Board Logo
Go To Bottom

Printable Version  
[ Total Views: 2049 | Total Replies: 45 | Thread Id: 93985 ]
 Pages:  1  2
Author: Subject:  oil cooler hose came off... at 100 kmh..... No Oil... GREAT NEWS - ENGINE OK..
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

info.gif posted on November 24th, 2011 at 06:15 PM
oil cooler hose came off... at 100 kmh..... No Oil... GREAT NEWS - ENGINE OK..


Well
My oil cooler hose came off at 100 KMH a couple of days ago...
My fault.. clamps weren't tight...
I felt a Power Loss and a drop in speed...
looked out My rear vision Mirror... BLUE SMOKE...
so I turned the engine off and pulled off the highway..
looked under the back and a big pool of engine oil...

My first thoughts were the oil cooler [temporary] had hit something.. or the road....
but I let the car run down the hill and onto a side road where I jacked the car up, took the wheel off and found the oil cooler hanging by one hose.. and a tie down...??

I rang My wife to bring Me some oil... so I refitted the oil cooler and filled the engine with oil....
and drove back home... car goes and idles but its like it has some fouled spark plugs ...
I checked all the tappets today... all correct...

I was on My way to get My car passed for rego...

do I drive the 30klms next monday and have the car passed before I pull the engine out and pull it apart???

what are Your thoughts????

looks like all the oil galleries are still clear???

LEE

Error
Sorry, you must be a registered user in order to download attachments.




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on November 24th, 2011 at 06:41 PM



Is the engine noisy, knocking of any kind, check the oil pressure, check the plugs, did the engine ingest the oil through the air filter, it pays to spend money on good braided lines with the correct JIS/SAE fittings.
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on November 24th, 2011 at 07:01 PM



oh pooh
not good but how did u forget to tighten up themes hoses? :grind:
sounds expensive
bingo for the pic as I was looking for it covered in oil?
I wonder if magnateck would of held it all together??
put some moreys in it n it should be fine maybe :)




fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
Memberdangerous
A.k.a.: Dave Butler Muffin Man
23 Windows of Awesome
********


Avatar


Posts: 5901
Threads: 178
Registered: January 6th, 2005
Member Is Offline

Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
Mood: 591

posted on November 24th, 2011 at 07:04 PM



If it was slowing its self down it will be shagged.
Time to get rid of all that extra bolt on stuff Lee.
Stock engines dont need it.
"parts left out cost nothing, and cause no service difficulties"




Quote:
Originally posted by westi
That's mad Alan.
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on November 24th, 2011 at 07:05 PM



It pays to just use a VW cooler and scrap the external crap :lol:



Membervlad01
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline

Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways

posted on November 24th, 2011 at 07:30 PM



all the bearings and journals a fuched! especially with castrol stuff in it :lol:

yeah it will need rebuilding since it lost power and engine speed when it happen.




http://i1015.photobucket.com/albums/af278/vladk01/notch04.png
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
MemberSmiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
*****


Avatar


Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline

Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd

posted on November 24th, 2011 at 09:28 PM



Did you not notice the oil pressure warning light when it came on??


Smiley :)




If you said I was a Volkswagen man, you'd be right.
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on November 24th, 2011 at 09:43 PM



absolutly nothing wrong with external coolers if they are done correctly, i would like to see some of the high horse power engines run with only the dog house cooler.
MemberCraig Torrens
A.k.a.: Craig Torrens
Scirocco Rare
6 times Australian, 7 times State Hillclimb Class Champion
*********


Avatar


Posts: 8040
Threads: 347
Registered: January 10th, 2003
Member Is Offline

Location: Sydney
Theme: UltimaBB Pro Blue ( Default )
Mood: Time to go Salt lake racing, and actually achieve a result.

posted on November 24th, 2011 at 09:48 PM



I only run with the dog house cooler.......but I only have around 140hp atw :D

Like you said, coolers need to be of the right quality and installed correctly.




Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on November 24th, 2011 at 11:01 PM



Quote:
Originally posted by vwo60
Is the engine noisy, knocking of any kind, check the oil pressure, check the plugs, did the engine ingest the oil through the air filter, it pays to spend money on good braided lines with the correct JIS/SAE fittings.


Worst part is... I have a new doghouse oil cooler to go in....!!
No knocking or noise at all...

just low in power... plenty of compression when turning the crankshaft pulley to check the tappets...
I will check the spark plugs...

the oil went underneath the car all over the RH side of the exhaust and muffler...
although most went on the ground when i stopped...?

