Subject: REMOVING type 3 fan/CRANK pulley?? need some wisdom/help!
bajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline
Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!
posted on August 11th, 2009 at 06:53 PM
REMOVING type 3 fan/CRANK pulley?? need some wisdom/help!
hi.
I'm tearing into a type 3 1600... pulling down to a long block to prep up for a type 1 beetle fan setup.
but i can't seem to get this crank pulley off because i can't stop the crank from turning . i pocked around trying to lock it up but i don't wanna bust anything and thought i would ask before i go blazing
saddles... I'm hoping to get this sorted without needing special tools, cause i don't intend on doing this on an often basis.. and am putting this
weeks $ to some fresh beetle cooling tin.
any help would be much appreciated!
many thanks,
Christopher.
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears.
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
1500S
Custom Title Time!
Posts: 1418
Threads: 73
Registered: March 28th, 2005
Member Is Offline
Location: Nth Richmond, N.S.W
Theme: UltimaBB Pro Blue ( Default )
posted on August 11th, 2009 at 07:32 PM
Have you got a flywheel lock? A piece of 50 x 50 x 6 angle iron about 1m long with 2 holes to bolt onto the flywheel with 2 clutch bolts will do.
posted on August 11th, 2009 at 06:53 PM
. i pocked around trying to lock it up but i don't wanna bust anything and thought i would ask before i go blazing
saddles... I'm hoping to get this sorted without needing special tools, cause i don't intend on doing this on an often basis.. and am putting this
weeks $ to some fresh beetle cooling tin.
