Board Logo
Go To Bottom

Printable Version  
[ Total Views: 1122 | Total Replies: 12 | Thread Id: 94561 ]
Author: Subject:  NOS parts rock
Super ModeratorYogie
Super Moderator
*******

Rank Avatar

Avatar


Posts: 1603
Threads: 108
Registered: June 7th, 2003
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue

thumbup.gif posted on January 1st, 2012 at 12:38 PM
NOS parts rock


I have never had a good reading from my fuel guage in our S bug. It read anywhere from way over the full mark on the gauge to just over half a tank when empty (ask me how I found that out :lol:)
I bought an NOS sender and an NOS vibrator to try and sort it out. I checked the new sender and adjusted the tabs so it read 10 ohms when full and 70 ohms when empty. I fitted that and checked the reading on the gauge. For the first time it read under half full but it was only just over empty on the guage yet I could see fuel in the tank when I swapped the senders.
I then fitted the new sender and the reading went to about halfway between 1/4 and 1/2 tank. After I went to the servo and filled up, the tank took 25.6 litres which is just about where it should have been for the reading. After starting up, the guage sat right in the full mark on the guage.

Finally a fuel gauge that is accurate :cool:

Yogie
Super ModeratorBizarre
Super Moderator
The artist formerly known as blue74l
*******

Rank Avatar

Avatar


Posts: 12757
Threads: 732
Registered: August 25th, 2002
Member Is Offline

Location: Abbotsford, Sydney
Theme: UltimaBB Pro Blue ( Default )

posted on January 1st, 2012 at 12:56 PM



where did you get them from??

mine i fill to overflowing and it reads 1/2 full
Not brave enough (or stoopid) to drive till I run out
I only get about 150kms before it is in orangae




Futue te ipsum!!!
MemberJoel
Scirocco Rare
Now containing 100% E-Wang
*********


Avatar


Posts: 9368
Threads: 211
Registered: February 14th, 2006
Member Is Offline

Location: Northern Rivers NSW
Theme: UltimaBB Pro Purple
Mood: Tact Level 0.00

posted on January 1st, 2012 at 01:01 PM



Barry, try running an extra earth to the sender.

Mine used to only go to 3/4 when full and I ran out midway through Reserve.

I ran a new earth to the sender and the fuel gauge stabilisor screw and now it goes almost all the way to full and I've ran it to midway through Reserve and filled up I had 6 Litres left.
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on January 1st, 2012 at 02:24 PM



I had to add an earth wire to my tank sender too...

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Super ModeratorYogie
Super Moderator
*******

Rank Avatar

Avatar


Posts: 1603
Threads: 108
Registered: June 7th, 2003
Member Is Offline

Location: Brisbane
Theme: UltimaBB Pro Blue

posted on January 1st, 2012 at 03:14 PM



Mine already had an earth wire as part of the set up but they still didn't read accurately. Both the sender and vibrator were new aftermarket ones and earthed properly but never worked. I bought these ones from guys on Samba. One was in the UK (vibrator) and the other the USA (sender). Keep an eye out as there will probably be more listed at some time.

Yogie
Membervlad01
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline

Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways

posted on January 1st, 2012 at 05:24 PM



Quote:
Originally posted by 68AutoBug
I had to add an earth wire to my tank sender too...

LEE


That is actually a good idea! I'll keep that in mind

They would have poor earthing with the paint on the tank.

Thanks Lee :tu:




http://i1015.photobucket.com/albums/af278/vladk01/notch04.png
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on January 1st, 2012 at 05:37 PM



Quote:
Originally posted by vlad01
Quote:
Originally posted by 68AutoBug
I had to add an earth wire to my tank sender too...

LEE


That is actually a good idea! I'll keep that in mind

They would have poor earthing with the paint on the tank.

Thanks Lee :tu:



Mine didn't work at all
that's what I put it down to Vlad, as the tank was painted plus the body plus the tank clamps..

and I sat the tank on blutac so it wasn't touching the body either... lol

Lee




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

yes.gif posted on January 1st, 2012 at 05:46 PM
Back to NOS Parts...


NOS Parts,,

I just received an NOS gearshifter lock out plate for a semi auto beetle from the USA...

I also bought an NOS set of auto starter motor brushes from the USA..


LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on June 5th, 2012 at 10:17 AM



Quote:
Originally posted by vlad01
Quote:
Originally posted by 68AutoBug
I had to add an earth wire to my tank sender too...

LEE


That is actually a good idea! I'll keep that in mind

They would have poor earthing with the paint on the tank.

Thanks Lee :tu:


the only way they can really earth out is thru the bolts holding the tank in... but although My screws are new zinc plated ones the plates holding the tank are painted.. so no contact there...
plus the tank is painted.. so no contact there... lol

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Memberbajachris88
A.k.a.: Chris Leete
23 Windows of Awesome
The international telephone dialing code for Antarctica is 672.
********


Avatar


Posts: 6661
Threads: 534
Registered: April 8th, 2005
Member Is Offline

Location: Tanah Merah, SE-QLD
Theme: UltimaBB Pro Blue ( Default )
Mood: A bee bit ma' bottom, now ma' bottom's big!

posted on June 5th, 2012 at 11:17 AM



Poor earth due to the paint is the usual culprit.

I connected a wire to the fuel sender by clamping it under one of the 6 (or eight? i forget) fuel sender screws. You then have a direct metal-on-metal contact. Just place the other end anywhere on the body metal. i believe i have mine on the headlight earth screw point.




(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. :tu:
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!
Memberempi
A.k.a.: Empstar
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4131
Threads: 178
Registered: August 27th, 2002
Member Is Offline

Location: melbourne
Theme: UltimaBB Pro Blue ( Default )
Mood: thunderous

posted on June 5th, 2012 at 11:23 AM



NOS can also stand for Nasty Old Shit!!:fakesniff:



"If at first you don't succeed, skydiving is not for you." - Anonymous :ninja:
Member68AutoBug
A.k.a.: Lee Noonan
Aircooled Master
Beetle Restorer - Experience over 138% - YIKES --
**********


Avatar


Posts: 11654
Threads: 449
Registered: August 31st, 2002
Member Is Offline

Location: SCONE in UPPER HUNTER VALLEY NSW
Theme: UltimaBB Pro Yellow
Mood: Really Mentally Ill - all of the time -

posted on June 5th, 2012 at 12:05 PM



Quote:
Originally posted by empi
NOS can also stand for Nasty Old Shit!!:fakesniff:


NOS rubber parts can be too hard to use after sitting for 40 years the rubber goes hard and can be brittle or non flexible..
so can be un-useable..

otherwise they can be a part no longer available like a steel reverse lock out plate for a semi automatic beetle.. which I bought from the USA last year...

LEE




- [size=4]Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY--- [/size]
Membervlad01
Compulsive Aussie Vee Dubber
*******


Avatar


Posts: 4270
Threads: 109
Registered: June 3rd, 2010
Member Is Offline

Location: Kyneton, VIC
Theme: UltimaBB Pro Blue ( Default )
Mood: Side ways

posted on June 5th, 2012 at 06:28 PM



Quote:
Originally posted by empi
NOS can also stand for Nasty Old Shit!!:fakesniff:


yes thats true. I had picked up some NOS parts that were terrible condition. Very hard to tell from pictures some times.




http://i1015.photobucket.com/albums/af278/vladk01/notch04.png
71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE


  Go To Top


Powered by GaiaBB, © 2011 The GaiaBB Group
(C) 2001-2024 Aussieveedubbers

[ Queries: 40 ] [ PHP: 1.7% - SQL: 98.3% ]