Delta Green, Savannah Beige and
Zenith Blue.
Maybe someone here can correct me if I'm wrong, but I thought all German 68's had their bonnet pull on the LHS of the passenger footwell with a
black, hard rubber, screw on ball, whereas Australian assembled Beetles moved the bonnet pull to the inside of the glovebox. That's the quickest way
I have found to tell the difference visually, and so far I've never come across an Australian 68 with this feature.
posted on June 3rd, 2011 at 10:28 PM
posted on June 4th, 2011 at 12:48 AM