I didn't notice the oil light come on...
I will Now have an EXTRA VERY BRIGHT oil light - so I will see it go on..

someone on here said they used the oil light to turn off the ignition if the oil pressure drops... I wish I had done that...!!

it would have saved a lot of problems and money...

Now I just need to get it passed for rego so I can pull it apart...

usually I check all hose clamps at least 6 times... and I used to double clamp years ago...
especially fuel hoses...

I hope You are wrong Vlad...
maybe the bearings are scored slightly?? all bearings??

cheers

LEE

Back to standard next time.... no more temporary oil coolers.

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on November 25th, 2011 at 06:40 AM



Its the hoses not the cooler
Member1303Steve
A.k.a.: Steve Carter
Scirocco Rare
*********


Avatar


Posts: 8636
Threads: 559
Registered: August 27th, 2002
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Parrot Heading

posted on November 25th, 2011 at 07:07 AM



Hi Lee

Sorry to hear of your misfortune, maybe time for a bit more power twin port heads and 1776, would make a nice upgrade and the semi auto can handle it OK.

I've fitted a double through relay to control a fuel pump, you could use it to turn power off to the ignition coil if you loose oil pressure.

87 not used
87A goes to the ignition coil
85 goes to the oil pressure warning light wire
86 & 30 are joined and fed by the ignition switch

On this relay when its at rest with no ignition feed, no power comes out of the relay at 87 or 87A

Turn the ignition on and the relay gets earth from the oil pressure switch, no power comes out of 87A, it only come out of 87 which is not used.

When the oil pressure builds the warning light goes out and the relay has no earth so it goes back to rest state but power goes through the relay at pin 30 and on to 87A to power the ignition coil, if there is no oil pressure the relay is earthed again which takes power away from 87A.

Steve

Error
Sorry, you must be a registered user in order to download attachments.
MemberJoel
Scirocco Rare
Now containing 100% E-Wang
*********


Avatar


Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline

Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00

posted on November 25th, 2011 at 07:44 AM



Definately not one of VWs brighter ideas in flat windscreen beetles, using such a piddly little oil pressure idiot light that you need a magnifying glass to see.
Even more so making it green of all colours in 68 and earlier bugs, what were they thinking...

I had a warning beeper on mine that was loud enough to be noticed while driving but not to be annoying everytime the ignition was turned on.

An oil pressure gauge is an invaluable tool though, I have fitted them in every VW i use on the road.

Driving down the road at 100km/h your engine is turning 3000rpm or more, by the time that light comes on at 3psi or less and you notice it and stop the engine it's on borrowed time.
An oil pressure gauge you would catch it slowly dropping off earlier.
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on November 25th, 2011 at 08:15 AM



Quote:
Originally posted by Joel
Definately not one of VWs brighter ideas in flat windscreen beetles, using such a piddly little oil pressure idiot light that you need a magnifying glass to see.
Even more so making it green of all colours in 68 and earlier bugs, what were they thinking...

I had a warning beeper on mine that was loud enough to be noticed while driving but not to be annoying everytime the ignition was turned on.

An oil pressure gauge is an invaluable tool though, I have fitted them in every VW i use on the road.

Driving down the road at 100km/h your engine is turning 3000rpm or more, by the time that light comes on at 3psi or less and you notice it and stop the engine it's on borrowed time.
An oil pressure gauge you would catch it slowly dropping off earlier.


agreed
I have volts, oil pressure n temp gauge in my beetle
I'm always keeping an eye on them while the little girl is barreling down the highway
much more accurate than the little man in the dash who lights the oil light candle when something is wrong
you get to know how things roll n if it isn't right you can spot it shut it down n check it out before the 'lee' syndrome kicks in n losses the lot
invest in some gauges lee n set em up n I'm sure you can colour em pink or yellow to suit your attire ;)




fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
MemberJoel
Scirocco Rare
Now containing 100% E-Wang
*********


Avatar


Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline

Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00

posted on November 25th, 2011 at 08:27 AM



Quote:
Originally posted by h
I'm sure you can colour em pink or yellow to suit your attire ;)


Yep, all the colours of the rainbow.......Literally :lol:

http://www.taiwantrade.com.tw/MAIN//resources/member/646/productcatalog//5e37f700-6de1-4763-918a-07bc013b5b5a_SGEAR7C.jpg
Memberchillihilli
Commited Dubber
**


No Avatar


Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline

Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )

posted on November 25th, 2011 at 08:44 AM



Quote:
Originally posted by Joel
An oil pressure gauge you would catch it slowly dropping off earlier.


