| [ Total Views: 525 | Total Replies: 5 | Thread Id: 91127 ] |
|
|
 donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on June 19th, 2011 at 08:45 PM |
|
|
Oil Temp Gauge
i have an oil temp gauge that has never worked, earthed the cable at the sender end and it causes the gauge needle to swing to the other end of the
gauge so I assumed that the sender is faulty, bought a new sender and still no go, it is in a buggy, any clues?
Thanks
Don
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
66brm
Seriously Crusin Dubber
Posts: 140
Threads: 4
Registered: November 13th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 20th, 2011 at 02:34 PM |
|
|
The gauge and the sender need to be matched, the sender normally has its range stamped on it.
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on June 20th, 2011 at 03:48 PM |
|
|
Done, that's what has me thrown, I took the gauge (VDO) in and got a sender to suit. 
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
Joel
Scirocco Rare
Now containing 100% E-Wang
Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline
Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00
|
| posted on June 20th, 2011 at 06:09 PM |
|
|
Where have you got the sender mounted?
If it's in the sump plate it probably works fine, they just don't get much of a reading there.
When I tried one there in winter after 20 mins driving the needle still hadn't moved.
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on June 20th, 2011 at 06:40 PM |
|
|
| Quote: | Originally
posted by donn
i have an oil temp gauge that has never worked, earthed the cable at the sender end and it causes the gauge needle to swing to the other end of the
gauge so I assumed that the sender is faulty, bought a new sender and still no go, it is in a buggy, any clues?
Thanks
Don
|
where is Your sender Don..?
Mine is in the type 3 dipstick plate... Works great..
needle doesn't move until I get out of town on the highway usually... in this weather its around 80C using either gauge
150C or the 120C... lol
remember the oil relief valve doesn't open until the oil gets HOT...
I have a different problem.. oil pressure gauge and sender...
and have use different senders... always full scale...
I'm going to bench test them, and see what happens...
cheers
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
donn
Wolfsburg Elder
Posts: 3515
Threads: 428
Registered: November 30th, 2005
Member Is Offline
Location: NEWCASTLE NSW
Theme: UltimaBB Pro Blue
Mood: LAID BACK AND CONFUSED
|
| posted on June 20th, 2011 at 08:44 PM |
|
|
The wench has a droped sump with external oil filter, the sensor is at the back of the sump near the filter, oil temp did not move at all on the mid
winter wander yesterday. 
I dream of a day when a chicken can cross a road without being asked for it's motive!
|
|
|
