Board Logo
Go To Bottom

Printable Version  
[ Total Views: 994 | Total Replies: 16 | Thread Id: 95894 ]
Author: Subject:  Rosie is missing badly
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:03 PM
Rosie is missing badly


For the last few weeks Rosie has developed quite a miss, at times she drives smoothly but other times when you accelerate she bogs down and splutters / backfires and lack of power.

Checked dizzy, leads and coil wiring but still seems to be an electrical issue

I will be getting her tuned soon just need to be able to drive her for rego inspection next weekend

Any ideas what it could be?




MemberCamo
A.k.a.: Kev
Custom Title Time!
*****


Avatar


Posts: 1936
Threads: 209
Registered: October 29th, 2007
Member Is Offline

Location: Sydney - Liverpool area
Theme: UltimaBB Pro Blue

posted on March 18th, 2012 at 03:09 PM



Hi Paul,

try replacing the condenser on the side of the distributor. Years ago I had one that tested ok, but the problem was solved when I replaced it and was doing like yours.

Kev




I thought rebuilding a VW would be cheap - Shit I was wrong, just don't let the wife know !!!!

Click here for my (slowy) modded 1961 Beetle build.
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:12 PM



I am wondering with all this rain because one day she was running fine two weeks later she was hard to start then mssing badly



Membershokwave2
A.k.a.: Matt Hamilton
Officially Full-On Dubber
***


Avatar


Posts: 289
Threads: 28
Registered: March 7th, 2010
Member Is Offline

Theme: UltimaBB Psyche Blue

posted on March 18th, 2012 at 03:15 PM



Coil may be on it's way out. If you can borrow a coil, swap them and see.
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:17 PM



Quote:
Originally posted by shokwave2
Coil may be on it's way out. If you can borrow a coil, swap them and see.


Was wondering that could be the cause noticed an oily substance on the connections




Memberpod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
*******


Avatar


Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline

Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better

posted on March 18th, 2012 at 03:18 PM



is it standard or electronic dizzy?



meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/ 
and on Facebook https://www.facebook.com/FlatFour 
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:19 PM



Quote:
Originally posted by pod
is it standard or electronic dizzy?


I think its standard




Memberpod
A.k.a.: paul mrvw061
Compulsive Aussie Vee Dubber
i`ve got to finish this thing one day
*******


Avatar


Posts: 4980
Threads: 145
Registered: December 28th, 2003
Member Is Offline

Location: campbelltown,nsw
Theme: UltimaBB Pro Yellow
Mood: could be better

posted on March 18th, 2012 at 03:20 PM



so it has points?



meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/ 
and on Facebook https://www.facebook.com/FlatFour 
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:22 PM



ummmmm has a rotar but now i dont think it does have points



Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

info.gif posted on March 18th, 2012 at 03:43 PM



Quote:
Originally posted by Paulc1964au
I am wondering with all this rain because one day she was running fine two weeks later she was hard to start then mssing badly


take the dizzy cap off and wipe inside the cap with WD40 or other dewatering fluid.. including the rotor...
also spray the end of the coil and take the lead out and wipe it too.. may be water or just condensation causing the miss.. in high tension area..
dust and moisture make a good short circuit..

You can change coils and try it... or dizzy cap.. and leads even..
have You checked the points gap? run a points file or wet & dry paper thru them.. a few times..
a condensor can also die at any time... although most do when they get hot..

cheers

LEE

PS: Painting the engine yellow will have NO effect at all.. lol
and painting a coil has no effect either..:lol:

Error
Sorry, you must be a registered user in order to download attachments.


Error
Sorry, you must be a registered user in order to download attachments.




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 03:45 PM



lee great tips will give that a try



MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 05:51 PM



I hit the dizzy cap with wd40 and cleaned the rotor button and points. Then as i was about too put the cap back on the centre carbon tip fell out. Called my neighbour who is much more mechanical minded than me and he tightened the spring and put the tip back. He also noticed the points were pretty much closed so he opened them slightly. Car started ok but still seems to have a slight miss.



Membergreedy53
Bishop of Volkswagenism
******


Avatar


Posts: 3062
Threads: 468
Registered: March 4th, 2006
Member Is Offline

Location: camden nsw 2570
Theme: UltimaBB Pro Grey
Mood: strung out

posted on March 18th, 2012 at 06:17 PM



check the points gap a good placed to start



:yes::yes::lol::no::ninja::grind::dork:
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 06:19 PM



Quote:
Originally posted by greedy53
check the points gap a good placed to start


seemed to be closed at the high spot, what feeler gauge do i need to use?




MemberSmiley
A.k.a.: Daniel Stephens
Veteran Volks Folk
*****


Avatar


Posts: 2125
Threads: 110
Registered: October 29th, 2008
Member Is Offline

Location: Yeppoon, Central Queensland
Theme: UltimaBB Pro Blue
Mood: Synchro'd

posted on March 18th, 2012 at 08:28 PM



Quote:
Originally posted by Paulc1964au
Quote:
Originally posted by greedy53
check the points gap a good placed to start


seemed to be closed at the high spot, what feeler gauge do i need to use?


0.016" is the factory setting.



Smiley :)




If you said I was a Volkswagen man, you'd be right.
MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 18th, 2012 at 08:30 PM



thanks Adam from RAW is going to take a look at her tomorrow night so will let you know what he finds



MemberPaulc1964au
Custom Title Time!
*****


Avatar


Posts: 1627
Threads: 59
Registered: March 5th, 2010
Member Is Offline

Location: Sydney, NSW
Theme: UltimaBB Pro Blue ( Default )

posted on March 19th, 2012 at 06:57 PM



Today I took rosie up to Adams workshop but before I started her I checked the wire terminals at behind the dash in case there was a loose wire. There were a couple that i pushed onto the spade lugs but nothing jumped out at being loose. She started first go and purred all the way to the RAW workshop. Adam checked her over and adjusted the timing which was out but not by far. Everything else looked fine and she ran great back home.

Maybe I didnt let the WD40 dry in the distributor cap yesterday or maybe Rosie has been upset with me knowing I have another VW on the way :). Hopefully the issue has resolved itself (fingers crossed)

BTW thanks everyone for their suggestions especially LEE who pmed me some advice as well






  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 3.0% - SQL: 97.0% ]