| [ Total Views: 2300 | Total Replies: 58 | Thread Id: 52335 ] |
| Pages: 1 2 |
|
|
 Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:06 PM |
|
|
see my new thread 'type 3 parts for sale.'
Seller's Name – Kai
Suburb / Post Code – Avalon NSW 2107
Item Description including Brand – see below
Condition – see below
Item Cost - see below
i no longer have the time, space or money for this project.
i would prefer to sell as a job lot. but if i have no interest within a week or two i will part the car out.
the car itself is currently dismantled and not running.
there are some rust issues, mainly at the bottom of the rear wings just behind the doors. i have previously had the sills repaired (they still need
more work) and the front wings repaired.
the engine is a later model 1600 with fuel injection, it has a microtec computer and was running when i took the car off the road.
the whole braking system was replaced/upgraded by cbb, with new discs and calipers on the front, a rear disc conversion, and a new master cylinder.
it's all setup for late model 4 stud wheels.
all the glass is there, i have a number of brand new seals (i'll list them a.s.a.p.)
i have a pair of rust free doors, a rust free bonnet and a rust free front valance (complete front panel)
more parts than you could shake a bloody big stick at!
seperate to the vehicle i also have:
a set of alloy wheels with brand new yokohama rubber
&
a 1.8 litre type 4 motor, was running when i bought it, i've since taken off the carbs and most of the tinware.
if someone is interested in taking the whole lot off my hands i'm open to offers above $1000 (edited)
the wheels with tyres and nuts/botls will be $sold (the tyres alone cost that much)
the type 4 engine: offers around $SOLD
as i said, i'd rather shift it as a job lot. so if you're after parts (other than the wheels and engine) feel free to ask questions and make offers,
but i wont sell parts for about 2 weeks (ish).
pictures to follow...
thanks
kai
(edit) for any offers or questions please contact me by replying here or through u2u. thanks
[ Edited on 18-5-2006 by Kai.A. ]
[ Edited on 22-5-2006 by Kai.A. ]
[ Edited on 24-6-2006 by Kai.A. ]
[ Edited on 24-6-2006 by Kai.A. ]
[ Edited on 3-7-2006 by Kai.A. ]
[ Edited on 10-7-2006 by Kai.A. ]
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:07 PM |
|
|
here's a pic of the car as it sits now.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:09 PM |
|
|
the doors
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:10 PM |
|
|
the car again
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:11 PM |
|
|
wheels
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:11 PM |
|
|
tyres
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:13 PM |
|
|
last pic for now...
if you want pics of any specific parts let me know and i'll get them up here as soon as i can.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
ruckus
Veteran Volks Folk
Posts: 2118
Threads: 165
Registered: June 19th, 2004
Member Is Offline
Location: Osaka, Japan
Theme: UltimaBB Pro Blue ( Default )
Mood: Pretty strong for a chalk-pusher
|
| posted on May 18th, 2006 at 06:20 PM |
|
|
Interested in the brake setup if you part out.
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:25 PM |
|
|
ok, you're first in line if i can't sell the whole thing.
kai
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on May 18th, 2006 at 06:38 PM |
|
|
Hi Kai i am interested in the type 4 is it complete? give me a ring Im in Avalon tomorrow afternoon at about 5 and could drop around. Mitchell 0422
802 199
[ Edited on 18-5-2006 by waltermitty ]
23 windows ...8 too many!
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 18th, 2006 at 06:46 PM |
|
|
you have u2u...
kai
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 19th, 2006 at 05:33 PM |
|
|
the type 4 motor is sold!
kai
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on May 19th, 2006 at 09:01 PM |
|
|
Thanks mate. A pleasure. did you make the rugby?
Guys heads up I checked this out today and its a great project he is talking it down.
Its almost rust free, straight as a die and has heaps of spares , heaps.
He is selling at a loss so as to keep it all together parted out it would be worth more.
This will make a nice square for someone.
Mitchell
P.S. the hand polished mags with brand new yokos are sensational, great wheels and tyres very cheap. M
[ Edited on 19-5-2006 by waltermitty ]
23 windows ...8 too many!
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 22nd, 2006 at 04:44 PM |
|
|
thanks for the comments mitchell. i managed to catch about 10 min. of the game in the end, it was packed in the pub!
back to the car....
i had a big tidy up in the garage on friday! i chucked the new doors, the wings and the bonnet back on, it looks a lot more likle a car now!
the seals i have are brand new!
two door seals
a bonnet seal
windscreen seal (the one without the chrome strip in it.
seals for the tail lights
and possibly one or two more i havn't found yet.
the car also has a very tidy carpet (rather dusty right now but will clean up like new).
and an original rear seat.
the front seats are out of a mazda 323 i think.
the b-pillars have the factory cut-outs in so that pop-out windows can be fitted...
anyway, here's a couple more photos...
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 22nd, 2006 at 04:45 PM |
|
|
.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 22nd, 2006 at 04:46 PM |
|
|
this door really is absolutely rust free!!!!!
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 22nd, 2006 at 04:46 PM |
|
|
last pic. for now.
