Gday
Does anyone that lives around Baulkham Hills in Sydney have a hubcap rivet tool that I can borrow for a few days?
Cheers
John
bitemeoz Officially Full-On Dubber
355 posts · joined Oct 2003 ·
Hubcap Rivet Tool
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
John when I worked at the dealership we had alocally made one it consisted of a piece of RHS with a locating stud and a pin with a recess for the rivet , the rivet sat in the clip and protruded through the rim, the stud located the rim & then you just pein the rivet until the clip is tight
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
psimitar Son of Jim - Creator of Good
2,506 posts · joined Jan 2009 ·
I just use countersuck allen head 1/4" machine screws with nyloc nuts n washers. Works a treat 🙂
madness is in the eye of the beholder 👍
bitemeoz Officially Full-On Dubber
355 posts · joined Oct 2003 ·
Thanks people went down the drilling a bolt head and grinding the side as per d-train. Worked a treat.