| [ Total Views: 541 | Total Replies: 4 | Thread Id: 99092 ] |
|
|
 Aussie
Officially Full-On Dubber
Posts: 296
Threads: 43
Registered: September 15th, 2006
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 6th, 2012 at 08:07 PM |
|
|
Fuel tank fitting
Does anyone know if there is a fuel tank fitting (simple barb like on a late beetle) that bolts onto the outlet and would eliminate the reserve tank
control valve on an Oval bug tank? Mine seems to be leaking slightly so I want to sort it out.
|
|
|
Aussie
Officially Full-On Dubber
Posts: 296
Threads: 43
Registered: September 15th, 2006
Member Is Offline
Location: Gold Coast
Theme: UltimaBB Pro Blue ( Default )
|
| posted on October 15th, 2012 at 08:15 PM |
|
|
Bump?????? Would a late model fitting bolt straight onto an early tank?
|
|
|
psimitar
Son of Jim - Creator of Good
Posts: 2506
Threads: 148
Registered: January 1st, 2009
Member Is Offline
Location: North East Melbourne, VIC
Theme: UltimaBB Psyche Blue
|
| posted on October 19th, 2012 at 11:55 PM |
|
|
You just need to check out the thread size and then look for hydraulic/oil brass connection. Maybe even the aluminium areoquip braided hose fitting
would come in that size.
madness is in the eye of the beholder  |
|
|
HappyDaze
A.k.a.: Greg Mackie
Son of Jim - Creator of Good
Superannuated
Posts: 2887
Threads: 141
Registered: June 13th, 2009
Member Is Offline
Location: Southern Highlands NSW
Theme: UltimaBB Pro Blue ( Default )
Mood: Happy enough
|
| posted on October 20th, 2012 at 07:20 AM |
|
|
I tapped the outlet hole in the tank to 1/4" BSP....plenty of grease on the tap to collect the bits of metal. A 1/4" BSP hose tail to suit your
rubber hose will be easy to find [Pirtek, etc.], and your original tap can always be re-fitted, if required.
I'd rather wear a Beetle out by racing it than by polishing it!
|
|
|
 matberry
Super Moderator
Go hard or go home
Posts: 8114
Threads: 134
Registered: March 7th, 2006
Member Is Offline
Location: Cooroy Qld
Theme: UltimaBB Pro Blue
Mood: enjoying waving at all my Kombi buddies from my T3
|
| posted on October 20th, 2012 at 08:11 AM |
|
|
Or replace the tap fitting with a normal beetle fitting as you suggested, they are interchangable. Or you can tap out a nomal outlet to 3/8 BSP for a
barbed fitting similar to what Greg has suggested but into the fitting instead of the tank. Or buy one of these, available in -6 or -8. http://www.piersideparts.net/CB3288.html
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
 |
|
|