I'll second that. Whilst I don't have that much VW experience, I do have a pilots license :yes: . Most light planes use a bigger version of a VW engine (flat 4 Continental or Lycoming). As you learn to fly you are taught to watch the oil pressure gauge constantly. Its the earliest indicator of an impending engine failure as a symptom of a problem somewhere in the oil circulation/sealing systems.

Here's an interesting story about reacting early to an oil pressure gauge reading low:

http://www.equipped.com/1199ditch.htm 

Cheers Pete.




71 Clementine Superbug Autostick
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on November 25th, 2011 at 08:52 AM



Gauges are good....but you have to notice them.

Sorry for your loss Lee




Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on November 25th, 2011 at 08:55 AM



well I have an oil pressure gauge which reads full scale as soon as the ignition is turned on....
so... another thing I should have fixed....??
Buzzer sounds great too...


LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********


Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on November 25th, 2011 at 01:32 PM



OHH NO! sorry to hear Lee, :td:

Your story is typical of a veedubbers nightmare. Lets hope its nothing serious. Lucas oil stabiliser is great insurance for short durations of complete lost oil pressure. I been using it in fear of a drained sump after all the fun with oil leaks i have had. Nuffin worse though then when the crap happens to ya, and we all tell ya what you should have done which doesn't help ya right now lol, but i'm sure mate you'll get back on the road soon. have you measured the compression on each cylinders? no chance of the piston rings just being a bit dry? (desperately trying to give some rookie hints to excite some hope)




(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Memberchillihilli
Commited Dubber
**


No Avatar


Posts: 64
Threads: 19
Registered: October 13th, 2010
Member Is Offline

Location: Melbourne Victoria
Theme: UltimaBB Pro Blue ( Default )

posted on November 25th, 2011 at 01:54 PM



Quote:
Originally posted by 68AutoBug
well I have an oil pressure gauge which reads full scale as soon as the ignition is turned on....
so... another thing I should have fixed....??
Buzzer sounds great too...
LEE


If it didn't drop pressure when your hose came off then it's obviously faulty.. I think you've answered your own question... I've been thinking about an oil pressure gauge. Do you have an oil temp guage? What did that say?




71 Clementine Superbug Autostick
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on November 25th, 2011 at 05:23 PM



Quote:
Originally posted by bajachris88
OHH NO! sorry to hear Lee, :td:

Your story is typical of a veedubbers nightmare. Lets hope its nothing serious. Lucas oil stabiliser is great insurance for short durations of complete lost oil pressure. I been using it in fear of a drained sump after all the fun with oil leaks i have had. Nuffin worse though then when the crap happens to ya, and we all tell ya what you should have done which doesn't help ya right now lol, but i'm sure mate you'll get back on the road soon. have you measured the compression on each cylinders? no chance of the piston rings just being a bit dry? (desperately trying to give some rookie hints to excite some hope)


I haven't started it again since I drive it home...
with NEW Magnatech in it.,...

I'm sure?? that a bearing has been picked up... due to no oil and over heating [friction]

the oil temperature gauge didn't go HIGH... as I do watch it..
it was on about 60 or 80C degrees...

but once the oil drained out... the temperature gauge wasn't measuring anything...

Hoping for maybe New bearings and a crankshaft polish...??

as it wasn't an overheating problem... Air was still flowing over the cylinders etc...
but lack of lubrication = friction= heat .. and ??? YIKES..

Chris
I always pour some oil in the spark plug holes when I've had an engine apart - [ heads or cylinders/pistons etc.. ]

cheers

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on November 25th, 2011 at 06:55 PM



oh magnatech ;) nice one
it shoulda stuck on :tu:




fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
Membervlad01
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline

Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways

posted on November 25th, 2011 at 07:21 PM



Quote:
Originally posted by h
oh magnatech ;) nice one
it shoulda stuck on :tu:



thats just marketing! most if not all oils have polarized chemicals that make it stick and wicks across metals to form a sacrificial surface.

It wouldn't surprise me if magnatec has one of the least of all brands.

