| [ Total Views: 832 | Total Replies: 6 | Thread Id: 92581 ] |
|
|
 chillihilli
Commited Dubber
Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline
Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 10th, 2011 at 11:02 PM |
|
|
Which starter spade terminal?
Hi guys. As part of my autostick replacement project, I removed and refitted my starter. The solenoid has 2 posts of which is used) and 2 spade
terminals. now I labelled the spade connector "top starter" but the spade terminals aren't really top and bottom they are more 10:00 and 3:00
looking toward the rear ofthe car. 3:00 being close to the trans. I suspect the spade connector goes to the 10:00 (ie the terminal closer to the
wheel), but can't specifically remember. does anyone have a definitive answer on this?
Thanks in advance !
71 Clementine Superbug Autostick
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
 posted on September 11th, 2011 at 02:37 AM |
|
|
| Quote: | Originally
posted by chillihilli
Hi guys. As part of my autostick replacement project, I removed and refitted my starter. The solenoid has 2 posts of which is used) and 2 spade
terminals. now I labelled the spade connector "top starter" but the spade terminals aren't really top and bottom they are more 10:00 and 3:00
looking toward the rear ofthe car. 3:00 being close to the trans. I suspect the spade connector goes to the 10:00 (ie the terminal closer to the
wheel), but can't specifically remember. does anyone have a definitive answer on this?
Thanks in advance !
|
Hi
Here is a pic of the solenoid of one of My auto starter motors
from memory, I don't think it matters..?
cheers
LEE
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
chillihilli
Commited Dubber
Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline
Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 11th, 2011 at 09:49 AM |
|
|
Thanks Lee. I have a spade terminal about where your screw is on the left. My battery cable (and another blue/white cable) goes on the post as yours.
I think I will take it out and have another look. Are those 2 spade terminals joined or separate do you know? According to the wiring diagram, the
wire goes from the ignition, via the neutral enable switch to the starter - hence one wire to energise the solenoid whilst the key is turned and the
trans is in neutral.
71 Clementine Superbug Autostick
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 11th, 2011 at 11:18 AM |
|
|
Hi
I'll check it out shortly for You...
I have had different starters in so I should know...
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline
Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -
|
| posted on September 11th, 2011 at 04:35 PM |
|
|
ONE TERMINAL IS MARKED 50
THAT IS THE ONE THAT GOES TO THE STARTER SWITCH
VIA THE NEUTRAL SWITCH
IT IS THE HIGHEST TERMINAL...
THE OTHER ONE DIDN'T DO ANYTHING WHEN TESTED??
LEE
- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
|
|
|
chillihilli
Commited Dubber
Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline
Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 12th, 2011 at 12:43 PM |
|
|
That makes sense. It's easy enough to pull out now with the engine out and up on stands so I'll pull it out tonight and have a good look at it and
let you know how I go.
71 Clementine Superbug Autostick
|
|
|
chillihilli
Commited Dubber
Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline
Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )
|
| posted on September 12th, 2011 at 10:54 PM |
|
|
I pulled it out tonight... the starter that is.. and put it on the bench. It looks more like this pic I found on Rob and Daves site:
The terminal located "high and to the right" is labelled 50, same as yours. The terminal low and to the left is labelled 15a so I have no idea what
it's for! Obviously not used in our application.
cheers Peter.
71 Clementine Superbug Autostick
|
|
|
