| [ Total Views: 573 | Total Replies: 5 | Thread Id: 91282 ] |
|
|
 dubai
Seriously Crusin Dubber
Posts: 161
Threads: 67
Registered: October 15th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
 posted on June 27th, 2011 at 08:09 PM |
|
|
steering box worn out?
I have replaced everything in the front end of my 62 bug as it was worn out the only thing left thats not new is the steering box and the torsion
bars, Anyways when driving I hit bumps and sometimes I hear thud noises it has to be the steering box I have adjusted it up and filled it with grease
and it has a bit of play but basically can anyone else advise me if they have ever had nosies from a worn steering box or could it be a broken bar?
Thanks
Guys
|
|
|
bushed
Wolfsburg Elder
Posts: 3539
Threads: 66
Registered: December 18th, 2006
Member Is Offline
Location: Lowood Qld
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 27th, 2011 at 11:08 PM |
|
|
replaced shocky rubber and bush?? top and below
steer column bush at top under dash!! ???
want any vw bits old but like me, Made in Germany!!!
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on June 28th, 2011 at 01:35 PM |
|
|
| Quote: | Originally
posted by dubai
I have replaced everything in the front end of my 62 bug as it was worn out the only thing left thats not new is the steering box and the torsion
bars, Anyways when driving I hit bumps and sometimes I hear thud noises it has to be the steering box I have adjusted it up and filled it with grease
and it has a bit of play but basically can anyone else advise me if they have ever had nosies from a worn steering box or could it be a broken bar?
Thanks
Guys
|
shock absorber rubbers are the usual thing that wear out and go bang... they may look OK..
never ever heard of a steering box making a noise...??
don't know if a broken leaf will make a noise??
steering boxes usually just about forever...
they always have play in them...
they can be adjusted from the top and bottom...
both with the steering wheel pointing straight ahead..
never adjust with the steering wheel at full lock,,....lol
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
dubai
Seriously Crusin Dubber
Posts: 161
Threads: 67
Registered: October 15th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2011 at 04:56 PM |
|
|
Thanks for your replys I have already replaced shocks all new steering tie rods and tie rod bars literally theres nothing left but the box and the
bars that is not new when i had it all apart i was able to sort of produce the noise by pushing the pitman arm up and down but still i am keen to
know if anyone has seen this or heard it before.
Any suggestions?
Thanks again
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on June 28th, 2011 at 05:52 PM |
|
|
well
when the steering box is worn...
there is movement on the up and down part...
and there is an adjustment at the top..
a screw and nut...
loosen the nut and tighten the screw slightly
tighten up the nut...
there is also a large nut on the bottom which You can undo and tighten the large hex plug...
You are better off with a good used box rather buy a new one..
unless its a German one....
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
dubai
Seriously Crusin Dubber
Posts: 161
Threads: 67
Registered: October 15th, 2009
Member Is Offline
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 28th, 2011 at 06:55 PM |
|
|
Thanks Lee I will try the hex nut on the bottom havent tried that one yet.
Regards
|
|
|