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
76bug
Officially Full-On Dubber
Posts: 215
Threads: 20
Registered: February 24th, 2005
Member Is Offline
Location: canberra
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 23rd, 2006 at 08:55 AM |
|
|
hey very interested in the 1600 with the fuel injection setup. wot type of microtech is it? mt4, mt8 mtx8?????
would u be able to post a pic up?
will make u an offer
alex
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 23rd, 2006 at 04:14 PM |
|
|
i'll get the info and a pic or two for you asap.
as yet i don't want to part it out, i'm still hopeful to sell the whole lot so the resto can be finished....
kai
|
|
|
76bug
Officially Full-On Dubber
Posts: 215
Threads: 20
Registered: February 24th, 2005
Member Is Offline
Location: canberra
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 25th, 2006 at 03:55 PM |
|
|
any luck with the pics? is the injection setup twin throttle bodies?
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on May 25th, 2006 at 05:09 PM |
|
|
sorry, i've not had a chance to get the pics yet.
the motor is a standard late model type 3 motor.
the only change is the microtec computer...
hope this helps.
kai
|
|
|
76bug
Officially Full-On Dubber
Posts: 215
Threads: 20
Registered: February 24th, 2005
Member Is Offline
Location: canberra
Theme: UltimaBB Pro Blue ( Default )
|
| posted on May 29th, 2006 at 09:22 AM |
|
|
any luck with finding out wot michrotech it has?
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on May 30th, 2006 at 07:08 PM |
|
|
I think the motor is a standard TLE type 3 fuel injected system run by a microtec. ( or wolf or something Kai said)
He may correct me I have asked him to find out also.
I know he is flat out ATM.
As for this project this is one solid square, as rust free as you can get and would make a great project.
Mitchell
23 windows ...8 too many!
|
|
|
dubrat
Slammed & Awesome Dubber
Posts: 84
Threads: 29
Registered: May 7th, 2006
Member Is Offline
Location: brisbane
Theme: UltimaBB Pro Blue ( Default )
Mood: a little wide eyed
|
| posted on May 31st, 2006 at 11:45 AM |
|
|
is the project still available?
i would love to see some more pics, if you could email to dub_rat@hotmail.com that would be great
...
|
|
|
type3lover
A.k.a.: The Smashed Repairer
Insano Dub Head
in the garage...
Posts: 796
Threads: 90
Registered: February 2nd, 2005
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: stoked
|
| posted on May 31st, 2006 at 07:21 PM |
|
|
I would like to put my hand up for the door seals and the bonnet seal if they are in as new nick. Please let me know what other seals you have as I am
in need of a few for my '68 notch project!
Cheers!
Toby :thumb
.
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on June 4th, 2006 at 06:08 PM |
|
|
hi guys, sorry i've taken so long to reply.
as mitchell said, i've been flat out....
ok.
i've got a pic of the engine, and one of the microtec.
this should clear everything up.
dubrat- what pictures would you like me to send you.
please reply here or u2u me with what you need and i'll get onto it asap.
as for everyone else.... if dubrat doesn't take the whole project i will part it out, it's been over 2 weeks and i've got to get rid of this thing
fairly soon.
so, if your after parts just wait a few more days...
kai
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on June 4th, 2006 at 06:08 PM |
|
|
the microtec...
| Error |
| Sorry, you must be a registered user in order to download attachments. |
|
|
|
|
waltermitty
Custom Title Time!
Legend when my beer goggles are on
Posts: 1993
Threads: 268
Registered: August 29th, 2002
Member Is Offline
Location: Port Macquarie now Yipee!
Theme: UltimaBB Pro Grey
Mood: Hungry for mor
|
| posted on June 4th, 2006 at 06:49 PM |
|
|
Kai I am still keen on the Micro tech , let me know when you know which way you go. M.
Microtech Engine Management Systems
Microtech MT4/LT4 Engine Management Systems
The LT4 is a FUEL ONLY ecu and will not control ignition. It is designed for use on engines with stand alone ignition systems or as a piggy back
system that just controls fuel delivery on cars that still retain the stock fuel/ignition ECU but with the stock injector outputs disabled."
23 windows ...8 too many!
|
|
|
Kai.A.
Fahrvergnugen
Posts: 915
Threads: 76
Registered: September 29th, 2003
Member Is Offline
Location: Adelaide
Theme: UltimaBB Pro Blue ( Default )
Mood: dubless...
|
| posted on June 4th, 2006 at 07:03 PM |
|
|
should know in the next few days if it's gonna go as one thing or be parted out.
i'll e-mail those pics to you sometime soon mitchell... i've still got to find the second badge....
kai
|
|
|
Fireball xl5
Seriously Crusin Dubber
Posts: 193
Threads: 42
Registered: May 31st, 2006
Member Is Offline
Location: Newtown Sydney/ Jim Clark Country Scotland
Theme: UltimaBB Pro Blue ( Default )
|
| posted on June 5th, 2006 at 11:57 AM |
|
|
Interested in your wheels, what size are they?
|
|
|
| Pages: 1 2 |