ZDDP is one of those and magnatech doesn't have much of that.

omg :no: checked their site and they don't even tell the content on their spec sheet and they how have a fuel saver magnatec? that definitely can't be good.




http://i1015.photobucket.com/albums/af278/vladk01/notch04.png
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Membervwo60
Veteran Volks Folk
*****


Avatar


Posts: 2036
Threads: 71
Registered: February 13th, 2007
Member Is Offline

Location: Pomona Qld
Theme: UltimaBB Psyche Blue
Mood: good

posted on November 25th, 2011 at 08:33 PM



I would put castrol in my oil can.
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on November 25th, 2011 at 10:03 PM



Quote:
Originally posted by vlad01
Quote:
Originally posted by h
oh magnatec ;) nice one
it shoulda stuck on :tu:





thats just marketing! most if not all oils have polarized chemicals that make it stick and wicks across metals to form a sacrificial surface.

It wouldn't surprise me if magnatec has one of the least of all brands.

ZDDP is one of those and magnatec doesn't have much of that.

omg :no: checked their site and they don't even tell the content on their spec sheet and they how have a fuel saver magnatec? that definitely can't be good.


Hi
The fuel saver oils started a few years ago in the USA..
Ford couldn't reduce their fuel consumption enough to meet the new USA laws... so they used 5w/10 engine oil [?? from memory] which reduced their fuel consumption enough to pass the fuel consumption law..
so that was the fuel saver oil... lol

I think I will change to a different brand of oil...
Castrol don't give You any info on them especially ZDDP..
and have definately changed their oil specs recently...
GTX 2 has gone... Now there are Two GTX...
and two or more magnatecs...??

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on November 25th, 2011 at 10:21 PM



Quote:
Originally posted by vlad01
Quote:
Originally posted by h
oh magnatech ;) nice one
it shoulda stuck on :tu:



thats just marketing! most if not all oils have polarized chemicals that make it stick and wicks across metals to form a sacrificial surface.

It wouldn't surprise me if magnatec has one of the least of all brands.

ZDDP is one of those and magnatech doesn't have much of that.

omg :no: checked their site and they don't even tell the content on their spec sheet and they how have a fuel saver magnatec? that definitely can't be good.


:crazy: :lol:




fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
Membercnfabo
Custom Title Time!
*****


No Avatar


Posts: 1353
Threads: 140
Registered: April 15th, 2008
Member Is Offline

Theme: UltimaBB Pro Blue ( Default )

posted on November 25th, 2011 at 11:02 PM



Quote:
Originally posted by Craig Torrens
I only run with the dog house cooler.......but I only have around 140hp atw :D

Like you said, coolers need to be of the right quality and installed correctly.


don't see why you would need a external oil cooler when you only race hillclimbs....circuit stuff yes.....
Super Moderatormatberry
Super Moderator
Go hard or go home
*******

Rank Avatar

Avatar


Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline

Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3

posted on November 25th, 2011 at 11:26 PM



Col's 2332 is 140+ rwhp and has no ext cooler, just stock doghouse and 9.7:1 CR, ceramic coatings definately help though. It's all in the engine build. My new car has an old 1915 and it runs heaps hotter but makes less power than the 2332. During an engine optimisation, it's often possible to make more power with less engine temperature, comes down to the engine build details.



Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
http://i375.photobucket.com/albums/oo199/mattberry-photo/20032011354-2.jpg
Membervlad01
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline

Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways

posted on November 26th, 2011 at 11:14 AM



Joe Gibbs oil is ace!

A Raby developed version should be available at Joe Gibbs distributors. That version is called "Joe Gibbs Driven DT50" oil specially for the VW and Porsche AC engine.

Years or R & D went into this oil and its a carry on from the Snake oil that Raby developed with Joe Gibbs oil chemists at hand.

can't see it on their site but I am sure if you request it they can get some in.




http://i1015.photobucket.com/albums/af278/vladk01/notch04.png
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Memberh
A.k.a.: Towely BuMpEr KING! ILLegal ALIEN on a roadtrip
Scirocco Rare
fractals - an ever changing lifestyle
*********


Avatar


Posts: 7670
Threads: 375
Registered: February 3rd, 2005
Member Is Offline

Location: noosa hillbilly 'yee har'
Theme: XMBX Pro Green
Mood: A T3 is not a Kombi - stop waving at me

posted on November 26th, 2011 at 01:35 PM



castrol = crisko :lol:



fractal geometry; the inner most limits of mind altering abuse

Fantasy http://seventhchronicle.com 

Z = Z2 + C1/r = 1/0 = infinity

Barrels http://www.barrelman.com.au 

VW Workshop - aircooledgarage.com.au
allcooled.com.au
 Pages:  1  2


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 4.2% - SQL: 95.8% ]